How To Clean Very Dirty Tile Floors With Vinegar & Baking

If you have tile floors that are very dirty, it’s time to clean them. Not only will this help to make your floors look nicer, but it will also protect them from dirt, dust, and other allergens. To clean your tiles with vinegar, start by mixing 1 cup of white vinegar with 1 tablespoon of baking soda. Use a mop or a bucket to pour the mixture onto the tile floor, and scrub it into the surface with a circular motion. Be sure to rinse the floor thoroughly after cleaning it this way.

Alternatively, you can use a vacuum cleaner to clean your tile floors. Start by putting the vacuum cleaner in the highest setting and moving it across the entire floor. When you reach the area where the dirt is, stop and use the suction tools to pick up the dirt. Once the dirt is picked up, move on to the next area. Remember to avoid using water while cleaning your tile floors!

What You’ll Need

To clean tile floors that are very dirty, mix 1 cup of vinegar with 2 cups of warm water. Soak a cloth in the mixture and wring it out thoroughly. Use the cloth to scrub the floors until they are clean. Be careful not to scratch the floor. Next, pour a layer of baking soda over the surface of the floor and use a broom to dust it off. Be sure to avoid getting any of the baking soda on your furniture or other surfaces. Finally, rinse the floor with water and dry it off.

How to Do It

If you have very dirty tile floors, you can easily clean them with vinegar and baking soda. Vinegar is a natural cleaner that will remove dirt, oil, and grease from the surface of the floor. Baking soda is also a natural agent that helps to alkalize the soil, which in turn helps to break down oils and grease. First, mix together one cup of vinegar and one cup of baking soda in a bowl. Pour the mixture onto the floor, working it into the cracks and crevices. Leave the solution on the floor for several hours, or overnight. Wipe away any residue with a cloth soaked in water and then dry.
If you have sealant or wax on your tile, you will need to strip it off first. You can use a scrub brush and hot water, or a solution of one cup of white vinegar and one cup of water. Wet the brush and scrub the sealant or wax off the tiles. After removing as much of the material as possible, rinse the tiles with clean water.


If your tile floor is very dirty, you can clean it with vinegar and baking soda. First, mix 1 cup of white vinegar with ½ cup of baking soda in a bowl. Wet the floor with water, then pour the vinegar mixture over it. Stir well to combine. Let the solution sit for 10 minutes, then scrub the floor with a brush or mop. Pour a layer of fresh water over the mess every few minutes to rinse it off. Finally, dry the floor with a towel.