ot find model numnber anywhere. any advive?
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Buy a Riccar vacuum cleaner and keep your vacuum for 10, 15 or 20+ years. Some models are Built in America and that means that the parts to keep the vacuum working are in America.
The most popular and well-known sewing machine brands are Singer, Brother, Juki, and Janome. These brands make machines in the most popular pricing categories for home sewers.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
We have brought the Bernina in, set it up, oiled it as specified in the manual, with the original sewing machine oil. We have correctly threaded the machine and the bobbin thread is up.
When we press on the pedal to sew, the machine gets electricity and buzzes
From what you describe there can be only 2 causes…Either the machine is still stuck ..and the motor buzzes cause it can not spin it ..and in this case it needs to be oiled more..and be spun by hand until it moves well and free…and after that it will work ..or during the storage ..from condense or so ..the motor is stuck ..and needs to be checked…In this second case ..it probably need to be oiled too (the motor ) ..and the coils changed..
Have a nice day ..!
The machine probably requires about 2 amps or less under normal operation.
Being a 3.0 amp slow blow fuse, it will withstand short bursts of extra current when your machine gets temporarily overloaded.
Just make sure the machine is properly lubricated and runs freely. The fuse will definitely blow if your machine should get jammed or something like that.
I think I know where I can score some. Cost of postage only. 🙂
Email me if you like.
Subject: T3.5/250v glass fuse
1st: Sewed one inch OK; moved fabric and it stopped sewing, motor made thudding noise. When push-button (NOT pedal) is used, gives error E6,
consistent with motor noise.
2d: In order to check threading had to manually PULL bobbin case toward me or it was UNDER needle plate. Cleaned a fair amount of dust out. Reinstalled bobbin, etc., per manual, rethreaded.
3rd: Will sew 2-3 stitches, then packs up again just like in 1st instance above. Have st
Sorry about the catagory…but you do not have sewing machine on list.
.I have this machine. I use it for my heavy sewing, as it will go through anything. I would be happy to copy the manual and send it to you for copy costs. Just let me know. I would love to know what knowledge you have gained about this machine. It does not appear to be an easy machine to find info on, may not have produced a lot? I had no idea it was not a European produced machine.
this was passed down to me. and a manual would help in so many ways. even if it was sent in a
Disassemble your bobbin case which is realy quite easy, clean.thoroughly with a brush and air, paying particular attention to any.rust that may have formed, and any thread that may have weazeled it’s.way into small but very incremental areas of your case.
Make sure your needle is not in backwards.The rounded side should be on the outside
. If threading is correct and your tension is properly adjusted , then check the hook for scratches. If you have ever hit the hook with a needle, it will be scarred and will catch the thread every time the upper thread passes around the bobbin case. the hook is the sharp point on the shuttle that holds the bobbin case. If it is scratched, polish it smooth with VERY fine sand paper
Make sure that your thread arm that rises and falls, constantly having tension running through it and that it is in fact staying in place.
Alternate between the metal and plastic bobbins – sometimes the plastic bobbins tend to chip