Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

ProHeat® Using the marks on the inside of the formula cap, add 7 oz of BISSELL 2X formula to tank. Add water to the tank until you reach the original formula fill line.
This machine uses HeatWave Technology™ which helps maintain consistent water temperature throughout the cleaning process by redirecting the heat of the motor to help maintain the temperature of the water.
The battery status indicator lights will illuminate when charging. For maximum run time, charge the unit for 4 hours prior to use. You`ll know your SpinWave® Cordless is fully charged when all three lights are illuminated.
To remove the hand vacuum, grasp its handle while holding the body of the stick vacuum in place. Pull the hand vacuum directly away from the unit. When you are done, replace it by putting the hand vacuum back in place, and pressing firmly. You should hear a click to confirm the hand vacuum is fitted securely.
Using the marks on the inside of the formula cap, add 7 oz of BISSELL 2X formula to tank. Add water to the tank until you reach the original formula fill line. The next time you fill your tank, use the new fill lines instead of measuring the formula. For more help, download a template.
ProHeat® Using the marks on the inside of the formula cap, add 7 oz of BISSELL 2X formula to tank. Add water to the tank until you reach the original formula fill line.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Can’t put together my model 1631 bissell i bought in the salvation army and would like to know how to connect what
ANSWER : Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101.
.fjjjg

I would like to know where i can get a manual for the bissell 3760-4 model. i bought this sweeper used and i would like to get a book on the parts . thank you for your help
ANSWER : BISSELL User’s Guides can be downloaded at www.bissell.com
.On the front page under Customer Service click on User’s Guides and enter the model number of your unit.
.User Guide will be displayed as a PDF file.

I would like to know where i can get a manual for the bissel 3760-4 model. i bought this used and i would like a book on parts i might need down the line. thank you.
ANSWER : BISSELL User’s Guides can be downloaded at www.bissell.com
.On the front page under Customer Service click on User’s Guides and enter the model number of your unit.
.User Guide will be displayed as a PDF file.

Filter I bought this Hoover a few years ago– just now about to use it first time. I cannot find my user’s manual and don’t know how to change the filter– or to clean it or whatever I am supposed to do with it. Also, there is a handle on one side of the unit that seems to be attached to an empty chamber or canister kind of thing. It looks like it should pull out, but it does not budge. I really would like to have a manual, but can’t seem to find one. Is there a similar model that is still
ANSWER : This is not for the exact same model, but should help you out:
.http://edge.maytag.com/epipubs/56511B47.PDF

Hello, I just bought a Bissell Powergroom (model 92L3-W) vacuum and a Bissell Proheat Pet (model 8910-3) deep cleaner and I love them both. My problem is, when we unpacked them we somehow lost the manuals; I think I had too many helpers that night – they may have gone out to the trash with the boxes. I need replacement manuals if you would be so kind as to help me out. Could you email me a manual for each of these two machines, or tell me exactly where to find them online? I’ve been looking, but
ANSWER : Follow the link below and enter the model numbers to access the User’s Guides.
.http://www.bissell.com/customer-support/

The Bissell Proheat 2X doesn’t release the solution. I have cleaned everything I can see and understand there is a filter somewhere. Would like to know if that would even help… ANY OTHER SUGGESTIONS WOULD BE APPRECIATED! No men around just us girls and we have NO idea how to fix it!! Thanks-Cheri
ANSWER : Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101 .
.gjk

Replaces the belt on dirt devil dynamite pluse model put everything back together started it and it burt the new belt up that fast. I put it around the beater brush and the metal bar I thought it should go around, yet it seemed like there should be something else there to put the belt on. What do you suggest? Do you have picture I could go by?
ANSWER : The metal bar you put it around if the bar itself does not spin it is going to burn the belt up. Every thing that the belt is supposed to go around has to turn or the belt will rub on the piece not moving and brake.

I have a 350E memory craft and I would like to know how to register a new USB or PC Card so I can use the pattern. Also would like to know how I can download patterns on to my Laptop.

Thank you.

ANSWER : Welcome to FixYa!.
...First you need to format the USB..Important: You memory stick USB is less than 1 GB. (The one that came in the package)..

    .

  • Put the USB stick ito your machine and using the set key,
  • .

  • Page through using the bottom arrow key – you will come to format ( this is also in your manual )
  • .

  • Select the USB memory stick – and wait until it formats, this could take 1 – 5 minutes.
  • .

  • Once formatted, you can copy the designs from the computer to the memory stick.
  • .

  • Put your free embroidery designs (example Winnie Pooh free embroidery logo) in the EMB5folder and they should show up on your Janome 350E.

.Note: If you see the EmbF5 then it has already been formatted by the Janome. ..

    .

  • Go back to your computer and click on that folder.
  • .

  • You will see ANOTHER sub-folder called Design (or My Designs, or something similar).
  • .

  • That is where you will need to copy over your embroidery files.
  • .

  • Then put the USB back into the Janome 350E sewing-embroidery machine and and they should show up.
  • .

  • Don’t put more than 6 designs on the USB at any one time or it will take forever to load.
  • .

  • If you don’t see the one that you want, then hit the “next page” icon on the Janome screen.
  • .

  • Make sure the USB stick isn’t too large, otherwise it will not be recognized or shows a poor performance.

.Important: Don’t copy more than 100 designs in one folder..
.The video below shows how to use the PC Card and USB in your sewing machine..Start at 4:15 (4 minutes and 15 secs.).
.
..To download Designs, go to http://www.needlework.ru/.It will require you to register and sign in..
.Thank you for using FixYa..Have a great day..Jas247