Hoover F7220900 SteamVac V2 Upright Vacuum\015 Hello, My name is Steve and I have a Hoover Steam Vac V2 Deep Cleaner. The Model # is F7220-900 I took it apart to fix it because after a long time of no use I found the brushes were not spinning ant longer. I found the drive gears to be frozen up within the turbine drive unit. My problem is, when I was taking it apart to fix it I noticed a small rubber o ring on my table and I cant tell by looking at the parts exactly where it goes. The manual I have and the on line manual do not show an exploded view of all the part breakdowns so I cant use that. I have called several repair places and they basically wont help and tell me I have to buy the turbine assembly. I am not sure if the o ring even goes in that assembly. I cleaned the steel shafts that the gears that are attached to them and cleaned inside the mating plastic housings where the shafts slide into and re-lubed them. That assembly works fine now. Can you help me by telling me where that o ring goes?\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
If the product is not making steam please check that there is water in the tank fitted at the top. If the product is not making steam please check that there is water in the tank fitted at the top. Pull the tank up and fill it up with water. Please do not add any cleaning solutions to the water in the tank.
Although Hoover of course recommend their own detergent, we are using a 50/50 mixture of white vinegar and water, with a few drops of essential oil (tea tree oil) in it to improve the fragrance. This has worked well for us and is very inexpensive.
There is condensation in the stand steamer`s hose To solve this, lift your stand steamer`s head to straighten the hose vertically and hold your steamer in an upright position: This will allow any condensation and steam to flow again. After this, your stand steamer should steam again.
Clean your steam cleaner with water and empty it. Pour some water and add laundry detergent to it. Mix it well. Power on it and use it similarly to the way you use vacuum cleaners.
Ultimately, running your vacuum over your carpets after a professional deep clean is great but remember to do it only after your carpet is completely dry. Vacuuming your carpet when it`s still damp could cause dirt to be transferred from your vacuum cleaner, so patience does pay off.
Constructed of durable polyethylene, this recovery tank is a direct replacement for the one that came with your Mytee extractor. It is where all of the dirty water is kept until you are done using your carpet cleaner.
KEY TAKEAWAYS: Bagged vacuum cleaners comprise six main parts, including angled fan blades, a porous bag, an exhaust port, an intake port, an electric motor, and a housing unit. Extra attachments include brush heads, vacuum hoses, and angular suction tools.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Had infamous extra part once I put my steam cleaner back together
ANSWER : Steve, The o-ring goes inside the turbine assembly on the metal shaft.
I HAVE A BISSELL PROHEAT CARPET CLEANER 7920 I DISSEMBLY IT TO CLEAN IT. I DON’T KNOW IF I PUT THE HOSES BACK IN THE RIGHT LOCATION BECAUSE AFTER I PUT IT BACK TOGETHER IT’S LEAKING WATER ALL OVER THE FLOOR BUT IT WILL RECOVER THE WATER FROM THE FLOOR AND THE SOLUTION WON’T SPARY OUT I THINK THE HOSES ARE NOT IN THEIR RIGHT LOCATION TO STOP THE FLOW WHEN IT’S NOT SUPPOSE TO BE COMING OUT CONSTANTLY HELP PLEASE IS THEIR A HOSE DIAGRAM FOR THE HOSES INSIDE THE CARPET CLEANER
No steam My SV1000 steam cleaner will not make steam. It heats up, but I think the small portholes where the steam comes out are clogged up. Are parts available to change the steam line?
ANSWER : I used the straw to prime the lines and 50/50 mix of vinager and water and it worked perfectly. I then mixed the water container with the same mix and ran it through the system. All works fine now.
I HAVE A BISSELL PROHEAT CARPET CLEANER I DISSEMBLY IT TO CLEAN IT. I DON’T KNOW IF I PUT THE HOSES BACK IN THE RIGHT LOCATION BECAUSE AFTER I PUT IT BACK TOGETHER IT’S LEAKING WATER ALL OVER THE FLOOR BUT IT WILL RECOVER THE WATER FROM THE FLOOR AND THE SOLUTION WON’T SPARY OUT I THINK THE HOSES ARE NOT IN THEIR RIGHT LOCATION TO STOP THE FLOW WHEN IT’S NOT SUPPOSE TO BE COMING OUT CONSTANTLY HELP PLEASE IS THEIR A HOSE DIAGRAM FOR THE HOSES INSIDE THE CARPET CLEANER
Parts replacement We have a Hoover Steam Vac that has a broken part #10 in your picture or Part # 37271035. Does this part cover the whole top section of the Vac? Is it hard to replace? Where can you get the best prices on Hoover parts? I have been on Hoovers website and they don’t even recognize this Steam Vac. which is hard to believe they don’t even recognize their own unit? Thanks Ray
ANSWER : This the hood or top cover. There some screws on the bottom as well as on the top, then it comes off.
While using my mop yesterday, it stopped letting steam come out. Tonight I plugged it up again and you could hear it trying to steam. I push the button in to release the square frame and it pushed out a burst of steam and pushed the head off. Put it back together and it still will not let steam out. No matter how much water is in it.
ANSWER : .Hi,
Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…
Euro-Pro Shark Steam Mop Problem
Here also is a link to get any of the Shark Manuals that you need.
heatman101.
.;.
.
.;.′;’;
Parts Hi I have the Eurkea steam cleaner model 2450 and was wondering how do you take the front part off where you can see the water sucking up from carpet so this can be cleaned. Also I think the spring in the part that holds the water has come off another part is this able to be fixed or can I just purchase a new water holding tank and if so where?
Thanks
Hoover steam vac- lost instructions. Where do you put the water and cleaner and how do you put back together?
ANSWER : Go to www.hoover.com for the instructions/owners manual
