Miele S514 Solaris Electro Plus Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Miele offers three different styles of power heads. The models differ in the functions they have and the cleaning width. The available features are automatic 5 height adjustment, headlight and automatic shut off for brush roll protection.
There are three main causes for your Miele to not power on: The power switch has failed. The cord reel is damaged. Your motor has gone bad.
For a cordless miele stick vacuum cleaner, a non-functioning hand control may be caused by an incorrectly fitted battery. Check that the battery is slotted into the battery compartment correctly and try the vacuum. If it doesn`t work, you may need to change to new batteries.
Power – All Miele canister and upright vacuums feature a powerful 1200 Watt motor that provides enormous suction. The Miele H1 Swing features a slightly smaller motor that comes in at 1000 Watts. Air Flow – When it comes to measuring a vacuum cleaner`s cleaning ability, air flow is more important than power.
The prices for their equipment are high, and it`s not hard to see why. Nearly all of their manufacturing is in Germany, and every component is produced directly by Miele in one of its 12 factories.
Miele (/ˈmiːlə/ MEE-EH-lə; German: [ˈmiːlə]) is a German manufacturer of high-end domestic appliances and commercial equipment, headquartered in Gütersloh, Ostwestfalen-Lippe. The company was founded in 1899 by Carl Miele and Reinhard Zinkann, and has always been a family-owned and family-run company.
If your roller is not spinning, the first step is to remove the roller and free any debris. Refer to your model`s user manual on how to remove the roller from your vacuum head. Debris can also be left on the vacuum head it is important to also clean this area including the sides where the roller brush connects.
If the grease or active charcoal filter of your ventilation hood(s) is saturated, the red LED indicator will light up. Your filter should then be cleaned or replaced as soon as possible.
Loose connections will cause your vacuum cleaner to lose suction. Make sure that the dust container, the hose, the tube and the brush are all attached properly. If the problem continues, your vacuum cleaner might have a technical problem. If you suspect this to be the case, contact an authorised service agent.
The HEPA AirClean canister vacuum filter lasts approximately one year, and features a built‐in TimeStrip filter replacement indicator to take the hassle out of remembering.
Bosch and Miele offer similar cutting-edge dishwashing technologies, but Bosch provides a more affordable solution. Both brands promise a decade or more years of reliable performance with sensor wash technology, flexible loading options, and high-quality materials for long-term use.
Miele. Founded in 1899, Miele is one of the most popular high-end appliance manufacturers in their home country of Germany and internationally.
Established in 1996 as a joint venture with Melitta, the Dongguan plant has been fully owned by the Miele Group since 2009. Currently Miele produces the Swing H1, Compact C1, Compact C2 and Complete C2 vacuum cleaners here.
Are all Miele Vacuums Made in Germany? Miele vacuums are made at their Bielefeld plant in Germany, the second largest and second oldest factory of the Miele group`s 11 manufacturing sites in Europe. Motors for the Miele merchandise range are supplied and made from their plant 230km away in Euskirchen.
With 11 employees, 4 lathes and a drilling machine, Miele and Zinkann launched their first cream separators and butter machines in 1899 in Herzebrock, Germany. Their guiding principle, “Immer Besser” – which translates as “Forever Better”, still shapes the company today.
Why is the vacuum is blowing dusty air out of the back? Simple: the bag or canister is full and the vacuum has nowhere to store the dust it is collecting. Empty the canister or bag. If that doesn`t fix it, the vacuum filter needs to be cleaned or changed.
One of the easiest ways to increase vacuum cleaner suction is to empty the dust bag or container. Dust containers need to have enough space for airflow, otherwise, they could get clogged and have less suction power. Regularly check your dust compartment and empty or change it when it`s already 70-80% full.
Vacuum means the absence of all matter including air. As there is no air in the vacuum, air pressure will be zero.
The Miele Classic C1 Delphi is an all-electric canister vacuum that features the Miele SEB217-3 Electric Power Head; perfect for pile carpeting of all heights. While this vacuum does not come with a separate floor brush, you can easily turn the brushroll off for cleaning bare floor surfaces.
Miele Complete C3 Cat and Dog Canister HEPA Canister Vacuum Cleaner with SEB228 Powerhead Bundle – Includes Performance Pack 16 Type GN AirClean Genuine FilterBags + Genuine AH50 HEPA Filter.
Miele Powerbrushes

A dedicated motor operates a rotating brush (aka: beater bar) to turn carpet fibers over and deep clean the carpeting. The Miele turbobrush is an all in one solution for homes with wall-to-wall carpet or heavy foot traffic on your carpeted areas.

Miele Complete C3 Cat and Dog Canister HEPA Canister Vacuum Cleaner with SEB228 Powerhead Bundle – Includes Performance Pack 16 Type GN AirClean Genuine FilterBags + Genuine AH50 HEPA Filter.
Miele Powerbrushes

A dedicated motor operates a rotating brush (aka: beater bar) to turn carpet fibers over and deep clean the carpeting. The Miele turbobrush is an all in one solution for homes with wall-to-wall carpet or heavy foot traffic on your carpeted areas.

If you need to vacuum bare floors only, you do not need a powerhead or a power nozzle as it`s called. If you will be using it on carpet, be sure that you purchase one with a power nozzle, which is a motorized beater.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci

Infinity Vaccum by Shark, model number NV31COS, will not start. The vacuum was running just fine until it grabbed the edge of a curtain. Turned it off to release the suction. Turned it back on and was working fine. About a minute later the vacuum was making an odd noise. Every 2 seconds or so it would “heave” (lack of a better word) then go away, then come back and so on. Turned the vacuum off and checked for blockage, none that could be seen or felt, and now the vacuum won’t turn. Any suggestio
ANSWER : Carpet brush won’t turn when vac on

I have a Eureka Boss Power Plus and the beater bar is rolling, the belt is turning, but after vacuuming up around the litter box (not a lot of litter), when I turn the vacuum off, the litter, or even household dirt, falls out. When I hold the vacuum back to turn it off so that it doesn’t fall on the floor, it’s sitting in the cubby where the wheels are. The bag is empty, the hose is not plugged, the hose is securely fitted on both ends of the unit. This vacuum was purchased in July and is being
ANSWER : Even though the brush is spinning, you probably need to replace the belt2_bing.gif because it is stretched. It is probably slipping on the beater bar. This is normal and you shouldn’t be alarmed. There is nothing wrong with your vacuum. 🙂

Jim

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.

Miele Solaris Electro Plus will not turn on
ANSWER : I was using my Miele Solaris Turbo plus to **** the air off the Space Bag. Now I have the red indicator on and the vacuum cleaner won’t turn on. Please help. This is my favorite vacuum cleaner!

I have a Kenmore canister vacuum – model 25614506. Some time ago, I was not able to turn the vacuum off with the on/off switch, but could still use the vacuum. Turned if off/on by pulling the plug. The other day when I went to plug it in, I heard a pop. Now the sweeper runs but the vacuum cleaner does not **** – no air flow. What could be the problem. The cleaner is only 4 years old.
ANSWER : The motor has an inline fuse