on the carpet.
Bissell SpotBot Robotic Wet/Dry Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Empty and rinse the dirty water/collection tank after each use or when the dirty water tank reaches the indicated maximum fill line. To remove the tank, lift up the dirty tank latch and pull the tank out. Dump out the dirty water and rinse out the tank.
Pull Tank off machine. Hold Tank over sink. Open water Plug to release dirty water. Rinse under sink to clean.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My carpet cleaner (bissell proheat plus) is not steaming, dispensing cleaner. Seems like there’s a little thingy that should be spinning or turning….. When I work a small area of carpet, it just leaves behind dry blobs of carpet gunk like pet hair. I had to use a carpet sweeper to clean up. FYI – I filled the cleaning fluid container and after trying to clean the carpet, it did empty out but the carpet isn’t wet. Any tips? The manual doesn’t help.
ANSWER : You need to replace the pump belt. Here is the belt you need:
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
Do you have a manual that explains how to use this and how to clean it after you use it.
I am in need of basic instructions to clean up a mess on the carpet.
I am in need of basic instructions to clean up a mess on the carpet.
ANSWER : The User’s Guide for the Bissell SpotBot Robotic Wet/Dry Vacuum is available here:
.
.http://canada.bissell.com/images/UserGuides/1200_English_French.pdf
.
.http://canada.bissell.com/images/UserGuides/1200_English_French.pdf
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
Hoover Jet and Wash 1500w S6254 001. Used once with great difficulty as assembly and use instructions are hard to follow.Now will not work as carpet shampooer at all, although assembly is correct as far as I can see and both motor and pump appear to be working and I am using the recommended cleaning fluid.Hoover website is no use at all in solving the problem.No cleaning fluid is being drawn up from the tank in to the cleaning fluid hose.There is suction from the suction hose so the problem appe
ANSWER : I am having the same prob my uncle got me one i cant find the manual anywhere to set it up the prob i have is where does the handle to make the water go out connect tooo ??? on the main pipe that sucks it back up i have tried every which way but not the right way obviously lol as for it not spraying mine did for all of 2 secs but think it was because i got a bit happy with the solution so gunna just try water and if its too hot it stops it spraying properly too !!
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
Need instructions for use of dirt devil spot scrubber; have borrowed one to use to get some serious spots off of carpet; no instructions with it; need to know how to fill the container and how much solution to use for cleaning.
ANSWER : To have a manual mailed to you at no charge, please contact our customer service department at 1-800-321-1134.
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
This was my grandmothers machine and when she passed there was no owners manual so I am not sure how to use the settings on it or oil it properly. I so want to use it cause it was hers but don’t want to mess up the machine. She never even got a chance to use it before she passed away. I just have no owners manual. I know how to use sewing machines but this one is older and I don’t want to mess it up.
this was passed down to me. and a manual would help in so many ways. even if it was sent in a
this was passed down to me. and a manual would help in so many ways. even if it was sent in a
ANSWER : May I get the manke and model # so I can help you more
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
We have a Bissell Proheat Cleanshot 2X Model 9500 Steam carpet cleaner. The first time we used it things were great. The second time we used it it left tracks in the carpet. We have no idea what caused this. We tried using the machine on an entirely different carpet and it did the same thing. After vacuuming the carpet about 10 or 12 times, the tracks are still embedded in the carpet – HELP!!!! We’re read and reread the manual and contacted customer service and received no help.
ANSWER : First things first. It’s only the second time you have used the machine, so it must be fairly new. If you have a receipt and the unit is less than a year old you should take it to an authorized Bissell repair center and have the machine inspected under warranty.
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
I have a Hoover SteamVac SpinScrub with Clean Surge Carpet Cleaner. I loaned the cleaner to my son, who lives 3 hours away from me. My son returned the Steam Cleaner to me on Easter Sunday. My son failed to return the Owner’s Manual. I need to clean my ottoman. I have never used the upholstery & stair cleaning tool. Would you be able to e-mail me the instructions for this chore? My e-mail address is: [email protected]. My name is Kay. Thank you!
ANSWER : Hi,
I would be glad to send that. But, you never Mention the Model Number and there are Various Models introduced by Hoover.
Let me know the Manual and within Few Minutes, i would be able to send you one more email which would have the Manual Details.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ‘ Fixya ‘ and have a nice day!!
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
Carpet stained recently cleaned my cream coloured carpet in my entrance hall with a carpet cleaning product, wet foamy spray type, ran out of this and found a part bottle of a different brand in my cupboard, used this to finish off however must be some sort of reaction and carpet gone a greenish colour i think (colour blind sorry ) any idea’s of any product that might restore my carpet, will try anything, nothing to loose. thank you Peter McGurk Goole East Yorks
ANSWER : Ok in the future try to have carpet cleaned only by a pro. For spot cleaning use white paper towels or dish towels and warm water. (ONLY WHITE) 99% of fabric is white and then dyed to color and if you use a color cloth you might pull the dye from the cloth into the carpet. Now what you can try is your basic dishwashing detergent like electrosal with warm water and a dishtowel. little at a time try to blot not rub. try AFTA if that doesnt work. wet the rag first with warm water. pour the afta on the wet rag not on the carpet.
Read Full Q/A … : Bissell SpotBot Robotic Wet/Dry Vacuum
