Dyson DC07 Bagless Upright Cyclonic Vacuum\015 Too much suction when using hose\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The suction control slider is located at the front of the cleaner head. The ball located between the bin and the cleaner head.
TheDC25 has 220 air watts of suction power. The Dyson DC25 uses a HEPA filter. What exactly is a HEPA filter? A HEPA filter (high efficiency particulate air) is a high-efficiency air filter that is capable of removing at least 99.97 percent of airborne particles 0.3 micrometers or larger.
Developed by a team of 370 engineers globally, these latest vacuums use a Dyson Hyperdymium motor which generates up to 230 air watts of suction[1] and 5-stage filtration captures 99.99% of dust particles down to 0.3 microns[2] for a powerful deep clean.
What is a Good Suction Power for a Vacuum Cleaner? An upright cordless vacuum cleaner should have at least 100 air watts to effectively clean a variety of floor surfaces, with the best Samsung vacuum cleaner reaching up to 210W*.
Luckily, excessive suction can often be solved. The simplest solutions are to open the air inlet valve, lower the suction setting, or increase the height of the brush bar. But it`s also important to check that the belt is functioning and that the brush roll isn`t stuck.
Producing up to 115 Air Watts, it generates powerful suction on carpets and hard floors.
The Dyson V7 is a few years old, but by all accounts still a great cordless vacuum. It has a 30 minute run time, 100 AW of suction power, and tons of cleaning attachments. It`s easy to use, works great on both carpets and hard surfaces, and is priced well for the features and overall performance.
Which Dyson vacuum is the most powerful? In terms of sheer suction power, the Dyson Ball Animal 3 Extra is the most powerful option in Dyson`s current lineup, offering 290 AW, or air watts, of suction power. Among the brand`s cordless stick vacuums, the Dyson V15 Detect is the most powerful, with a rating of 230 AW.
The Dyson Ball Animal 2 is the most powerful vacuum we`ve ever tested. The most powerful upright we`ve ever tested, the Dyson Ball Animal 2 vacuumed 76.3% of our testing dirt in a single pass, far exceeding the upright average of about 33%.
Next, you need to consider suction power. Typically expressed in Pa (pascals), this is a measurement of how powerful the motor is inside a robot vacuum. A good number to look for here is around 2,000Pa or above for an effective clean.
Q2. Is a 1200 suction chimney good? Ans: A capacity of between 700 – 1000 m3/hr is adequate if you like healthy, low-oil cooking. However, a chimney with a suction power of 1200 m3/hr or more is apt if you frequently make deep-fried items.
Suction pressure should be kept at less than 200 mmHg in adults. It should be set at 80 mmHg to 120 mmHg in neonates. [3] The catheter size used for suction should be less than 50% of the internal diameter of the endotracheal tube.
With high suction pressure, your AC system may experience one or more problems. Poor cooling is probably the most common symptom. High suction pressure will restrict your AC system`s ability to cool your home. The condenser coil may struggle to release heat stored within the refrigerant.
All vacuum cleaners operate based on air flowing from the opening at the cleaning head or tool, through the vacuum cleaner and the bag and/or filter system and then out the exhaust port. This airflow is created by the vacuum motor, which also may be referred to as the suction motor.
The two main indicators to determine vacuum power performance are water lift and airflow. The water lift is measured in mmH2O, mbar or kPa. It represents the suction force and is the reference parameter for vacuuming liquids and heavy materials. The airflow is measured in m3/h or in l/s.
220 air watts. Ideal for pet hair. Length of hose 4.4m.
Our Verdict. The Dyson V8 is better for most uses than the Dyson V7. The V8 performs far better on bare floors, where it clears large debris like cereal with much less difficulty. It also has a longer maximum runtime and has a battery life indicator to let you know how roughly how much charge is left.
The key differences with the design are that the main unit is slightly larger than the V6. The larger unit means that the Dyson V7 has a larger dust bin capacity at 0.54L (up from 0.4L on the V6) and a longer battery life at 30 mins run time (up from 20 mins on the V6).
Based on the design and overall look of the Dyson V8, the V7, which was launched in 2017, uses a similar digital motor and accessories. However, being a less expensive model to purchase, it has some differences to the higher priced V8.
As for battery life, the V7 runs for up to 30 minutes on powerful mode. The V6 lasts for 20 minutes and the V8 runs for up to 40 minutes. Crank the cordless vacuum cleaners to “Max” mode and the V7 will last you a mere 6mins, the same as the V6 and a little behind the V8, which lasts a minute longer at seven minutes.
Air watts refer to the number of watts used by the vacuum cleaner to carry a unit of air through an opening or nozzle. The higher the air watts, the higher the suction power.
High-suction vacuums tend to use motors with 1,000 watts or more. Suction pressure, which is measures in kilopascals, is another great way to discern a vacuum`s power, although fewer manufacturers disclose this number. But if they do — look for a range of between 5 to 20 kilopascals.
Cylinder vacuums are typically more powerful and have a larger dust capacity, so need emptying less frequently. They also have a larger cleaning radius — the length of the cord — than upright vacuums. That`s why you`ll find the professionals use this type of vacuum cleaner in offices and hotels.
Dyson V15 Detect

The Dyson V15 has a whopping 230 air watts, which is the most powerful suction we have ever seen. Thanks to over 60 minutes of runtime and three different power modes, the cordless vacuum achieves excellent cleaning results.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

No suction Hello – any help with this would be much appreciated!

I just changed the bag and filters. The machine runs, seems normal, but there is no suction. There is no blockage of the hose, as indicated by the fact that that little viewer window above where the hose connects to the unit is not showing the red portion that it shows when there is something blocking the hose (god, this is hard to describe!).

If I disconnect the hose and put my hand over the hole, I feel some suction. But

ANSWER : Well, it actually sounds like there is a blockage. Try removing your hose and dropping something through it, like a quqrter. If it comes through, no clog. If it is clogged, I believe that machine has a blower on the upper part of the cleaner (maybe in the bag compartment towards the top. You can take out the filter holder and plug the hose in there and run the unit . Does the blockage come out? If not, Try shaking the hose, or you can put a stiff wire in it to try to free it. Do not run water through it. If there is no blockage at all, then you will probably need to take it to a service center. But I am pretty confident that we are looking at a clog situation. Let me know if this fixesya! Thanks, Rene (vacuum Doctor)

No Suction I get great suction in the hose, but when I plug the hose back into the unit, there is no suction and the air flow indicator line goes completely red. I've changed the bag and filters. I took the small panel off the back and made sure there is no clog, and took the hose off to make sure there was no clog there. Still no suction. Please help.
ANSWER : I about to say that’s always a clog of some sort that causes that

Lost suction my DCO7 lost suction in the hose I started taking it apart and cleaning it and looking for clogs (probably more than I should have) and when I put it back together it has awesome suction in the hose but no suction in the base. It just pulls the pine needles up (christmas tree) but they never appear in the “bag” compartment and when I look they are just all gathered in a clump in the bottom by the brush.
ANSWER : Hi.
.
.Remove the sole plate turn the 3 plastic screws to unlock & lift off.
.
.Now remove the blockages that have accumilated from the oppening of short clear hose.
.Check you can turn brush roller & check belt.
.
.Now reassemble switch on pull handle back & look under machine is brush spinning ?
.
.If not check the knob on side of machine is in drive (D) position.
.
.http://dysonmanuals.llc.nu
.
.Chris..

My DC17 suction hose doesn’t have any suction occasionally.
ANSWER : Check the seal on the filter is not broken,And check for any blockage at the bottom of the pickup pipe.

Hose Problem The hose broke just above the cuff on the inlet end of the hose.  I found that the hose doesn’t thread into this cuff but appears to be heat bonded in some way. Can I get a replacement cuff or do I have to replace the hose?
ANSWER : Looks like you can just get the hose, part #38479-4, It should just screw into the adapter or it may be glued in.

Dyson vacum cleaner lost suction
got the DC14 and it doesn’t seem to have much suction in the floor head, the hose still has good suction. I have checked all the paths for blockage and there is none.
ANSWER : Hey, this is Leland with Crucial Vacuum,
.
.If your unit’s suction has decreased there could be several reasons.
.
.Firstly, the motor may be the problem. If you hear any noises while the machine is running, you should contact the original manufacturer for trouble shootingsolutions.
.
.Secondly, your vacuum may be in need of new parts. By changing either the brushroll or belts, you should be able to increase the quality of the suction.
.—
.You can purchase replacement parts for the DC14 direct from Crucial Vacuum with free shipping and an exclusive 10%coupon for Fixya.com readers, use code: FIXYA10
.http://www.crucialvacuum.com/catalogsearch/result/?q=dc14
.
.I hope this was helpful! If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendlycustomercare representatives on the line ready to assist you.

Suction hose I can’t get the suction hose to work…and I have cleaned it out to make sure it isn’t plugged. There is a small amount of suction just not enought to pick anything up…..the floor part works great…what could be the problem
ANSWER : I would first double check the hose, remove it and drop a marble through it to be sure. make sure the bag is new and also check the filter underneath the bag if it is clogged it could cut the suction.

No I did not my hose on the dirt devil does not have much suction on it I took everything apart and found nothing wrong no clogs anywhere but when I add an attachment to the hose it loses all suction…I looked for a switch to change from regular vacuuming to attachment found nothing why is this??????? Need a manual where can I find some information and a download on line manual??????
ANSWER : Try this. There should be a little filter unerneath the tank. just clean that filter or replace it. (9 times 10) thats the problem.
.
.good luck.