Bissell 8910 ProHeat Clear View Upright Vacuum\015 Upholestry cleaner doesnt spray\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
You may have stalled the brush motor. To reset, turn off and unplug, then plug back in and turn on. The brush roll may have lodged debris or other entanglements keeping the brush from rotating.
Make sure the Clean Water Tank is seated correctly on the machine. If it isn`t, turn off and unplug your machine, remove and reseat the tank until it clicks into place. This is also a good time to check for cracks or leaks in the tank. If it`s damaged, a replacement can be ordered on BISSELL.com.
Check both the brush roll and chamber for any large debris that may clog or stop the brush from spinning. If it is damaged or broken, you can buy a replacement on bissell.com. Replace your brush roll by re-inserting. Using the coin again, turn the groove counterclockwise to lock the brush in place.
Your Brush Roll has an ON/OFF Button right under the Power Button, giving you control of the Brush Roll. The Brush Roll will automatically turn on when your Adapt Ion is turned on in the stick vacuum mode. However, the Brush Roll will automatically shut off if there`s too much debris on it.
Your Brush Roll has an ON/OFF Button right under the Power Button, giving you control of the Brush Roll. The Brush Roll will automatically turn on when your Adapt Ion is turned on in the stick vacuum mode. However, the Brush Roll will automatically shut off if there`s too much debris on it.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I have the Bissell Proheat (7901) It will pick up water and the hand tool works fine. I noticed that the red indicator stopped spinning. Then I noticed no water was coming out. If I put down water using the hand tool, the vacunme will pick it up. When I called Bissell they had me do something with the indicator. When it didn’t work they said take it in for repair.
The tool attachment for the hose on my Bissell ProHeat 2X CleanShot won’t spray soap or water. The bristles on the tool rotate without a problem and the suction is working fine, it just won’t spray water when I pull the little gray trigger on the tool.
My bissell proheat 2x carpet cleaner is not spraying from the bottom or sucking up when turned on. The hand tool works just fine. I have made sure it was on floor cleaning when I used it to try and clean my carpet. the busshes are working but nothing else is happening this cleaner is about 21/2 years old and has only been used maybe 5 times so it has not had alot of use.
I have a Bissel 9300-C 0714 BC Carpet Shampooer. It was working great and all of a sudden it stopped working. It still sucks up dirty water but it does not spray water onto the carpet. I can get it to spray water through the smallest hand attatchment but not through the large hand held piece on the base of the machine. I really hope you can help me, I am a dog groomer and I really need my machine to work properly. I can get it to spray water out of the smallest hand attatchment but
that’s all t
ANSWER : The spray jet has become clogged from the soap…. just clean it out. same thing happened to my attachment.
I have a Bissell 9500 proheat 2X cleanshot w/dry Aire it works great on cleaning carpets. When I try to use the tools it will spray but will not suction. How can I get the suction to work when using the tools?
ANSWER : Ensure the handle is in the upright position and the selector is on tools,
Please take the time to give this solution a fix ya rating
clarkco
9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum: I have a Bissell proheat 2x deepcleaner 9200 model…
Bissell proheat 2x manual – Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
ANSWER : Hi,
You can download and print the instruction manual in PDF format by clicking this link.
Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.
Hope this solves your problem. Thanks for using FixYa.
I have a Bissell Proheat Turbo 2x model 9300. It has stopped spraying at the floor. The hand tools will work so I assume this means the problem is at the base somewhere. I cleaned the nozzles but don’t know what to try next. It has always had a problem with dumping too much cleaning solution as well, don’t know if this is a contributing factor
