Dirt Devil Reaction Twin Cyclone Upright Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

I would buy this product again.

I use this filter in my Dirt Devil stick vacuum and love that it is washable.

I would buy this product again.

I use this filter in my Dirt Devil stick vacuum and love that it is washable.

I would buy this product again.

I use this filter in my Dirt Devil stick vacuum and love that it is washable.

The Dirt Devil® Vibe™ 3-in-1 Stick Vacuum is designed with you in mind. The lightweight design is easily portable for all your small messes. With on/off brushroll you can conveniently move from carpets to hard floors at the touch of a button.
Replace filter every 3 to 6 months.
To clean a foam filter, submerge it in water, squeeze it to allow the dirt to escape the foam, and allow it to air dry before putting it back in your vacuum. If you want the room to smell really nice next time you`re vacuuming, add a few drops of essential oil to the foam.
No it`s not recommended to suck up water.
Clean the Canister: Empty the canister, then wipe the interior down with a microfiber cloth. The best-case scenario is washing the entire canister in warm soapy water. It will remove all remaining dirt, dust, grime, and hair most efficiently.
Dump the Dust

If your vacuum has a disposable bag, remove and discard it. For vacuums that use a plastic canister, remove the bin and dump the contents in the trash.

If the brushroll is sticking, it will cause too much friction and put too much strain on the belt. Remove the brushroll and clean all hair, string, and lint from the brushroll bearings. If the vacuum cleaner brush still doesn`t spin after you clean the brushroll, consider replacing the brushroll.
Wind speeds in larger dust devils can reach 60 mph or greater. Even though they are generally smaller than tornadoes, dust devils can still be destructive as they lift dust and other debris into the air. Small structures can be damaged, and even destroyed, if in the path of a strong dust devil.
Rinse, Reuse, Repeat: give your filter a good tap against a trashcan to quickly remove dirt or a quick rinse to remove more stubborn dirt. Let filter dry for at least 24 hours after rinsing before next use.
I would buy this product again.

I use this filter in my Dirt Devil stick vacuum and love that it is washable.

Why is the vacuum is blowing dusty air out of the back? Simple: the bag or canister is full and the vacuum has nowhere to store the dust it is collecting. Empty the canister or bag. If that doesn`t fix it, the vacuum filter needs to be cleaned or changed.
What`s happening with your vacuum cleaner is that a clog has built up and debris being agitated by the roller is spitting out or stirring up dust without sucking it in.
We also found the PowerSpeed to be a bit on the louder side, measuring in at 76 dBa.
Eureka vacuum cleaners have been known for their excellent service and reliability in cleaning floors, carpets, rugs, upholstery and drapery for more than 100 years.
When the hotter part of the ground heats up the air above it, becoming hotter than the air around it, it creates an unstable environment causing the surface air to rise and create a vertical column of warm air forming a dust devil.
dust devil, also called sand devil, small, brief whirlwind occurring most frequently in the early afternoon when a land surface is heating rapidly.
[Built to last] The 3 under counter water filters have a lifespan of 6 months, 8-12 months, and 12-18 months, respectively. [1] The 3-stage under counter drinking water filter`s long lifespan reduces the burden of purchasing filters every now and then.
Filters in residential settings should be changed every 6 to 12 months. Reverse osmosis, membranes, and additional alkalisers only need to be changed ever 2 years or 4 years, respectively.
Check the power unit reset button located above the power cord. Pressing the button should restore operation. NOTE: The reset button is located on the upper left-hand side of the unit where the low voltage wires connect to the unit.
I would buy this product again.

I use this filter in my Dirt Devil stick vacuum and love that it is washable.

IMPORTANT: Don`t over fill the dirt bin to avoid blocking the air flow through the handheld. Press the dirt bin release button to remove dirt bin. Press the dirt bin release button to remove the dirt bin. Pull the tabs on the filter frame to remove the separator and filter from the dirt bin.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Our Bissell Cleanview II 3576M does a great job except that the filter cup below the dirt cup gets full very fast and the dirt cup barely has anything in it. To clean the whole house, I have to empty the dirt cup and clean the filter several times. It didn’t use to work this way. It seems like something is missing, a gasket or seal maybe? I don’t think dirt, hair and debris should be going straight to the lower cup and bypassing the upper. I looked at the user guide but can’t see why it’s happen
ANSWER : Contact Bissell Direct for a parts diagram and support at
.
.http://uk.bissell.com/EmailUs.aspx
.

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

How do i clean the two little top parts above the bottom empty dirt cup
ANSWER : Hi there,

inside the dirt chamber you should be able to twist and remove both of the silver what look like arrowheads and you should be able to get up inside the top with a water hose to clean out the upper area there. Allow for the unit to dry before you put it back together.

Good luck.
Mark

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

I broke the handle part of the shark steamer #53101. I don’t have the book to try to tell you the parts I need. Can you send me a picture or a copy of the steamer. It is purple. The above number may not be the correct one. It is broken in the center part. It has a little small circular piece that joins the two pieces which are broken. The beginning of the handle at the bottom of the steamer and the next session which has the steam release. The top of the handle is okay . It the middle and bottom
ANSWER : Hi,
Ann there are very few parts for these…

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

We are unable to find a replacement part that the filter attaches to in the dirt cup on our Eureka Boss Pro Model 411. This part seals the top of the dirt cup and holds the filter in place. What is the part name or model number for the replacement?
ANSWER : I just called Eureka (1-800-282-2886) and asked for the dust cover lid. It was part number 61538-1. They said they could ship it to me or I could call one of the authorized service centers nearby to see if they had one. I wasn’t in a hurry and the total to ship it to me was just under $10.

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

Hi,
There is a high pitched whirring sound coming from lower part of the vacuum. When I tilt it toward me (while standing in the normal vacuuming stance) the sound sometimes lessens for a minute or so. I have tried the following things:
-cleaned the two sponge filters
-emptied the dirt receptacle
-removed the roller and cleaned it
-cleaned the brushes
-the belt is not ragged and does not seem floppy
-checked all of the airways for clogs (including removing the wheel base)
Can you help?
ANSWER : Your looking for some dirt stuck in some thing you didn’t check yet. with the roller out and the belt out of the way run it to see if it still makes the noise. if it does then you looking at the impeller or the motor bearing themselfs those bearings can be full of dirt or worn out If its running smooth with the belt off then the rooler bearings are next they may only squeel with the belt load on them but install it with the belt off and see if it turns smoothly, ( it should twirl with your finger ) if it turns hard keep cleaning and or replace the bearings, Then run it again to make sure it’s not making the noise hten take it apart again and put the belt on and see if its fixed, It’s possible to put the belt on backwards the brush should be turning as to pull the machine forward on the floor.

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

I’ve cleaned a few areas and now the blue nozzle part with the dirt needs to be emptied. I do not have an instruction manual and can’t figure out how to open or detach the blue nozzle part to empty it & clean it out.
ANSWER : Release the handle under by the front wheels. It will then pull out. Once you pull it out,on the frame there is a diagram showing out it comes apart.

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

Hoover Mach 3 (Fusion): Dirt Will not enter dirt cup
ANSWER : There is a filter in the top over where the dirt canister clips in, and one under the dirt cannister by the motor. Sometimes removing and cleaning will help if you have not tried it already.

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

Parts replacement We have a Hoover Steam Vac that has a broken part #10 in your picture or Part # 37271035. Does this part cover the whole top section of the Vac? Is it hard to replace? Where can you get the best prices on Hoover parts? I have been on Hoovers website and they don’t even recognize this Steam Vac. which is hard to believe they don’t even recognize their own unit? Thanks Ray
ANSWER : This the hood or top cover. There some screws on the bottom as well as on the top, then it comes off.

Read Full Q/A … : Dirt Devil Reaction Twin Cyclone Upright Vacuum

Hi, my name is Mea Archer, owner of the vacuum cleaner blog, the niche website that I have developed to provide the most up-to-date news, reviews and the latest advice and information for all things vacuum cleaner related.