Euro-Pro Ultra Steam SharkTM II Hard Surface Steam Cleaner Vacuum\015 My Shark steam cleaner (Euro-Pro steam canister) when plugged in gets warm but both the “ready” and “steaming” lights do not come on and no water or steam come out when the switch on the handle attached to the hose is turned on. (Although i can hear a click in the shark when pushing this button) Any suggestions?\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The Cleaning Nozzle is clogged

Calcium and other minerals may build up in the nozzle, so you may need to clean the nozzle in order to produce steam. To do this, either use the nozzle cleaner provided with the Steam Pocket Mop, or use a straightened-out paper clip.

Never use bleach, powered detergent or fabric softeners as they may damage or leave a coating on the Dirt Grip pads that will reduce their cleaning performance and absorbency.
Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
Heating Element. A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.
Fill the Tank With Vinegar

Fill the tank with distilled white vinegar or cleaning vinegar. Avoid using other types of vinegar because they may have sediment that interferes with the cleaning process.

What Should I Use? Good quality tap water. If you don`t have issues with hard water stains and buildup, your tap water is good.
Which is better at removing stains and mopping spills? Our testing has found that all steam mops remove stains fairly well, with marginal differences, and are likely slightly better than a regular mop and bucket due to the heat and vapour produced by the steam.
First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.
The Shark Floor Steamer, also known as the Euro-Pro Shark Steam Mop, is a device for cleaning tile, wood and other hard surface floors that uses heat to lift off stains. It can also be used on carpet with an extra attachment.
Make the steam cleaning of grouting part of your weekly cleaning schedule, and you should never have to use any form of cleaning agent again. Shark`s steam mops are powerful, mobile and precise, and they`re all you need to keep mildew, grime and soap scum from accumulating on your bathroom and kitchen tiles.
It is safe to use on many different types of flooring

I used this Shark steam mop on my ceramic kitchen floors, but it is also rated for use on sealed hardwood floors, marble, and stone tile.

The vacuum has a safety feature that turns off the vacuum when the vacuum gets to a certain high temperature or overheats. This happens because the vacuum has a motor protective thermostat. If the vacuum turns off due to overheating, the thermostat has to be reset before you can use it again.
That depends greatly on the vacuum itself and what you`re using it for. A Shark vacuum that spends its days cleaning pet hair and other everyday messes might last as long as a decade. Investing in the best portable steam cleaner can last for a long time as well if they`re well taken care of.
There are a few disadvantages to using steam cleaners. One is that they can be expensive. Another downside is that they require a lot of water, which means you will need to empty and refill the tank often. Finally, steam cleaners can take longer to clean than other methods.
What can`t I steam clean? Steam can warp unsealed floors, melt plastic, and cause laminate floors to swell. Don`t steam clean these surfaces. Other surfaces on the do-not-clean list: cold windows, unglazed tile, those covered in water-based paint, and delicate surfaces.
I used baking soda to fix the problem. Mix water with a teaspoon of baking soda in a bowl, and then pour the mixture into the water tank (fill up to the brim). Then, turn on the steam and hold the steamer upside down, with the nozzle AWAY FROM YOU. Once the light turns green, turn on the steam.
First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.
Rather, use a steam cleaner with a hydrogen peroxide 3% solution, which will kill off any harmful microorganisms while keeping your little ones safe.
First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.
Overheating is probably the most common cause of a Shark vacuum cutting out. The protective thermostat inside the vacuum does this automatically to protect the motor, so restoring the vacuum`s airflow should solve the issue.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet
ANSWER : Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn’t blocked as well.

I have a bissell quickwash 1950-e. I bought it Jan. 2006, and have only used it 8-10 times, I live in a very hard water area, so I though if I put some vinegar in with the cleaning solution it would get rid of any hard water deposits, unfortunatly the solution went lumpy in the tank and stoped spraying out water, I have opened it, hose clean, sprayer not blocked, x at bottom of water container when depresed water trickles out, component that opens the x when water container placed, also ran wate
ANSWER : Hard to say what is causing your problem, replacing the cap and insert on the water tank may help, part #2041111, even tho it may trickle out water when depressed, they can still be bad. The other thing would be the rod not relesing the water like it should. The big draw back to this model is Bissell has obsoleted all of its parts and most are no longer available. Might be wiser to buy new.

No Water My Bissell rug shampooer does not eject water or saop whan I pull the saop trigger on the handle. I checked both filters and they are clean. Then, I removed the container that sucks up the water and pulled the saop trigger, water barely came out of the tubes. I tried to clean the rug in our family room and the rug was not wet when I finished, no water coming out to clean the rug. HELP HELP HELP!!! I live in Colorado is there a Bissell repair shop near Denver, HELP!!! Thanks Dominick ema
ANSWER : Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn’t squirt, check for the seal at the bottom of the tank, it needs to be on the tank, not in the hole, this is for the soap bottle also, there is a seal on the bottom of it as well. The flow indictor cap is leaking air or maybe is too tight. If you had the top cover off, make sure that the tubes are routed right so as not to get pinched when the cover is put back on, the smart mix knob should be in the water setting and that the piston is on the bottom of the smart mix knob. Pump is bad. Try running a mix of vinegar and water to see if that unclogs the lines. Is the top cover and the base tight together in the back, sometimes the top breaks loose and it will raise up and it can’t spray, just re-fasten it down.
.
.Bissel’s Number is: 1-800-237-7691, they can tell you were to get service in your area.

The Hoover Steamvac Widepath will NOT pick up water. The dispenser with cleaner DOES have water. The TANK that would receive the dirty water is NOT full. All tanks are on properly and the machine will still not pick up the used water. I found a tear in the interior hose leading to the receiving tank and repaired throughly with electrical tape. Still will not pick up the water. Any suggestions?
ANSWER : Sounds like a clogged air path (no vacuum action) from the floor pick-up to the collection tank. Take the tanks off and deal with the vacuum problem alone. The collection tank should have a air exit vent–is it clear? Check the interior hose that you repaired–is it clogged? Remove the bottom plate and inspect the air path from it. Because this machine deals with water, clogs can become like concrete! Hope this helps!

I have a Bissell Proheat 2XTurbo carpet cleaner. No water will come out when I squeeze the trigger. I have filled the solution tank and the water tank. I read the troubleshooting in the manual and have tried turning it off for a minute and restarting and nothing. I took out both tanks and reseated them and nothing. It has sat for over a year but did not have any water in the water tank. Some solution was left in the solution tank. How can I make the water come out? HELP!
ANSWER :

Call BISSELL Consumer Services.
.

1-800-237-7691
.

Mon-Fri: 8am to 10pm ET
.

Sat: 9am to 8pm ET

Water to use in my Shark cleaner
ANSWER : Hi,
Bottled spring water is the best…

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Dead shark in the water
ANSWER : Call them at 1-800-798-7398
.Have the model number, the country it was made in and the date it was.made. All found on sticker on bottom of unit. They are foreigners that.answer the phone, so be prepared to spell everything. It takes 3 weeks.to get the parts but I found them to be inexpensive.

We have the water hooked up at the back of machine. there is a spout for the water to come in and fill the ice tray.but is does not. If we turn the water on it fills up the space under the ice basket. I keep getting red light and then the two smal llight one ice and one water come on. We can hear the motor trying to fill the ice try and then lights come on. Please help me this so I can use this product. It did not come with a manual.
ANSWER : The water inlet valve on the back of unit opens when the ice maker needs water. If the valve doesn’t seal good because of sediment or wear it will continue to drip and when the water reaches the ice maker supply tube it will freeze blocking the fill tube.. You can take the water line off the valve and watch to see if it drips.
With the fill tube blocked with ice the water can drip down the back wall or drip into the ice bin or just stop up. You can use a hairdryer to thaw the tube out.