Vacuums
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
If an alarm has occurred on a zone, the [MEM] button will illuminate. All zones where alarms occurred will be stored in memory. After disarming the system, press the [MEM] button to illuminate the buttons corresponding to the zones that were in alarm (see Zone Display on page 4).
Alarm Trouble Codes
To silence the keypad on trouble codes, press the [TRBL] key, and then the [CLEAR] key.
Does your Paradox Alarm have a red TBL light displayed? When an alarm trouble condition occurs, the [TBL] button will illuminate on the alarm LED keypads or “Trouble” will appear on the LCD keypad`s display. Push the [TBL] key to view the Trouble Display.
1. Press & hold the corresponding zone key for 3 seconds (Accept beep = Chime enabled, Fail beep = Chime disabled). To send a silent or audible alarm to your Security Company, press and hold one of the button combinations listed for 3 seconds. When a trouble condition occurs, the [TBL] key will illuminate.
A panic button works by sending an instant alarm straight to management or security personnel the moment the alert button is triggered. This emergency alert is sent over a Bluetooth or wi-fi network.
Available in 433MHz or 868Mhz (868Mhz RF not yet certified)
Paradox DNS Site ID: The DNS SiteID is set by your installer. Panel user code: This is the same code you enter on your keypad to arm the system. Module password: The default password is “paradox”.
The Master Code is the primary code for the alarm system. In addition to arming and disarming the alarm system, the Master Code provides access to a user menu.
Open a web browser (e.g., Google Chrome). 2. In the address bar, enter http://www.paradoxmyhome.com/SiteID where “SiteID” is your Paradox SiteID (set by your installer).
The Master Code is the primary code for the alarm system. In addition to arming and disarming the alarm system, the Master Code provides access to a user menu.
If you press the status button (marked with an i on your alarm panel) the panel will speak to you and let you know if your alarm is in the Stay Mode, Disarmed or if you have fully armed you alarm to the Away Mode.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Venturer iP873 clock radio
Comes with 2 alarms, how do i turn off the second alarm when i only need 1 alarm?
And on days i do not need the first alarm, how do i turn off both alarms all together?
Comes with 2 alarms, how do i turn off the second alarm when i only need 1 alarm?
And on days i do not need the first alarm, how do i turn off both alarms all together?
ANSWER : Post in correct area for help. 🙂
Read Full Q/A … : Vacuums
I need a manual for the Lifesaver Smoke Alarm – Model 1275, SN 1922968. I have 5 smoke alarms in my house and they have gone off every hour, all night long. The alarm itself gives certain information, but says ‘refer to manual’ for info other than is printed on the alarm.
Can you help?
ANSWER : Here you are:
http://www.kidde.com/utcfs/ws-384/Assets/1275H_440381en.pdf
Best regards, –W/D–
Read Full Q/A … : Vacuums
The one of the controllers for the electric blanket keeps flashing an “e”. The other controller is fine. We switched controllers and the same thing happened. We have unplugged the blanket for several minutes and turned off the controller for several minutes. It always goes back to displaying the “e”. It is a warmspun blanket and I cannot find any information on the company so that I can contact them to see about the 5 year warranty.
ANSWER : I did some searching– and I came up with this Linkedin page– seems to have some information– Let me know if it helped-
http://www.linkedin.com/companies/jla-home
Mack B
Read Full Q/A … : Vacuums
Ok so, here’s my problem. I have a nintendo DSi and I’m trying to connect it to the internet. I’ve been searching on google on how to connect it. They said that i need wi-fi and some say I don’t need wi-fi and some are saying i need a wirelerr router and some are saying that I don’t need a wireless router. I’m wondering how I should connect my DSi without a wireless router and without wi-fi.
ANSWER : Http://www.nintendodsi.com/meet-dsi-xl.jsp
I think you are trying to do the impossible but try this site.
Read Full Q/A … : Vacuums
I need assembly instructions for a GardenLine hose reel trolley as the instructions that came with it are so vague and do not tell you where all the parts go.
ANSWER : Check for GardenLine parts here
Gardenline Einhell Genuine Spares and Accessories Buy Online
Read Full Q/A … : Vacuums
Need instructions for use of dirt devil spot scrubber; have borrowed one to use to get some serious spots off of carpet; no instructions with it; need to know how to fill the container and how much solution to use for cleaning.
ANSWER : To have a manual mailed to you at no charge, please contact our customer service department at 1-800-321-1134.
Read Full Q/A … : Vacuums
NEED INSTRUCTIONS I NEED INSTRUCTIONS ON HOW TO USE IT-THANKS MELISSA
ANSWER : You might try thehooverstore.com, see if they can get you one. At hoover.com, there is a download section for manuals, but your doesn’t come up as being available.
Read Full Q/A … : Vacuums
MY VACUUM ISN’T PULLING AS STRONG AS IT USED TO SO I THINK IT NEEDS A NEW BELT. I CAN’T FIND THE MANUEL ON IT SO I NEED SOME INSTRUCTIONS ON HOW TO CHANGE THE BELT. I DON’T WANT TO BREAK MY VAC. CAN SOME ONE PLEASE INSTRUCT ME ON HOW I SHOULD CHANGE THE BELT PLEASE. TYPE VAC: EUREKA THE BOSS WHIRLWIND LITE CYCLONIC POWER CANISTER TYPE VAC. THE HANDLE IS DETACHABLE TO CLEAN IN THE CORNER WITH A SMALL EXTENSION.
ANSWER : You can get Eureka replacement belts here:
Read Full Q/A … : Vacuums
