bout a year after i had it
Electrolux UltraLux 2000 Bagged Canister Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Why Does My Electrolux Vacuum Head Turn On and Off? Typically, an intermittent on/off issue has to do with a connection between the vacuum head and the hose handle.
If the bag full light keeps coming on, you can first try adjusting the dial on top of the vacuum cleaner. If that does not work, then you need to change the control valve. This is an internal component of the canister and is directly below the dial.
Actor Lloyd Bridges was the company`s spokesperson. In 2000, the North American rights to the Electrolux brand name were sold to Electrolux Group of Sweden, which since 1968 had been unaffiliated. The corporation that originally manufactured Electrolux vacuums has been known as Aerus since 2001.
Originally known as Electrolux in the USA in 1924, Aerus continues to be a leading name in providing quality residential vacuum products.
If your vacuum cleaner keeps turning off, this could be due to the following reasons: Blockages – check the hose and head for any obstructions. Filter – always check your filters, if these are clogged this could be causing the vacuum cleaner to work harder and lose suction power.
Overheated Motor

If your vacuum was working fine and then suddenly shut off, it may have overheated. Most vacuums are equipped with a thermal protector safety switch that won`t allow the motor to run when it becomes overheated. You will need to wait for 30 minutes to 2 hours, depending on your machine, to try again.

A flashing or blinking airbag light could mean there`s a problem with either your battery or the airbag module itself. If your car needs a new battery, you need to replace it first before attempting any other repairs on the car.
Electrolux has now decided to exit Russia and divest the business to local management through a sale of its Russian subsidiary. A capital loss of approximately SEK 350m will be recorded as a non-recurring item affecting the operating income for Business Area Europe in the third quarter 2022.
A few things you can check to try and solve:

Let the product cool down for a minimum of 2 hours on the charging stand before starting it again (stick vacuum cleaners only) Charge the vacuum cleaner (stick vacuum cleaners only) Check that the cable is connected to the mains. Check that the plug and cable are not damaged.

Where are Electrolux products made? Today, Electrolux manufactures its appliances out of factories in Sweden, Mexico, U.S.A., Turkey, China, Ukraine, Poland, and Germany.
AB Electrolux (commonly known as Electrolux) is a Swedish multinational home appliance manufacturer headquartered in Stockholm, Sweden.It is the world`s second-largest home appliance maker by 2010 market share (after Whirlpool.
Founded in Sweden in 1919 by entrepreneur Axel Wenner-Gren, Electrolux has shaped living for the better for 100 years by reinventing what great taste, care and wellbeing experiences for our consumers. This is our story.
Overheating usually occurs because the dust bag has not been emptied, filter has not been cleaned or there is a blockage in the floor tool, wand or bent hand piece. If your vacuum shuts down unexpectedly, make sure you turn the vacuum off and unplug it from the wall socket.
If your Roomba® i Series Robot Vacuum is not turning on or is not able to charge, rebooting your robot tends to solve most related issues. To reboot your Roomba: Press and hold the CLEAN button for 20 seconds. After you release the button, the light ring will show a white clockwise swirl while it reboots.
Some vacuums have an in-line thermal fuse (often located between the switch lead and the motor coil). If the fuse is blown it will need to be replaced. – Check your home circuit breaker – it may have tripped. – Some vacuums have a brushroll on/off control.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
Problems can occur when overused or clogged filters cause the vacuum motor to overheat. This not only shortens the motor life but causes a loss of suction. In some cases, total motor burn out can occur.
The airbag warning light should only stay on when there`s a problem with the airbag system in the car. Every time you turn on the car, the computer in the vehicle checks the system. The light comes on for a few seconds and then goes off to show that it`s working.
The indicator comes on to alert you that the front passenger`s front airbag has been turned off. This occurs when the front passenger`s weight sensors detect 65 lbs (29 kg) or less, the weight of an infant or small child, on the seat. Children age 12 or under should always ride properly restrained in a back seat.
Alternatively called the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.
Swedish multinational home appliance manufacturer Electrolux also owns a number of other brands, including AEG, Chef, Dishlex, Kelvinator, Simpson, Westinghouse, and Zanussi. You`ll find some of the company`s products, including washers, and dryers made in Thailand. Electrolux refrigerators are built in Mexico.
Make sure that the machine contains enough moist content since dry content may result in erratic cycle times (cycle stops after a minute) If there is not enough moist content in the drum, the programme may finish prematurely.
If your washer is not starting, the lid switch or door switch may be defective, or the door strike may not be engaging with the door lock assembly. Both switches can be tested with a multimeter for continuity. However, the washer`s wiring diagram or tech sheet may be required to determine which terminals to test.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Electrolux ultra lux shuts on and off every 30 seconds no lights light up bag light etc. its pretty new and hardly used it started doing this about a year after i had it
ANSWER : Try turning the knob on the top of the canester all the way to the right and try it again.

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.

I have a Electrolux Epic 6500 SR canister vacum cleaner. It is nine years old and for the past few weeks it has started shutting off for no apparent reason.The symbol for bag change lights up and it cuts off, but even after I have put a new bag in, it still does the same thing. Do you have any suggestions? There is a little button or switch that the top of the bag fits on. Do you think it could be the problem?
ANSWER : Your machine is probably clogged, look through the wands, look in the bottom attachment, to see if there is anything stuck there. You can also drop a marble through the hose itself to see if anything is stuck there as well. To unclog the hose try holding the attachment end of the hose were you would normally plug the hose in. ( the goal is to **** the clog out the way it came in).

While vacuuming the red light for the bag of the vacuum came on and the vacuum stopped. The bag was no where near full so I replaced it with a new bag – same problem. It vaccumes for a minute or then stops with bag light on. It is the correct bag for the machine – so what’s the problem?
ANSWER : I’m assuming this is the Epic 6500 or similar model.
.Detach the hose, turn vacuum on. If it runs, place palm of hand against inport hole. If it shuts off the problem is with either the control valve setting or the control valve assembly itself.
.For cvs, turn dial on top of vacuum all the way to the largest dot, and try above test again. If that doesn’t work, then it’s the CVA. It needs to be cleaned or replaced, which is an in shop job. Fro repair, take it to the nearest Aerus Electrolux store. I recommend a full clean and service to remove any dust/dirt from the motor, fan assembly, and other internal parts.
.
.Another problem, which relates to the dial setting, is that fine dust will quickly clog the pores of the bag, resulting in the machine “thinking” the bag is full. Turning the dial to the proper setting helps get the bag fuller. The middle setting is the normal setting, and is for areas without fine dust and sand.

Press the power button on – good got a green light (new battery)
press the clean button – got a green light

iRobot runs for a couple of seconds and stops, then starts, then stops. After two or three times I now have a red light on for the Status.

All of the wheels seem to be clean. I used compressed air to clean the underside. But still have the start stop problem.

ANSWER : How many times does the red light blink before it pauses?

Over heating? My 10 gallon 4HP shop vac has started shutting off after about 30 sec. after I turn it on to use. It smells real hot after I shut it off. I have changed the filter and the bag, which did not solve the problem. Any suggestions on what the problem could be? It’s only about 31/2 years old and I really don’t use it all that much, mainly for getting up dust and cob-webs from my garage.
ANSWER : It sounds like you need to replace the motor in it . thank you for using fixya

My new H2O Mop Ultra (Danoz) seems to heat up ok then when the light switches to green and I start using it, the orange light comes back on as well as the green. Produces steam to start with but then it starts to spit water too and everything ends up wet. Any ideas on whats wrong or should I just send it back?
ANSWER : That is a major hardware fault, I have seen this numerous times with these H2O mop’s… They seem to either work perfectly for a long while or have problems right off the bat. You definitely want to send this unit back and either get a refund or at least have them send you a new one..
.Thanks.Tim

I had a real heck of a time with the bag installation, because after the pop i zipped it up and started to use it and then the bag of the vac, not the replaceable bag fell off and i kept putting it back on but it kept falling off and when i looked inside the bag to reattach it to the vac cleaner i noticed that the dust was all inside. i haven’t even used it that much as i keep it to do the upstairs bedroom only. i love that it is so lightweight and easy to use and i hope that someone can co
ANSWER : Mary, I have some wonderful news for you and your Oreck XL2600 Vacuum, I called 1 800 989 3535 customer service and inquired about your bag attach problem, it seems to be a docking station problem that “may” be warranteed, however if it is missing then it is assumed not a manufacturers defect and therefore must be purchased, however they assured me the price is reasonable and inexpensive.
.Please call the 1 800 # above with the model XL2600 upright and they will assist you in locating a repair store nearest yoou or you may go online to www.oreck.com and visit there store locator using your zip code, please dont try to glue…. I hope this works for you Mary, and please have a wonderful day!!!!