Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Description. This genuine Dyson vacuum part is the reset switch for the Dyson DC24 and D25 uprights. This switch needs to be activated if you experience a power surge while vacuuming, and your vacuum turns off as a result.
Reset the machine without the app

The machine allows you to clear your WiFi settings, restoring the machine to the factory default. Press and hold the `Standby ON/OFF` button on the purifier for longer than 20 seconds.

If you find that your machine is turning off intermittently, the filter in your vacuum is most likely full and covering the ventilation system. Remove the filter, then empty and wash it. Allow the filter to dry for at least 24 hours, or until it is completely dry.
To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on. Please note: In normal use, the Brush bar automatically turns off when the machine is upright and automatically turns on when the machine is in the vacuuming position.
To reset the machine, turn the power off (using either the power button on the remote or the Main body), wait 60 seconds and then turn back on.
It`s possible there`s a power consumption issue, with there just not being enough residual charge to run the machine. A new battery should fix this. My other thought is that it`s overheating. If too much power is pushed through the motor, which MAX power does, it could stop after a few seconds if it become hot.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
Over time, all batteries are subject to degradation. So if your run time has declined when the machine is not in Max / Boost mode, it might be time to buy a new battery. All our machines come with a 2-year initial warranty that includes the battery.
The brush bar button is on the left next to the power button.
The Dyson V6 is designed so that you can store the unit on the charger. Storing the Dyson on the charger will not harm the battery and it is not necessary to use the unit until the battery is depleted.
When your Dyson no longer powers on even after charging the most likely cause is a damaged battery. This means the battery will no longer hold a charge and will need to be replaced. Once a new battery is purchased you can learn how to replace it by visiting our battery replacement page here.
It`s important to reset your filter life after you have replaced your filter. Resetting your carbon filter life Press and hold the Oscillation button on your remote control. Before changing your filter, switch off and unplug your Dyson purifier fan heater.
A Dyson handheld that keeps cutting out is known as pulsing. A Dyson V7 pulsing problem can be very frustrating! A few reasons why your Dyson is pulsing are potential blockages or problems with the bin or filter.
It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening. Make sure there`s no dirt lodged in the top part of the bin.
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
In many cases, you probably can repair a Dyson yourself, especially when it comes to common issues (see below). However, even if your machine needs some extra TLC by a Dyson expert, it can be worth getting it repaired.
If your Dyson vacuum no longer powers on even after it has been charged, the vacuum`s battery may be damaged. If the battery is damaged, it will no longer hold a charge and will need to be replaced. Use the Dyson DC58 Battery Replacement page for instructions on how to replace the vacuum`s battery.
Blue light flashes 10 times indicating charge required. Charged until light goes out, same thing happens.
If you`re looking for a complete rebuild, you can expect to pay $100 or more. However, you may be able to get your Dyson repaired for free if the service is covered by the product`s warranty. According to Dyson, cordless vacuums have a two-year warranty while corded models have a five-year warranty.
The main difference between the Dyson V8 Animal and V8 Absolute is that the V8 Animal is designed to powerfully suck up and eliminate pet hairs.
If there is a strong burning smell coming from the motor area of your Dyson DC14 or DC07 then it is most likely that your motor has burnt out.
Summary. Dyson batteries should last around 2-6 years before needing to be replaced. This wide range reflects the fact that how you care for and maintain the battery will affect how long it lasts. If you want your vacuum`s battery to last longer, make sure it`s stored at room temperature.
Clean Your Dyson Vacuum:

Thoroughly clean the dust bucket and flapper by shaking or tapping it to release any dirt that has become clogged if your Dyson is pulsing, stopping, or making noise. Rinse your filter monthly, even if it looks clean on the outside.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

DOES THE DYSON ANIMAL HAVE A RESET BUTTON. – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Normal. 0. . . false. false. false. . . . . . . . . MicrosoftInternetExplorer4. .. . ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0cm 5.4pt 0cm 5.4pt;.\011mso-para-margin:0cm;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;.\011mso-fareast-font-family:”Times New Roman”;.\011mso-ansi-language:#0400;.\011mso-fareast-language:#0400;.\011mso-bidi-language:#0400;}....Most Dyson cleaners have a thermal cut-out to protect.the motor from overheating in the event of a restriction to the airflow. So, if anything causes it to overheat, it will.switch off. If this happens, leave the cleaner switched off for at least two.hours, as it will not start again until it has cooled down.
..
..The most common cause of a.cut-out is that the cleaner has a blockage or the filter needs washing. A high room temperature may also trigger.it. Before you continue vacuuming,.ensure the filter is clean and there are no blockages. You can download the user guide at www.dyson.co.uk/support/. Just click on ‘Get Expert Help’ then ‘Using my Dyson product’ then ‘User Guide’.


Hope that this information is useful to you.


Kind regards
Darran
Dyson Customer Service

Where is the reset button on a dc14? – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : There isn’t one. If the motor is not running you might have a bad on off switch or this model does have a heat sensor that shuts down the motor that may be faulty. You will need to send it back to dyson.

Dyson DC 14 upright not suctioning – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Start by cleaning the filters. Watch this video: .
.
.

How do I replace the brush on my dyson dc14 – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Hi its Darran at Dyson.

If your DC14 has a brush control, we would only recommend that a suitably trained person attempts to replace the brush bar.

We can arrange a repair so that one of our engineers can replace this for you, and as part of the repair they would be able to look at any other issues you may be having with your machine.

If you would like to discuss your options, please contact us on 0800 298 0298 (UK) or 1866MYDYSON (US).

Kind regards
Darran
Dyson Customer Service

Replacing clutch drive belt dyson dc14 – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Chris,
.I am just trying to find an owners manual, but I can not find one anywhere. Your link did not work. Can you help with another link?

My dyson animal won't stand up – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Hi do you still require assistance with this?

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Dyson DC14 hose flattens while extened – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : The hose may have been stepped on or crushed while extended. Replacement of the hose may be necessary