Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Your dirty water tank may not be secured tightly. Check the rubber tab on the dirty water tank and press firmly on all edges to secure it tightly. The accessory hose door also needs to be closed securely. Check the door and make sure it is locked in place.
Pull back slowly to pick up all the water.

However, you need to work slower than you would with a vacuum to pick up all the dirty water from your carpet. When you pull the carpet cleaner back, work slowly to allow it to suck out the water from deep inside the carpet.

Carpets that still look dirty or have stains reappear after cleaning is a result of something called wicking. This is due to over wetting the carpet, the backing, and pad which causes them to return back to the surface once dry.
Most shop vacuums can remove only 10 to 20 gallons of water per basin.
Extract Moisture

Use a shop vac that can handle dry and wet messes or a wet vacuum. Shove the hose attachment deep into the carpet to attain as much suction as possible. After vacuuming up as much water as possible with the shop vac, lay down towels and walk on them (your weight will wick the water into the towels).

I boil the water and pour it in carefully—boiling hot. Most home cleaners do not use the power of boiling water, but I do. I have done this for 14 years now, and without any problem.
Regular vacuum cleaners are not designed to pick up water and other liquids. If you are ever tempted to run the vacuum cleaner over a puddle of water, remember that you run the risk of electrocution and serious damage to the machine.
Only Vacuum a Dry Carpet

If you vacuum a wet carpet, dirty water could enter the motor and cause damage to it. In severe cases where the carpet is too wet, you could even risk electrocution. Even in a mild scenario, you`d still end up with a soggy mess to deal with when you eventually empty the dust bag.

It`s really straightforward – all you need to do is sprinkle a generous among of baking soda over your wet carpet and let it sit. The baking soda not only absorbs moisture, but it`ll also absorb any nasty odours.
If a machine fails to remove most of the moisture from your carpet, it usually means a lot of dirt and bacteria has been left behind too. To make things worse, carpets that are still wet after over 36 hours could even be causing mould and mildew between the carpet and underlay.
Your carpet will be only slightly damp to the touch after your cleaning. Most carpets typically need 6-10 hours to dry completely. However, it could take up to 24 hours to dry depending on the time of year your carpets are cleaned, and the air circulation, humidity and temperature in your home.
Steam cleaning is a method that can be used periodically but should not be used regularly, as it can wear on the carpets unnecessarily. Finally, steam cleaners can often leave moisture in the carpet, which can take upwards of 24 hours to dry.
Check the suction inlet on the body of the vacuum and clear it of debris if needed. Remove the hose from the base of the machine and remove any debris as needed. If necessary, you may use a broom handle to unclog the hose by pushing through both openings.
Check the dirty water tank and make sure there are no clogs in the hose below it. Remove the filter and clean debris from both the screen and filter. Also empty the dirty water tank and leave the filter out to dry completely before replacing it.
Cleaning a Heavily Soiled Carpet

Baking soda is an excellent choice for cleaning heavily soiled carpet, as it absorbs mud, grease, and other unsightly residues. To use baking soda over your entire carpet, sprinkle it heavily along the surface and then grind or push it into the fibers using a fresh, dry sponge mop.

Cleaning a Heavily Soiled Carpet

Baking soda is an excellent choice for cleaning heavily soiled carpet, as it absorbs mud, grease, and other unsightly residues. To use baking soda over your entire carpet, sprinkle it heavily along the surface and then grind or push it into the fibers using a fresh, dry sponge mop.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet
ANSWER : Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn’t blocked as well.

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

My carpet cleaner (bissell proheat plus) is not steaming, dispensing cleaner. Seems like there’s a little thingy that should be spinning or turning….. When I work a small area of carpet, it just leaves behind dry blobs of carpet gunk like pet hair. I had to use a carpet sweeper to clean up. FYI – I filled the cleaning fluid container and after trying to clean the carpet, it did empty out but the carpet isn’t wet. Any tips? The manual doesn’t help.
ANSWER : You need to replace the pump belt. Here is the belt you need:

Bissell ProHeat Belt

Dirty water not going into container – Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
ANSWER : Make sure filters are clean

Hoover carpet cleaner not picking up water – Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
ANSWER : Assure the ring gasket is in place under the hood. A round rubber gasket must be in place on the round tube under the hood where the recovery tank sits to connect the vacuum from the motor to the round tube on the bottom of the tank.
.
.In addition, make sure the recovery tank lid is properly aligned to the tank to seal.
.
.Lastly, make sure the square duct is latched in place in front of the recovery tank, that links the nozzle plate to the tank lid.

Dirty water not returning in hoover steamvac – Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
ANSWER : Recovery lid not on correctly

Water is not being discharged. I have filled the reservoir that holds the carpet cleaner fluid And I have filled the water container. I know how to use the cleaner, it has always worked, But now, no water is being discharged to the carpet. I turn it on, squeeze the trigger, but nothing comes out. The wheel that is suppose to spin (to indicate that water is being discharged) is not spinning. Everything else works. I.e. the suction works, and the hand held accessories work.
ANSWER : That means that the pump belt is worn and it needs to be replaced. You can get a replacement belt and view the manual here:

Bissell Pump Belt

The cleaner/water solution dispenses into the carpet, cleans it, pulls out the pet hair, but no dirty water goes into the dirty water reservoir! is all this dirty water going into my carpet?
ANSWER : The pet hair may be clogging the water return inlet I suugest you clean the bushes and inlet as well