Dirt Devil Reaction Twin Cyclone Upright Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If too much hair, string, or lint is caught in the brushroll, the brushroll can get stuck. If the brushroll is stuck, it will put too much strain on the belt and may cause the belt to break. Remove the brushroll and clean out any debris from the bearings. After replacing the brushroll, make sure that it turns freely.
Often, a belt breaks because the machine is running over the edge of a rug or other thick items, perhaps even the vacuum cord. This causes “snagging.” When this happens, the belt becomes stuck and usually overheats.
If a belt is not tensioned properly, it will ride too loose or too tight on the pulley. A belt that`s too loose on a pulley will cause slippage, which leads to heat build up from friction. This heat will damage your rubber belts and cause the belts to crack and break.
One is to keep the belt clean and lubricated. Another way is to check the tension of the belt periodically, and make sure that it`s not too tight or too loose. The last way is to get your car serviced regularly so that they can inspect the condition of your car`s drive belt and replace it if necessary.
You should replace the belts on your vacuum at least every three to six months if the vacuum is regularly used. This is very important for proper cleaning.
Vacuum cleaners are fairly simple machines. They need power to be transmitted to the vacuum to create a suction force that lifts debris. So, the usual areas that cause suction loss include the wrong height setting, stuck rollers, a faulty gasket, a broken vacuum belt, a filled bag, or a clogged hose.
Luckily, changing a vacuum belt is a very simple repair on most vacuum cleaners. Vacuum owners should never have to take their machine to a shop just for a belt replacement. The first step in this (and any) part replacement is to accurately order the needed part for the repair.
Consumer Reviews On Dirt Devil Vacuum Cleaners

Consumers give high marks to some Dirt Devil models like the Breeze canister and the Featherlite bagged vacuum – where both get on average 4 out 5 stars based on over 200 ratings. That means that Dirt Devil has designed the perfect vacuum for the majority of home users.

No it`s not recommended to suck up water.
You should replace the belts on your vacuum at least every three to six months if the vacuum is regularly used. This is very important for proper cleaning.
Next to the motor, the belt on your vacuum is just about the most important part of your vacuum. Without the belt to spin the brushroll, most vacuums won`t pick up on carpeting at all! If your vacuum uses a rubber belt, check it once a month for cracks, melting, and especially, slippage.
Luckily, changing a vacuum belt is a very simple repair on most vacuum cleaners. Vacuum owners should never have to take their machine to a shop just for a belt replacement. The first step in this (and any) part replacement is to accurately order the needed part for the repair.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

The original belt on my upright Kenmore Progressive broke and I replaced it with the spare that was in the vacuum. The vacuum and spare belt are about 10 years old. Then the spare broke after one vacuuming session and there was a burning smell coming from the vacuum. I ordered new belts and replaced it with the new belt. It seems to be working fine with no smell. I checked the belt after I vacuumed the family room and although it was in tact, the belt was very hot. Is that normal? Should t
ANSWER : The belt heats up due to the friction, as well as being in contact with the shaft of a hot motor. It is normal.

Belt keeps breaking – Dirt Devil Reaction Twin Cyclone Upright Vacuum
ANSWER : In some cases when you by a belt from the brand stores the belts are not always to spec’s. for example: you pick out the belt that’s for your machine you go home and put it on and not even 5 to 10 mins. the belt breaks, thats because the spec’s or not at the company’s spec’s and they break fast. take the same belt from the company and you will notice that the belt can be stretched alot more and is easier to put on. if you put on a new belt and it still breaks, first see if the brush or agitator can move freely. if not then the agitator needs to be replaced. ( fyi : the agitator end caps need to be taken off and cleaned for dirt or hair that gets twisted in there)

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

My dirt devil vacuum cleaner is not working – Dirt Devil M130000 ''i'' Dual Cyclonic Upright Vacuum Cleaner Vacuum
ANSWER : Please specify whether the vacuum motor does not turn on when you flip the switch or it simply does not have suction.

Hoover WindTunnel Self-Propelled V Belt
ANSWER : I had this same problem with the V belt on my Hoover Vaccuum..
.There are three (3) basic things that will cause the brush roll not to spin..
.1. When handle is upright, brush roll is OFF..2. When switch is set for HARD surface, brush roll is OFF..3. Broken/worn FLAT belt or V Belt, brush roll will not spin.
.
.I noticed that the brush roll was not spinning when my vacuum was set for CARPET. After removing the cover I noticed that the V belt was loose, I thought the belt was worn so I purchased a correct replacement belt and installed it, but the new belt was also loose and when I turned the large flat belt pulley it did not turn the V belt pulley at the same time..
.I double checked the surface setting and I had the vacuum switch set for carpet, but still when I released the handle out of the upright position the brush roll would still not spin..
.My aggravation finally led me to this posting on FixYa’s website..
.The first thing I did was checked the screw to the left of the V belt as suggested by ejmjr5 and this did nothing to solve the problem or create more tension on the V belt, even when the upright handle was not in the upright position..
.After playing around with the surface setting control switch/nob I notice that when I moved the switch out of the HARD surface setting and over to CARPET, I had thought that the switch was set for CARPET as it visually appeared, but I was not pushing the switch over hard enough to click it into the CARPET setting mode..
.VOILA, the brush roll now spins correctly even though the V belt seams to be too loose for the pulley..
.You really have to force the switch into the CARPET setting. Be sure that you hear the switch/nob click into place..
.Now you can effectively clean up after that hangover of a party!.
.Burp!

The cyclone tubes have stopped spinning. – Dirt Devil Reaction Twin Cyclone Upright Vacuum
ANSWER : HELLO,The electric motor has a thermal switch and is self-resetting so there.is no re-set switch. Make sure the air filter for the exhaust is clean..Also make sure that the height adjustment is not too low causing strain.on the motor. Always bring the height down to where the brushes just.make contact with the carpet. It is possible that the thermal safety.switch is tripping due to a bad switch. In that case If it’s still under warranty you can contact.Dirt Devil to loge complain.
thanks for using fixya,

take care.

Keeps shutting off – Dirt Devil Reaction Twin Cyclone Upright Vacuum
ANSWER : Take the air canisters out and clean them. Mine were totally clogged by pet hair. Open the canisters, twist the rotators counterclockwise and pull out. Easy to clean and put back in. You will be amazed! Try to also wash the foam filter out.

Belt keeps breaking on vacuum. – Dirt Devil M085580 Featherlite Plus Upright Vacuum
ANSWER : Clean the hair off the bearings. Remove the brush. Pry off the end caps and remove the hair under and around the bearings. I used a kitchen fork.