Rainbow E series Canister Wet/Dry Vacuum\015 Is there screws or someway to get the cannister off to change the cooling air filter on a rainbow e2 series vaccum wet/dry\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Air pulled into the Rainbow is cleansed through a swirling water bath and then is filtered through a HEPA neutralizer, returning fresh, water-washed air to your home.
How often do I need to change the HEPA filter? It is recommended that you have an Authorized Rainbow Service Center inspect your HEPA Neutralizer after two years of use. After five years of use, the HEPA Neutralizer should be replaced (by an Authorized Service Center) to ensure your Rainbow performs its best.
If you want to really bring out the rainbow, use a polarizing filter! Yes, a polarizing filter can make a huge difference in enhancing colors of the sky, the rainbow and other foreground / background elements.
If you follow these basic guidelines, expect your Rainbow to last some 20 to 30 years because it is a very robust machine.
It is the only vacuum that is a certified air purifier and is designed to run 24/7 on a lower speed to purify the air in the home. The unique difference is the water. All dirt and dust is trapped in a basin of water so that no debris can re-enter the home atmosphere.
If your filter is not changed in time, it will be clogged with micro-organisms like bacteria, viruses, and mold particles. It won`t be able to clean new ones and only capture them on the filter`s surface.
When you use a vacuum cleaner without a HEPA filter, these particles are stirred up and put back out into the air through your vacuum`s exhaust. Regular filters can`t remove these harmful particulates and this puts the people in your home at risk.
HEPA filters are also not designed to be washed. Washing a true HEPA filter can easily damage it so that it can no longer filter properly. Plus, the amount of particles washing it will remove will be low anyway.
Any fine dust remaining in the filter can usually be removed with a gentle rinse under a cold tap – hold the filter under the running water until the water runs clear. You shouldn`t need to use any detergent – just water.
But your vacuum is just like any other appliance in your home, it requires maintenance. If the filter isn`t clean, it can impact the performance of the vacuum. Dirty vacuum filters can restrict airflow so the suction won`t be as strong.
Let the filter dry completely — give it about 24 hours — before putting it back in the vacuum. Never dry the filter in the microwave or a clothes dryer.
Vacuuming can release and re-introduce pollutants back into your air, while washing the filters could potentially cause mold to grow if the filters are not dried fully. The only way to keep your filters fresh is to replace them regularly.
Yellow is the happiest color in the rainbow. This color of sunshine represents energy and warmth. It is often associated with happiness, clear thinking, and communication.
A red filter is the go-to for bold and dramatic effects. Not only will it give your photos a more intense feel, but using this type of color eliminates any haziness that might be present in those shots with mixed material buildings or foggy landscapes – giving you clarity where there was once misty atmosphere before.
Using The Power Of Water Instead Of Air

Rainbow vacuum cleaners provide a unique system of cleaning. Instead of using the power of air to gather dust, dirt, and grime into an attached bag, Rainbow vacuums take advantage of the capacity and might of water to satisfy cleaning needs.

The water is the fluid which traps every dust and dirt particles that come into the Rainbow, Running your Rainbow without water allows all these particles pass into the Rainbow internal parts, and also clogging your HEPA filter, which is designed to be a backup filter to work together with the water.
Immediately after using the Rainbow, remove the water basin and pour out the dirty water through the air intake opening.
How do I know if my HEPA filter is dirty? Open up the air purifier and remove the pre-filter. Your HEPA filter will have heavy clumps of dirt and dust and it`ll look black if it`s dirty. That`s an indication that your filter needs cleaning or replacement.
Your filter should indicate somewhere on it whether it`s washable. If you aren`t sure, get rid of the old filter when its time is up and buy a new filter you know is reusable.
If you have dirty filters, you`ll notice a stale odor immediately when you turn on the vacuum and reduced suction as you work. For high traffic areas, the filter may need to be cleaned monthly. For most homes, vacuum filters should be cleaned at least every three months.
The RainJet tank is designed to use only Rainbow Clean Floorsolution and clean, cold tap water. To avoid damage to the RainJet, do not place any of the following into the water tank: Hot water or liquids • Commercially available cleaning liquids or compounds 7.
With a high and low speed, you can run your Rainbow 24/7 to clean the air without disturbing your home in the process. The low speed is quiet and unnoticeable when standing right… The Rainbow water filtration is something you must see to believe. Once dust and dirt get wet, they can`t go back into the air.
Using the machine with only one of those filters would dramatically reduce the efficiency of your air purifier and may result in abnormal air circulation noises, as the space left by the missing filter would allow part of your indoor air to circulate freely without being filtered.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I have a Z345 Electrolux cylinder vacuum cleaner, from the 1970s probably, but not used much. I have lost the guide. I forgot to change the bag before it was full. Smoke started to come out – smelling of burnt paper, not rubber. So switched off. It did not blow the fuse, and may be OK. I wish to inspect it. How do I open it up?

Alos I have an air filter and a motor filter for it. I have often changed the air filter on the top. How do I get at the motor filter, if there is one?

Than

ANSWER : Good day!

OK you have to is replaced the bag and that’s it.

And don’t forget to change the bag again to avoid that problem.

Thank you

Our problem with our Rainbow E Series is that it has sucked water up and blown it out through the lower part of the hepa filter, making the filter wet and dirty. This had happened before and the repair shop did not see any problems with the machine, so we replaced the filter and were very carful not to overfill the tank and to change the water often. Now it has happened again and ruined another filter. Do you know what could be causing this issue? Can the filter be cleaned or will a new one be
ANSWER :

Thank you for allowing.us to help, please respond with further questions and concerns
..

Spanish speaking.available for all problems
..

Before you leave.feedback, ensure that your concerns and problems are addressed completely with.me.
..

PLEASE do not forget to.award/PROVIDE “POSITIVE” FEEDBACK
.



.

Hello, thank you for sharing your problem with us, I would personally be happy to provide the most accurate and up to date information for you.
.



.

1. There is no reason to waste money on an EXPENSIVE replacement. While some people may like the fact that something that may be brand new may work better, this is not always the case.
.

2. You can easily set the filter out to try as long as there is NO WET ELECTRICAL COMPONENTS, if so, you will be facing electrical damage
.

3. Once you have performed a natural or sun dry on the old filter, ensure to check your unit for anything that may have caused the back clog.
.

4. Back clogs for your model are often times associated with a BUILD UP of dirt and HAIR. YOU may always use pressure air for example at a gas station to flush out the build up.
.

5. Other occasions, users accidently build the vac WRONG causing continual backup and water going where it is NOT suppose to go.
.

6. Please visit me again if your problem persists.
.



.

.


..

Thank you for allowing.us to help, please respond with further questions and concerns
..

Spanish speaking.available for all problems
..

Before you leave.feedback, ensure that your concerns and problems are addressed completely with.me.
..

PLEASE do not forget to.award/PROVIDE “POSITIVE” FEEDBACK

No vacuum My Floormate has plenty of air moving, but no vacuum at the nozzle. When I turn it on, the filter hops up to the black rubber “intake”, rather than staying in its spot. It seems to me that the intake should be in contact with the filter when the reservoir is installed. And I don’t understand why the intake isn’t closer to it, but it seems fixed there, almost an inch higher than the filter. When I remove the bottom reservoir and turn the h3000 on, I feel vacuum at the intake, and air
ANSWER : Someone must have lost the filter cover from the machine. It is a clear blue plastic cover that goes over the filter and has a hole that lines up with the motor intake. It is approx. 3 inches square and has an angular top to coincide with the motor intake. Look around the house for it or order a new cover.

HEPA Filter My vacuum came with a sponge over the filter and the directions said I could wash the filter. Do the directions mean to wash the black sponge or the actual filter? Is the sponge part of the filter or is it trash? Filter F27 Dirt Devil Purpose Cleaner for Pets Upright Bagless Vacuum Model #1LY2108-000
ANSWER : Http://geeksquad.fixya.com/ThreadView.aspx?prdid=618630&thid=730623
.HEPA Filter
.Posted by jenski66 on Jul 02, 2008
.My vacuum came with a sponge over the filter and the directions said I could wash the filter. Do the directions mean to wash the black sponge or the actual filter? Is the sponge part of the filter or is it trash?
Filter F27
Dirt Devil Purpose Cleaner for Pets
Upright Bagless Vacuum
Model #1LY2108-000

.
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Typically the top filter of which is the sponge is washable but the HEPA filter is not, it can be brushed off and vacuum off with another vacuum, but the best filtration is to replace the HEPA filter and to wash the sponge filter, if the sponge filter get to bad then replace the sponge filter as well. Or, you can check with your local vacuum cleaner dealer in your area or to contact the manufacturer’s website and or phone #. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

.http://royalvacuums.com/ Customer Service 1-800-321-1134
.Hours are: 8:00 AM to 7:00 PM (EST)
.Thanks, Don the Vac Man
Go Ahead. Use Us.

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Won’t start. My son was using the vacuum & Didn’t change the bag. The vacuum was making the full bag smell, but the light was’t on & it didn’t stop. I stopped him, changed the bag, checked the filter, closed the compartments & turned on the vacuum. Nothing happened. I checked to be sure that it was plugged in, that wasn’t the problem. I’ve let the vacuum “rest” for several days, It still won’t start. Any suggestions?
ANSWER : There is a reset button at the back of the powerhead. The user manual can be downloaded from the electrolux website, although I didn’t find it very useful. There was some info on how to change the powerhead drive belt.

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.