Miele S548 Bagged Canister Vacuum\015 The rewind works fine, it’s the power to the carpet head that is not working..\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Canister vacuums separate the motor and dirt container from the handle and (power) head. A hose connects the handle and head to a canister which houses the motor and dirt container. The choice of canister vs. upright vacuums depends heavily upon your usage, personal preference, and budget.
Despite the rejection of the cosmological constant by Einstein and others, the modern understanding of the vacuum, based on quantum field theory, is that vacuum energy arises naturally from the totality of quantum fluctuations…
All vacuum cleaners operate based on air flowing from the opening at the cleaning head or tool, through the vacuum cleaner and the bag and/or filter system and then out the exhaust port. This airflow is created by the vacuum motor, which also may be referred to as the suction motor.
A canister vacuum consists of a wheeled body that is attached to a vacuum wand and power head via a flexible plastic hose. The canister portion of the vacuum contains the main motor, filter, and any dust bags; depending on the model, the power head may also contain a smaller motor.
Bagless vacuums, as the name suggests, don`t use a replaceable bag that collects the dust and dirt from the surface. A bagless vacuum cleaning machine is compact and uses a dust cup or chamber to store the dust and dirt. The dust cup used in the vacuum cleaner can be easily emptied and cleaned.
Description: A vacuum cleaner is an electric household appliance for removing dirt by means of a vacuum. Inside the housing, a motor creates the necessary air flow, using a blower.
Any negative pressure significantly below standard atmospheric pressure (760 Torr/mmHg, 29.9 inHg or 14.7 PSI) is considered a vacuum.
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
There are three main causes for your Miele to not power on: The power switch has failed. The cord reel is damaged. Your motor has gone bad.
The bag is reusable. It needs better instructions though. For instance, it`s washable but if you put it in the machine you`ll ruin it as the plastic part is fragile. It clogs with dust so every other use or so you do need to wash it to keep your suction and other filters from clogging.
In conclusion, we can say that an electric field can exist in a vacuum.
A regular sized household vacuum cleaner will use between 500 and 3000 watts of energy, an average best selling model will use around 1400 watts.
The suction power is measured in Watt (W) and is typically between 250 W and 450 W for machines with 1 motor. The suction power is to be measured at the end of the tube of a complete vacuum cleaner (i.e. with tube, hose and filters – but without nozzle).
Surgical Suction Machine
Voltage: 230 V. Current: 4 +- 0.5 Amps. Frequency: 50 Hz. Power Consumption: 200 W.
Air watts refer to the number of watts used by the vacuum cleaner to carry a unit of air through an opening or nozzle. The higher the air watts, the higher the suction power.
They generally have better suction and flow rate, which can mean easier and faster cleaning for your cleaning team. Canister vacuums are quieter than other types of vacuums, which can be helpful in quiet environments like hospitals.
For a large home, the power and easy handling make a canister a good choice. And if you have a lot of above-the-floor cleaning tasks such as drapes or upholstery, or a lot of stairs to deal with, a canister makes more sense than an upright vacuum.
A bagged vacuum cleaner works in the traditional way of using a replaceable bag as a filter to trap the dirt while allowing air to flow through the bag. Bags must be replaced when they are full. Bagless vacuum cleaners use filters to trap dirt and debris in a dirt cup or chamber that can then be emptied.
In general, bagged models tend to work more efficiently than bagless vacuum cleaners because they have an extra layer of protection for their filtration system. If someone in your household lives with allergies or asthma, it`s in your best interest to choose a model that will filter out the air as best as possible.
A universal motor is typically used as suction motor across vacuum cleaners. The universal motor is a series DC-motor that is specially designed to operate on alternating current (AC) as well as on direct current (DC). Universal motors have high starting torque, operate at high speed, and are lightweight.
The suction motor is one of the most important parts of a vacuum cleaner. It is this motor which takes the electrical power from the power source and converts it into mechanical power in the form of suction with air flow.
An upright vacuum cleaner should be around 100 air watts and a cylinder vacuum cleaner needs to be about 220 air watts.
What is a Good Suction Power for a Vacuum Cleaner? An upright cordless vacuum cleaner should have at least 100 air watts to effectively clean a variety of floor surfaces, with the best Samsung vacuum cleaner reaching up to 210W*.
So a 1000W vacuum cleaner will use 1 kilowatt (1000 Watts) of electricity in 1 hour. The point here is that it is a consumption measurement, rather than a power output measurement… it tells you nothing about suction. If you want to use more electricity, then use a vacuum cleaner with higher wattage.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Power head attachment works great when plugged into the hose part of the vacuum. The problem is when I attach it to the tube for normal use there is no power. I have checked all the connections and switched the power switch on and off still no power from tube to power head.
Is there anything else I can try? Model Callisto
Is there anything else I can try? Model Callisto
ANSWER : Try having someone turn the machine on and off while you pull the cord in and out with the cord more angled towards the on/off switch. Sometimes these models have a break in the cord rewind and will not put the power through to the motor.
Keep in mind this is repairable, and if the unit is less than 5 years old it should still be under warranty.
Good luck .
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
Our Electrolux canister vacuum just stopped working when we were vacuuming the floor. The power does come on when the power head is attached but as soon as the power head is removed the power shuts off. I tried pressing the reset button but that doesn’t help. Is there a solution that I can try at home?
ANSWER : Sound like you problem is in the connection going to the power head you will see a small screw on the power nozzel where it joins to the handle take out the screw and take it a part you will see where one of the bars have been disconnect from the power.
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
The motor on my Epic 6500 works, the hose is sucking, but the power head isn;t working… I tried the sidestep power head and that one works. Ive opened and replaced the belt and that is fine. The bulb was already burned out and wasn’t replaced so I cant tell if theres power to the head. What else could it be?
ANSWER : Connect the power nozzle directly to the hose and try.
.Check the terminals where the wand connects to the PN. If any are discolored or cracked, that may be the problem.
.Open the PN and check for loose or broken wires and connections. Repair or replace as necessary.
.The reset switch could be broken or worn out. You can check this with a continuity tester or multimeter.
.If none of these solve the problem the vacuum needs to be taken to your local Aerus Electrolux store for diagnosis and repair.
.
.http://www.aerushome.com/storelocator/
.Check the terminals where the wand connects to the PN. If any are discolored or cracked, that may be the problem.
.Open the PN and check for loose or broken wires and connections. Repair or replace as necessary.
.The reset switch could be broken or worn out. You can check this with a continuity tester or multimeter.
.If none of these solve the problem the vacuum needs to be taken to your local Aerus Electrolux store for diagnosis and repair.
.
.http://www.aerushome.com/storelocator/
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
Hooked everything up per directions. I plugged it in to the closest electrical outlet and nothing happened. The lights did not light up, the connected wall control and sensors leds do not light up. It appears the unit doesn’t have power. The electrical outlet socket is fine as everything else I plug into it works fine. I have tried every other electrical outlet available. The unit won’t power on from any outlet, and all of those outlets run other things, like power tools an refrigerators
ANSWER : Dear Davehibshman,
Firstly; dismantle the plug and replace the fuse with the same rating as the one you have just taken out. Replace the plug cover, put the plug into the socket and try again. If this doesnt work, there may be a problem with the internal fuse (if one is fitted). Two choices here, either refer this unit to a qualified service personnel/ the place where you got it from, or do the job yourself (which will save you a whole bunch of cash). In your circumstances, I would take it back to the place you got it and ask them to put the fault right, or replace the unit completely; if it is past its warranty or guarantee time, then get back to me with a make and model number of the unit, and I will give you step-by-step instructions on how to solve this.
Yours sincerely
Oz
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
Power head has power but motor won’t run
ANSWER : Circuit brealer switch may be bad, but the fact that Rainbow nozzle made this strange sound makes me think that it may have happened because there is something wrong with the motor.
.
.While unplugged – remove the brush and belt. Try turning brush ends – see if they yurn easily… Try turning the motor shaft – see if it turns and if it does – if it turns smoothly and if makes any strange sounds…
.
.To really test the motor you can just bypass the circuit breaker switch.
.
.While unplugged – remove the brush and belt. Try turning brush ends – see if they yurn easily… Try turning the motor shaft – see if it turns and if it does – if it turns smoothly and if makes any strange sounds…
.
.To really test the motor you can just bypass the circuit breaker switch.
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
Power head and wand connection is intermittent.
ANSWER : If there is a rubber bumper on your power head you must slip it off before the two halves will separate.
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
Power to power carpet head
ANSWER : Once again remove the electrical connections and clean it and also blow the dirt and then fit it tightly and carefully.if anything broken inside replace it.
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
I have a tank style vacuum. When I vacuum with the power head it dims and slows down when I push the power head back and forth, but it powers back up louder when I stop pushing it If i remove the powerhead from the hose the vacuum works fine.
ANSWER : Most likely the belt. Thats the cheapest so try it first
Read Full Q/A … : Miele S548 Bagged Canister Vacuum
