How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Checking for blockages
It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening. Make sure there`s no dirt lodged in the top part of the bin.
If you find that your machine is turning off intermittently, the filter in your vacuum is most likely full and covering the ventilation system. Remove the filter, then empty and wash it. Allow the filter to dry for at least 24 hours, or until it is completely dry.
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
When your Dyson no longer powers on even after charging the most likely cause is a damaged battery. This means the battery will no longer hold a charge and will need to be replaced. Once a new battery is purchased you can learn how to replace it by visiting our battery replacement page here.
Most problems arise because of a blockage – if not a dirty filter or cyclone unit, then something could be caught in the wand or the brush bar. Once again, the lack of suction could be caused by a dirty filter or a blockage somewhere in the vacuum`s system.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums.
To fix a clog in the hose, feed one end into a garbage bag, and poke the other end with the back of a mop pole, until you push the clog material out into the garbage bag. To fix a clog in the vacuum, whether it is a canister or bag, use your finger to feel for a clog. Pull as much of it out as you can and discard.
Check the vacuum cleaner to see if it tripped a circuit breaker or blew a fuse. Check the circuit breakers, or fuses and, if it has tripped a circuit breaker or blown a fuse, simply re-set the breaker, or replace the fuse, and switch the vacuum on again.
Dyson Cyclone V10 cord-free vacuums are engineered to make a pulsing sound to let you know if something is preventing airflow from passing through the machine. The LED blockage indicator will also continue to flash for up to 1 minute.
Clog located in the vacuum hose
Turn the unit on and feel the suction at the end of the hose handle. If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end.
A strong odor from the shellac that coats the copper coil windings is an indicator that the motor is about to or has burnt out. If the motor is still running, even if it turns on and off by itself as it is heating and cooling, you can still run the motor until it gives up for good.
In many cases, you probably can repair a Dyson yourself, especially when it comes to common issues (see below). However, even if your machine needs some extra TLC by a Dyson expert, it can be worth getting it repaired.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
Even with the powerful suction for which the Dyson brand is known, the Dyson vacuum can get clogged. If this happens, you can easily remove the clog and get back to vacuuming quickly.
Interviewed by Fast Company (May 2007), Dyson asserted the importance of failure in one`s life, “I made 5,127 prototypes of my vacuum before I got it right. There were 5,126 failures.
Based on the latest survey results, Consumer Reports estimates that close to half of Dyson stick vacuums will develop problems or break within five years, compared with around a quarter of the stick vacuums from Shark, the most reliable brand for this type.
Pet owners, we recommend 1-2 years between service, light use every 2-4 years between services. Heavy use serviced annually.
The main difference between the Dyson V8 Animal and V8 Absolute is that the V8 Animal is designed to powerfully suck up and eliminate pet hairs.
Description. This genuine Dyson vacuum part is the reset switch for the Dyson DC24 and D25 uprights. This switch needs to be activated if you experience a power surge while vacuuming, and your vacuum turns off as a result.
Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.
Your filters get clogged with bacteria, dust, smoke, mold, and other particles. These can all affect the air quality in your home as well as the performance of your vacuum`s cleaning abilities, if the filter is clogged you will find the suction and general performance of your vacuum will be minimized.
Again, due to the small particle size of baking soda or freshener product, these can clog the pores of your vacuum`s bag or HEPA filter. Or it can “cement” debris into the cyclones of your bagless vac! This can drastically reduce suction resulting in poor cleaning performance and cause clogs to form.
Fine particles. Fine particles are no match for even the strongest vacuums. Construction dust, makeup, used coffee grounds, fireplace ash, and other fine particles can burn out the motor and be released back into the air. It`s best to sweep these items up to keep your vacuum – and yourself – safe.
The simplest place to start: empty your dirt container. Debris in the main cyclone passage will cut suction rapidly. If the container was really full, you should also check the filters because they can get loaded with dust if the Dirt container is too full. Test the vacuum, and see if the suction is back.