Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
First, check to make sure the clean tank has water and/or the water & formula mixture in the tank. If your tank is empty, this could be the reason your machine is not spraying. You will need to fill your clean tank again. Reseat the tank and ensure it sits snug on the machine.
Check the suction inlet on the body of the vacuum and clear it of debris if needed. Remove the hose from the base of the machine and remove any debris as needed. If necessary, you may use a broom handle to unclog the hose by pushing through both openings.
Your dirty water tank may not be secured tightly. Check the rubber tab on the dirty water tank and press firmly on all edges to secure it tightly. The accessory hose door also needs to be closed securely. Check the door and make sure it is locked in place.
There could be several factors as to why your BISSELL PowerFresh steam mop is not producing steam. First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank.
There could be several factors as to why your BISSELL PowerFresh steam mop is not producing steam. First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank.
Remove the hose wand from the base, and check for a clog in the wand or base. Next, use a long, narrow object such as the crevice tool or a broomstick to clear away obstructions along the length of the hose.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My brand new bissel little green proheat pet series is spraying solution however it’s not hot when it comes out. I put hot water in the tank & turned the heater on. Isn’t this the whole point?
ANSWER : Have you checked the user manual? Can be found at http://www.bissell.com/searchresults.aspx?searchtext=little green&mode=userguides
.
.If there is no element then the water will cool down naturally.
.
.If there is no element then the water will cool down naturally.
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
Bissell ProHeat Carpet Steam Cleaner stopped spraying.
ANSWER : The problem was a clogged heating unit which is located in the lower handle. There are two clear hoses going up the inside of the left leg of the lower handle that go to the heater and to the in-line water switch all within the lower handle. I unplugged the metal heating unit water lines and electrical connections (label the connections as you take them apart if you have a hard time remembering things…there were seven connection in all be it water and/or electrical). Removed the heat unit out and then removed the 6 screws holding the heater cover. Inside was a white powdery pasty debris (lime deposit ?) and the water path was clearly blocked in four different places. I cleansed the water trough with a little water and soft toothbrush and several toothpicks then reassembled. If you need new washers go to Orchard or ACE hardware. Take the old rubber washers(they are red) with you for comparison. I didn’t need new washers…I just gently cleansed them. I immediately ran clear water through the machine and actually cleaned the carpet with a water rinse only. Will go back and finish the carpet the right way tomorrow. I had only used my machine three times before this happend over a three year period. A friend told me to always rinse it two maybe three times with clear water after using it and before storage. This took me exactly 42 minutes to disassembly and reassemble. Cost savings is several hundred dollars since I have a 5 bdrm house and would need a professional cleaner to do the small dirty traffic lanes all around the house.
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
ProHeat Turbo Deep Cleaner Upright Steam Vacuum: Hello, My Bissell Proheat is not spraying water, …
ANSWER : Most likely the pump belt is worn and needs to be replaced. Here is the belt you need:
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
Spray doesn’t work on my Bissell Proheat 2x 8920 took apart but couldn’t find where the heater is
ANSWER : It’s in the handl
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
I have a bissell proheat complete 2x. When I press the trigger to spray the water, it sprays for a couple of seconds and then the pressure drops and stops spraying. I turn turn it off for about a minute, turn it back on and does the same thing again. Jose Cortez
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101.
.
.tyeuydet
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
My Bissell ProHeat Pro-Clean upright cleaner won’t spray either water or solution onto the floor, however it does spray when using the attachments on the hose. The belt is fine, I’ve actually tried all of the troubleshooting steps indicated in the User Manual. I’m not even certain where it is supposed to be spraying out from! Any ideas where/what to check for?
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101 .
.56
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
Bissell 9500 ProHeat 2X does not spray water – Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
Bissell, ProHeat, ProTech won’t spray water.
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101 .
.895r
Read Full Q/A … : Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
