Dyson DC07 Bagless Upright Cyclonic Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Your Dyson DC07 has been rejuvenated with a new drive belt, allowing the brushroll to move freely while it cleaners your home.
From the top side of the motorized nozzle, grasp the hood near the handle socket and lift the hood forward to remove. Lift the brush roll from the pulley end of the base to remove the worn belt from the brush roll. Replace the new belt around the brush roll pulley and return the brush roll into the base.
The Dyson DC07 was introduced in 2001 with brand new Root Cyclone technology.
The DC07, released in 2001 was the first implementation of Root Cyclone technology into a cleaner.
There are two filters on a DC07, the first is the pre-motor filter, which are washable and is recommended by Dyson to be washed at least every 6 months. The pre motor filter also acts as a protection to the motor, trapping the smallest of dirt or debris from travelling to the motor.
Sucking up small items like rubber bands, beads, small Lego`s, etc. will wreak havoc on a vacuum belt. These items can also cause clogs in the inner vacuum hose.
The Dyson DC07 was introduced in 2001 with brand new Root Cyclone technology.
Dyson Belts, Fits: All Upright Vacuum Cleaner Models Using one Belt System, 3 Belts in Pack.
The Dyson DC07 was introduced in 2001 with brand new Root Cyclone technology.
We`ve now replaced the clutch mechanism on a Dyson. It`s worth noting the replacement procedure is the same as all other clutched versions of the DC07, DC14 and DC04 range with the exception of the Zorbster.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
How do you replace the band in a dyson dc07? – Dyson DC07 Bagless Upright Cyclonic Vacuum
ANSWER : DC07s have two belts – one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.
I suspect the belt you are to refering to is the one from the clutch to the brush bar. Unfortuenately the other belt is hidden under a plastic cover, so you cant see if it is okay or not without some dismantling. This cover is not easy to remove and requires a Torx driver to under the securing screws.
Have a look at www.dysonmedic.com, but unless you have access to such a tool, probably time to call Dyson or a Vacuum repairer.
I suspect the belt you are to refering to is the one from the clutch to the brush bar. Unfortuenately the other belt is hidden under a plastic cover, so you cant see if it is okay or not without some dismantling. This cover is not easy to remove and requires a Torx driver to under the securing screws.
Have a look at www.dysonmedic.com, but unless you have access to such a tool, probably time to call Dyson or a Vacuum repairer.
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
Replace power cord on Dyson DC07 – Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
ANSWER : The following link will take you to an article on how to change the motor on a DC07. Look at photos 4, 5 and 6 which shows how to disconnect the power cord.
.
.http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html
.
.Reassemble by reversing dissassembly instructions.
.
.http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html
.
.Reassemble by reversing dissassembly instructions.
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
How to put new cable on dyson dc07 upright – Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
ANSWER : Have a look at www.dysonmedic.com which has some excellent info on your machine.
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
Dyson vacuum turned off while vacuuming – Dyson DC07 Bagless Upright Cyclonic Vacuum
ANSWER : Hi There,
Assuming if you leave it for an hour and come back to it that it works again you have an airflow issue. This machine will cut out if the motor gets too hot. The likely causes are 1. Filters – take them out and give a good clean once dry you can try them again. 2. Blockage – Remove your u-bend and the blockage removal access check for an obstruction.3. Radix assembly is blocked. I will post a link to a YouTube video showing how to address this as it is a bit more difficult.
If your machine wont turn back on after a rest then your options are 1. Cord problem (most likely)2. Switch (unlikely)3. Motor
Assuming if you leave it for an hour and come back to it that it works again you have an airflow issue. This machine will cut out if the motor gets too hot. The likely causes are 1. Filters – take them out and give a good clean once dry you can try them again. 2. Blockage – Remove your u-bend and the blockage removal access check for an obstruction.3. Radix assembly is blocked. I will post a link to a YouTube video showing how to address this as it is a bit more difficult.
If your machine wont turn back on after a rest then your options are 1. Cord problem (most likely)2. Switch (unlikely)3. Motor
I have a video for just about all these problems on my youtube channel under VacuumSpot or VacuumSmart. If this is a step in the right direction please lay a thumbs up on the videos đŸ™‚
If you need parts for your dyson in Australia check out VacuumSpot
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
Replace belt for dyson upright – Dyson DC07 Bagless Upright Cyclonic Vacuum
ANSWER : DC07s have two belts – one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.
I suspect the belt
you are to refering to is the one from the clutch to the brush bar. Unfortuenately the other belt is hidden under a plastic cover, so you cant see if it is okay or not without some dismantling. This cover is not easy to remove and requires a Torx driver to under the securing screws.
Have a look at www.dysonmedic.com, but unless you have access to such a tool, probably time to call Dyson or a Vacuum repairer.
I suspect the belt
you are to refering to is the one from the clutch to the brush bar. Unfortuenately the other belt is hidden under a plastic cover, so you cant see if it is okay or not without some dismantling. This cover is not easy to remove and requires a Torx driver to under the securing screws.Have a look at www.dysonmedic.com, but unless you have access to such a tool, probably time to call Dyson or a Vacuum repairer.
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
Vacuum will not go completely upright – Dyson DC07 Bagless Upright Cyclonic Vacuum
ANSWER : This is something I’ve been seeing a lot lately, so don’t feel like you’re the only one with this problem.
here’s a link to a fix you can try that might solve your issue: Upright Fix
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
Why does my dyson DC07 not **** anymore ? – Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Hi its Darran at Dyson.
If you are experiencing a drop in performance, please follow the full diagnostics outlined in the support section on our website at www.dyson.com.
If this does not resolve the issue, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US).
Kind regards
Darran
Dyson Customer Service
Read Full Q/A … : Dyson DC07 Bagless Upright Cyclonic Vacuum
