Shark Cordless Stikvac Vacuum Cleaner sv800

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Sometimes the battery may have gotten dirty or slipped away from its contacts inside the Shark robot vacuum. Cleaning and repositioning it may fix your problem. But if it`s an old battery or there are clear signs of damage, you should order a replacement battery that matches your model.
Replacement batteries are available for purchase at sharkclean.com/batteries.
With the Shark cordless hoovers with dual batteries, you can achieve a runtime of around 100 minutes. But one or the other model with a single battery also has a runtime of up to 50 minutes. Generally speaking, the battery life of Shark cordless vacuum cleaners is around 40 minutes on average.
Replacement batteries are available for purchase at sharkclean.com/batteries.
Replacement batteries are available for purchase at sharkclean.com/batteries.
If you checked your brush roll, floor setting, and belt but your brush roll is still not spinning, that means you probably need a Shark micro switch replacement. This small switch tells the vacuums brush when to start spinning.
With the Shark cordless hoovers with dual batteries, you can achieve a runtime of around 100 minutes. But one or the other model with a single battery also has a runtime of up to 50 minutes. Generally speaking, the battery life of Shark cordless vacuum cleaners is around 40 minutes on average.
With the Shark cordless hoovers with dual batteries, you can achieve a runtime of around 100 minutes. But one or the other model with a single battery also has a runtime of up to 50 minutes. Generally speaking, the battery life of Shark cordless vacuum cleaners is around 40 minutes on average.
A removable, rechargeable lithium-ion battery for your Shark® Rocket® Pet Pro Cordless Stick Vacuum.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Can you take the Swivel Sweeper battery pack apart to replace the batteries with new rechargeable batteries? Batteries look like AA or AAA, but it appears that the battery pack is sealed. Is there any way to get it apart:?
ANSWER : Yes you can if you have a way to cut through the plastic outer case,(I used a Dremel rotary tool). Inside you will find six double A Ni-mh batteries. I found eight of these for sale on ebay for around ten bucks,then all you do is solder some wire to the batteries like the original battery pack and tape up the case and charge.

HOW DO WE TAKE apart THE BATTERY APART ON THE Shark cordless stikVac

I purchased a brand new P113 Ryobi charger about 2 years ago. It has never worked. If I put a P104 battery in for a charge, it looks like it works correctly. I push the battery tester on the battery itself, and it says full charge, but when I go to use the bateery, it dies right away. I have tried three new P104 batteries. The batteries charge on my charger at work with no problem. The funny thing is, I don't need a battery in the charger and the charger does the same thing, It runs the test
ANSWER : If you have your receipt, check with Ryobi to see if it is still under warranty. It comes with either a 2 or 3 year warranty, depending on when it was purchased. If it is still covered, get it replaced/repaired. If it is not, buy the P117 charger. $30 at Home Depot. It has a 90 day satisfaction guarantee. If it charges your batteries properly, you’re good. If not, bring it back if you don’t like/want it. My P113 won’t get out of test mode now, or charge Lithium batteries anymore. So I bought the P117 yesterday. Works great, and it’s a lot cheaper than new batteries! And it has a 3 year warranty.

Battery charge I just purchased a new battery pack insert for my Roomba, Replacement
was a breeze and it now works great. My question is; The last battery I
bought ( not from you) was a full cased roomba battery pack that didn’t
last a year. Roomba says leave the r Roomba charging all the time so
it’s ready when you need it, and that’s nice but I feel that leaving it
charging like that it will kill the battery faster as it is always warm
to the touch. These battery’s should last at least 5
ANSWER : Dave you are correct. You should never over-charge anything like a Roomba, Cel Phone, etc. That will kill a bettery very quickly.

I have iRobot Roomba 4210 and I have a problem with charge battery. The battery is new. When I charging a battery in other iRobot Roomba the battery was full charged. When I charging in my iRobot Roomba the battery was empty. My fast charger is OK.
ANSWER : The charging circuit on the main board is fried. This is a common issue. You need some good electronic repair skills, and equipment, to replace the problem components

Battery temperature sensor.
ANSWER : 1. Battery configuration is incredibly important and must be matched to the requirements of the device.
.
.2. Battery charging is as much an art as a science. Just slapping any old power supply on a battery pack to charge it is essentially technical sue-ee-side.
.
.Yes, the car battery folks make it look easy; but many, many millions of dollars and development hours went into that simple-looking technology just for that reason: to make it look easy.
.
.You may have damaged the batteries and probably damaged the circuit board as well. There is a reason that companies spend millions in development. Unless you have a Master’s Degree in Electrical Engineering, you should stick to factory-designed and -authorised parts.

TAKE APART SHARK S3601
ANSWER : There are two screws under “SHARK” decal, and three under steam mode decal (button that controls three steam options)

Bissell Healthy Home Vacuum brush stopped working. The hose attachment works fine, just the brush on bottom. Without taking it completely apart, it shows no sign of blockage. Any suggestions? Or, will I have to take it apart?
ANSWER : You will have to remove the bottom plate to get at the brush. The drive belt either slipped off or broke, this will have to be replaced.