Hoover Steam Vac Dual V w/ SpinScrub Vacuum\015 I can’t get any water or cleaner to release when I use the trigger. I tried to use the hose and the upholstery cleaner and the water would not release as well. I think that the hose is clogged, but don’t want to take it to a dealer to get it unclogged. Is there any way I can unclog it myself??\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
To release the wand on the Hoover® REACT™ Powered Reach™ Plus press the Powered Reach™ Mode button on the top of the canister. This will allow you to remove the canister and access the wand release. The wand release button is located on the spine of the vacuum directly behind the dirt cup.
Push a broomstick through the hose to force any large clogs out. Take the end of the broomstick and feed it through the hose. Push the stick in slowly so you don`t accidentally break or puncture the hose. If there is a large clog in your hose, the broomstick will force it out from the other end.
Push a broomstick through the hose to force any large clogs out. Take the end of the broomstick and feed it through the hose. Push the stick in slowly so you don`t accidentally break or puncture the hose. If there is a large clog in your hose, the broomstick will force it out from the other end.
Push a broomstick through the hose to force any large clogs out. Take the end of the broomstick and feed it through the hose. Push the stick in slowly so you don`t accidentally break or puncture the hose. If there is a large clog in your hose, the broomstick will force it out from the other end.
Push a broomstick through the hose to force any large clogs out. Take the end of the broomstick and feed it through the hose. Push the stick in slowly so you don`t accidentally break or puncture the hose. If there is a large clog in your hose, the broomstick will force it out from the other end.
The suction nozzle is one size larger than the discharge nozzle.
Shop vac, and similar brands, have one hole for intake, ie to vacuum with, an the other hole is the blower output, which can sorta be used to blow stuff around. When you vacuum you pull in air , it has to go somewhere so it comes out the second hole.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Hoover SteamVac Model F6056-900 SteamVac/SpinScrub. Indicator light and high pitch suction noise indicates that dirty water tank is full. However, water level indicator (yellow bobbing plastic thing) is at the bottom of the tank and there is no water in the tank. Have check all the hoses for clogs, none found. Checked water port from motor area to receptacle tank for clogs, none found. Fixed broken hose to upholstery wand with duck tape, (wire not broken, just cracked plastic hose). The onl
ANSWER : There are 2 filters, make sure they are clean, one is on the tank lid, the other is from the bottom, it is red, pull it out and clean it. If yours has a foam filter on the tank lid covering the yellow ball, make sure there is at least a 1/4 in. gap from the top. Also make sure that the lid in on and secured tightly.
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
Hose that releases the water and cleaner on my Hoover is clogged
ANSWER : Your right the hose is clogged.. Use a portable vacuum to blow the dirt inside the hose.
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
I HAVE A BISSELL PROHEAT CARPET CLEANER 7920 I DISSEMBLY IT TO CLEAN IT. I DON’T KNOW IF I PUT THE HOSES BACK IN THE RIGHT LOCATION BECAUSE AFTER I PUT IT BACK TOGETHER IT’S LEAKING WATER ALL OVER THE FLOOR BUT IT WILL RECOVER THE WATER FROM THE FLOOR AND THE SOLUTION WON’T SPARY OUT I THINK THE HOSES ARE NOT IN THEIR RIGHT LOCATION TO STOP THE FLOW WHEN IT’S NOT SUPPOSE TO BE COMING OUT CONSTANTLY HELP PLEASE IS THEIR A HOSE DIAGRAM FOR THE HOSES INSIDE THE CARPET CLEANER
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101 .
.dfjddj
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
The Hoover Steamvac Widepath will NOT pick up water. The dispenser with cleaner DOES have water. The TANK that would receive the dirty water is NOT full. All tanks are on properly and the machine will still not pick up the used water. I found a tear in the interior hose leading to the receiving tank and repaired throughly with electrical tape. Still will not pick up the water. Any suggestions?
ANSWER : Sounds like a clogged air path (no vacuum action) from the floor pick-up to the collection tank. Take the tanks off and deal with the vacuum problem alone. The collection tank should have a air exit vent–is it clear? Check the interior hose that you repaired–is it clogged? Remove the bottom plate and inspect the air path from it. Because this machine deals with water, clogs can become like concrete! Hope this helps!
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet
ANSWER : Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn’t blocked as well.
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
I HAVE A BISSELL PROHEAT CARPET CLEANER I DISSEMBLY IT TO CLEAN IT. I DON’T KNOW IF I PUT THE HOSES BACK IN THE RIGHT LOCATION BECAUSE AFTER I PUT IT BACK TOGETHER IT’S LEAKING WATER ALL OVER THE FLOOR BUT IT WILL RECOVER THE WATER FROM THE FLOOR AND THE SOLUTION WON’T SPARY OUT I THINK THE HOSES ARE NOT IN THEIR RIGHT LOCATION TO STOP THE FLOW WHEN IT’S NOT SUPPOSE TO BE COMING OUT CONSTANTLY HELP PLEASE IS THEIR A HOSE DIAGRAM FOR THE HOSES INSIDE THE CARPET CLEANER
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101 .
.dygj
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
I have a bissell quickwash 1950-e. I bought it Jan. 2006, and have only used it 8-10 times, I live in a very hard water area, so I though if I put some vinegar in with the cleaning solution it would get rid of any hard water deposits, unfortunatly the solution went lumpy in the tank and stoped spraying out water, I have opened it, hose clean, sprayer not blocked, x at bottom of water container when depresed water trickles out, component that opens the x when water container placed, also ran wate
ANSWER : Hard to say what is causing your problem, replacing the cap and insert on the water tank may help, part #2041111, even tho it may trickle out water when depressed, they can still be bad. The other thing would be the rod not relesing the water like it should. The big draw back to this model is Bissell has obsoleted all of its parts and most are no longer available. Might be wiser to buy new.
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
My Hoover Steamvac Widepath will NOT pickup the water after dispensing. I checked the hose inside the cleaner, there was a cut in the hose so I put electrical tape and completely sealed the cut. Still will NOT pick up water. I can’t find any other problems with the hose. Any suggestions?
ANSWER : Hello
Here are some suggestions you might want to follow to solve this problem
First double check if there are other cuts in the hose or any sort of blockage or clogging in the hose and be sure to remove any form of debris
If the problem persists, empty the recovery tank of the Hoover SteamVac because some models shut off automatically whenever the tank is full,and this might just be what is causing the problem
If this doesn’t work as well then the hose might be worn out and you just have to change it to get your SteamVac working again.
Goodluck
Read Full Q/A … : Hoover Steam Vac Dual V w/ SpinScrub Vacuum
