Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

How does carpet cleaning work? A BISSELL Carpet Cleaning machine forces a warm cleaning mixture deep into your carpet to blast out dirt and grime as built-in brushes help root out deeply embedded dirt. At the same time, powerful suction immediately pulls out the dirt and liquid.
Not really. But you might be a little disappointed if you expect this tool to heat up its own water. Despite its name being the Bissell ProHeat, this carpet cleaner doesn`t actually heat up the water it uses to clean your floors.
The ProHeat® Carpet Cleaner has a built-in heater to heat tap water up to 25 degrees hotter for optimum cleaning.
Hot water loosens and softens dirt more quickly, making it easier to remove, and it also helps to kill bacteria. That`s why we recommend filling up your carpet cleaner`s tank with warm water. Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process.
BISSELL® carpet cleaners are ready when you need them. From upright carpet cleaners to portable carpet cleaners, BISSELL makes spot and stain removal a cinch.
Many people may not know that the Bissell Crosswave is not just a vacuum, but can also be used as a mop. This is a versatile product that can save you time and money. The Crosswave is a floor cleaning machine that uses a brushroll and suction to clean your floors.
You don`t have to use the Bissell solution, but it is optimized for use in their machines. This means it won`t streak, leave residue, need to be rinsed, or leave buildup in your machine.
A: Yes it can be used as a vacuum without water.
The BISSELL ProHeat 2X Revolution Pet Pro Carpet Cleaner is a powerful, lightweight and easy to manoeuvre carpet cleaner that achieves professional results and the powerful suction helps carpets dry in 30 minutes.
Bissell Proheat Deep Cleaner

It features a patented hot water heater that provides maximum steam cleaning effectiveness via continuously heated cleaning action. The unit`s 12 amp cleaning system is quite powerful, removing tough and ground in dirt and stains from carpeting, upholstery, and other fabrics.

Just empty the water out of the tank after each use. Doing so will prevent leaking and extend the life of your filter.
Take the all-natural power of steam wherever you need to clean with a handheld steam cleaner from BISSELL®. Our steam cleaners allow you to remove tough grime from hard surfaces like showers, windows, and countertops—all without harsh chemicals.
Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process. HeatWave Technology means that the heat that is generated by the motor gets redirected to underneath the water tank.
Bissell Proheat Deep Cleaner

It features a patented hot water heater that provides maximum steam cleaning effectiveness via continuously heated cleaning action. The unit`s 12 amp cleaning system is quite powerful, removing tough and ground in dirt and stains from carpeting, upholstery, and other fabrics.

Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process. HeatWave Technology means that the heat that is generated by the motor gets redirected to underneath the water tank.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

No Water My Bissell rug shampooer does not eject water or saop whan I pull the saop trigger on the handle. I checked both filters and they are clean. Then, I removed the container that sucks up the water and pulled the saop trigger, water barely came out of the tubes. I tried to clean the rug in our family room and the rug was not wet when I finished, no water coming out to clean the rug. HELP HELP HELP!!! I live in Colorado is there a Bissell repair shop near Denver, HELP!!! Thanks Dominick ema
ANSWER : Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn’t squirt, check for the seal at the bottom of the tank, it needs to be on the tank, not in the hole, this is for the soap bottle also, there is a seal on the bottom of it as well. The flow indictor cap is leaking air or maybe is too tight. If you had the top cover off, make sure that the tubes are routed right so as not to get pinched when the cover is put back on, the smart mix knob should be in the water setting and that the piston is on the bottom of the smart mix knob. Pump is bad. Try running a mix of vinegar and water to see if that unclogs the lines. Is the top cover and the base tight together in the back, sometimes the top breaks loose and it will raise up and it can’t spray, just re-fasten it down.
.
.Bissel’s Number is: 1-800-237-7691, they can tell you were to get service in your area.

I have a Bissel 9300-C 0714 BC Carpet Shampooer. It was working great and all of a sudden it stopped working. It still sucks up dirty water but it does not spray water onto the carpet. I can get it to spray water through the smallest hand attatchment but not through the large hand held piece on the base of the machine. I really hope you can help me, I am a dog groomer and I really need my machine to work properly. I can get it to spray water out of the smallest hand attatchment but
that’s all t
ANSWER : The spray jet has become clogged from the soap…. just clean it out. same thing happened to my attachment.

Either of my bissell porheat turbo 2x or my bissell pro heat don’t have suction i would like to try and trouble shoot if i could due to the fact i am having difficulty finding a small machine repair center in my area could you possible help me or send a link which could help me find solution these machines are not more then a year and a half old if that thanks for your time and help warmest regards rebekah majors
ANSWER : Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101

The steam mop was only used 3 times.stopped working. It has now stopped working altogether. I have only had it for a month. I did not save the receipt because after the third time working I thought it was okay. I am very disappointed and have a hand shop vac of Sharks which has been working for a year. I have been discouraged from buying another one of your products now that the steam mop has quit working after 3 times. I followed the exact instructions how to use it. Model S3101/ 120V 60HZ
ANSWER : Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

,/../m,/.

I have only had my shark steam mop for about a month and only used it twice. I tried to use it yesterday and it would not work. The green light came on and it worked for maybe ten seconds, then it completely shut off. I tried switching outlets and draining the water but nothing worked. It still doesn’t work today either. What do you think is wrong? Does this product have a warranty?
ANSWER : Yes has warranty call Shark/europro.

Bissell 7920e It work help
ANSWER : Need more info

Water and cleaner not coming out, The machine is only 6m old and was working fine, I have cleaned every where I can to see if there was a blockage but nothing is working. The heater is working, there is a suction but the water and soap will not realease when triger is pulled. it will not work on on the tool spay.
ANSWER : Check the complede length of the hose. You may find a crimp in the most inconvenient place. You say you cleaned everything … can you blow through the hose where the cleaner comes out? (don’t drink anything!)

I have a problem with my Maytag Legacy carpet shampooer. The brushers will not work at all. The vacuum part works and everything, just the brushes do not move or work at all. Can you help?
ANSWER : Make sure that the brushes are turned on. There is a switch on the bottom that says brushes on or off.