ed the manual and it tells how long to charge it before you use it the first time, but not on subsequent charges.
Euro-Pro Shark Cordless Stick Vacuum SV775R Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

How do I know when my handheld vacuum is fully charged? When the handheld vacuum is charging, the red indicator light will fade in and out. When the vacuum is fully charged, the indicator light will turn green for 5 seconds, then shut off.
Charge the battery by plugging the charger into the port on the handheld vacuum. Use only Shark® chargers and charging docks. The battery should take approximately 3 hours to reach a full charge.
From the manual: • Top and bottom LED lights are flashing: Battery temperature is not optimal, so charging is temporarily paused. Leave battery plugged in and charging will resume soon.
It takes about 2.5 hours to fully charge the vacuum cleaner (from 0% to 100%). The battery temperature will increase after continuous use in MAX mode, which will also increase the charging time.
It can take up to four hours to fully charge your battery. Your battery has been designed to be left on charge. Your machine won`t operate or charge if the ambient temperature is below 5°C (41°F). This is designed to protect both the motor and battery.
Simply remove the battery and charge it at any plug socket in your home. You can also leave a spare battery on charge, so you always have one ready to go when the one in your vacuum runs out. It`s easy to purchase additional batteries directly from Shark.
Flashing headlights

These work lamps make it easier to see dirt and dust that hides away in the nooks and crannies of your home, but they also function as a secondary health indicator. If your Shark`s LED headlights are flashing, nine times out of 10 it means that your brush roll is clogged up.

Yes you can leave it in the charger.
With the Shark cordless hoovers with dual batteries, you can achieve a runtime of around 100 minutes. But one or the other model with a single battery also has a runtime of up to 50 minutes. Generally speaking, the battery life of Shark cordless vacuum cleaners is around 40 minutes on average.
It`s important to fully charge the machine before using it for the first time, and after every clean. This helps to improve the algorithm`s accuracy. The battery is designed to be left on charge permanently, and this will ensure that the vacuum is fully charged when it`s next used.
All cordless vacuums have limited battery life and need to be recharged. On average, you can expect a cordless vacuums` battery to last between 15 to 40 minutes, which is hopefully all it takes to clean your floors or furniture. Once the battery dies, expect to charge it anywhere from 2 to 16 hours.
The suction power is to be measured at the end of the tube of a complete vacuum cleaner (i.e. with tube, hose and filters – but without nozzle). Some manufacturers show the results from measurements made at the suction of the actual vacuum cleaner.
A common problem with power bank chargers is the charging cable, which may have been inserted into the charger improperly or carelessly. If the cable is inserted incorrectly, the power bank will not charge. Check to see if the cable is plugged in to the charger and the power bank is plugged into the wall.
An illuminated battery light could be due to a number of issues, including: A loose or corroded battery cable. A problem with the alternator or voltage regulator. Damaged cells or plates inside the battery.
In general, restoring full power to your rechargeable batteries can take anywhere from one to four hours, although your experience can vary widely based on the physical capacity of your battery pack.
Your engine needs to be running at highway speeds for the alternator to start seriously charging the battery. How far do you have to drive to charge your battery? The short answer: Far. Plug-in battery chargers estimate 10-24 hours to fully charge a car battery.
Depending on your battery charger, it may take 4-8 hours to charge your battery enough to start the car a few times. It may take 10-24 hours to charge your battery up to 100 percent.
A car battery has 48 amps, so depending on how many amps your charger has, divide 48 by the charging rate and that is how many hours it takes. For example if your charger charges at 6 amps an hour, 48/6=8, so it will take 8 hours to fully charge a battery.
The battery for the Shark – Rocket IX141 Cordless Pet Stick Vacuum should take approximately 3 hours to reach a full charge. You can leave the unit plugged in overnight without there being any damage caused the the battery.
A blue light means that it is too cold to charge the battery. Lithium batteries cannot be charged at a temperature below 3°C (37.4°F).
A blue light means it`s fully charged. If it`s blinking red that means it running low on energy.
Introduction. Is your Shark ION Robot S87 battery draining quickly or not charging? This is because batteries have a life span which decreases with every charge. If that is the case, you may need to replace the battery.
First off, if you read the manual you will see that the 2 flashing lights (first and third light) means the battery needs to cool down before it starts charging. Leave it plugged in and it will start charging when it cools. Secondly, when it does charge you will only see one light flash if it is completely dead.
A solid green light shows that the vacuum`s brush roll is spinning correctly. In contrast, a solid red light indicates that there is a blockage that`s preventing the brush roll from spinning. A flashing red light also indicates an error, but this is usually related to the vacuum overheating.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I purchased a brand new P113 Ryobi charger about 2 years ago. It has never worked. If I put a P104 battery in for a charge, it looks like it works correctly. I push the battery tester on the battery itself, and it says full charge, but when I go to use the bateery, it dies right away. I have tried three new P104 batteries. The batteries charge on my charger at work with no problem. The funny thing is, I don't need a battery in the charger and the charger does the same thing, It runs the test
ANSWER : If you have your receipt, check with Ryobi to see if it is still under warranty. It comes with either a 2 or 3 year warranty, depending on when it was purchased. If it is still covered, get it replaced/repaired. If it is not, buy the P117 charger. $30 at Home Depot. It has a 90 day satisfaction guarantee. If it charges your batteries properly, you’re good. If not, bring it back if you don’t like/want it. My P113 won’t get out of test mode now, or charge Lithium batteries anymore. So I bought the P117 yesterday. Works great, and it’s a lot cheaper than new batteries! And it has a 3 year warranty.

Battery charge I just purchased a new battery pack insert for my Roomba, Replacement
was a breeze and it now works great. My question is; The last battery I
bought ( not from you) was a full cased roomba battery pack that didn’t
last a year. Roomba says leave the r Roomba charging all the time so
it’s ready when you need it, and that’s nice but I feel that leaving it
charging like that it will kill the battery faster as it is always warm
to the touch. These battery’s should last at least 5
ANSWER : Dave you are correct. You should never over-charge anything like a Roomba, Cel Phone, etc. That will kill a bettery very quickly.

I have iRobot Roomba 4210 and I have a problem with charge battery. The battery is new. When I charging a battery in other iRobot Roomba the battery was full charged. When I charging in my iRobot Roomba the battery was empty. My fast charger is OK.
ANSWER : The charging circuit on the main board is fried. This is a common issue. You need some good electronic repair skills, and equipment, to replace the problem components

This was my grandmothers machine and when she passed there was no owners manual so I am not sure how to use the settings on it or oil it properly. I so want to use it cause it was hers but don’t want to mess up the machine. She never even got a chance to use it before she passed away. I just have no owners manual. I know how to use sewing machines but this one is older and I don’t want to mess it up.
this was passed down to me. and a manual would help in so many ways. even if it was sent in a
ANSWER : May I get the manke and model # so I can help you more

We have a Bissell Proheat Cleanshot 2X Model 9500 Steam carpet cleaner. The first time we used it things were great. The second time we used it it left tracks in the carpet. We have no idea what caused this. We tried using the machine on an entirely different carpet and it did the same thing. After vacuuming the carpet about 10 or 12 times, the tracks are still embedded in the carpet – HELP!!!! We’re read and reread the manual and contacted customer service and received no help.
ANSWER : First things first. It’s only the second time you have used the machine, so it must be fairly new. If you have a receipt and the unit is less than a year old you should take it to an authorized Bissell repair center and have the machine inspected under warranty.
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck

Can you take the Swivel Sweeper battery pack apart to replace the batteries with new rechargeable batteries? Batteries look like AA or AAA, but it appears that the battery pack is sealed. Is there any way to get it apart:?
ANSWER : Yes you can if you have a way to cut through the plastic outer case,(I used a Dremel rotary tool). Inside you will find six double A Ni-mh batteries. I found eight of these for sale on ebay for around ten bucks,then all you do is solder some wire to the batteries like the original battery pack and tape up the case and charge.

My robot will not charge. Tried multiple resets and new battery from irobot.com (both suggested by Irobot customer service) but got nowhere. The vacuum did work for a short time (until the new partially charged battery ran out). If I bypass the internal charging circuits and charge directly from the charger (with jumpers)
the robot seems to work fine. Unfortunatey, there is no mechanism to turn off the charge cycle, so this is not practical.
ANSWER : Replace the battery charger

Owner/user manual Before my sister died she gave me the little grren machine model 1425 turbo brush with heat. That is all I know about it as she did not find the manual and now no one knows where it is and I really want to get it working and learn about it, as I know she loved it. so I really need a manual. thank any one that can tell me if it is on line or something.