Vacuums
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Mix one tablespoon of liquid dishwashing detergent and one tablespoon of white vinegar with two cups of warm water. Using a clean white cloth, sponge the stain with the detergent/vinegar solution; blotting frequently with a dry cloth until the stain disappears. Flush with clear water.
Alcohol may be used to remove iodine stain on the skin. Stains on clothing can be removed by washing and rinsing them in ammonia diluted with water. Stains on starched linens can be removed by washing them in soap and water.
Since iodine is a dye, it must be treated immediately to prevent a permanent stain. Sponge (the method of using a dampened pad to apply light strokes, moving outward from the center of the stain) the area thoroughly with water.
Iodine dissolves easily in most organic solvents such as hexane, benzene, carbon tetrachloride, and chloroform owing to its lack of polarity, but it is only slightly soluble in water. However, the solubility of elemental iodine in water can be increased by the addition of sodium or potassium iodide.
Iodine, a nonpolar molecule, can be mixed with vinegar, a polar molecule, due to the presence of dipole-induced dipole interactions between them. Since iodine is a very polarizable molecule, the acetic acid molecules in vinegar can induce a temporary dipole to the iodine molecules, allowing them to interact.
While iodine can be an effective treatment, it can leave unsightly red or brown stains on your skin. These stains usually fade away on their own after one to two months, but you can get rid of them fast by applying rubbing alcohol to the area.
Do not use a detergent that contains bleach on an iodine stain. Bleach can set iodine stains, making them more difficult to remove.
Even if you have a pristine white carpet that has been splashed with juice, WD-40 is still a great option for removing the stain from the carpets. The first thing you need to do is blot the entire stain using a dry towel. Don`t rub it as the stain will become larger and more difficult to remove.
When cleaning your carpet with baking soda, let it sit for at least 15 minutes. The longer the baking soda stays on the rug, the more odor, dirt, and oil it will absorb, for a more thorough clean. Try leaving baking soda on the carpet overnight and vacuuming in the morning.
Many other readers hastened to tell us that we should have mentioned clear iodine. It is also called decolorized or “white” iodine (yodo blanco in Spanish) and won`t stain the skin the way brown tincture of iodine does.
Iodine – used as a starch indicator. When in solution, starch and iodine turn a dark blue color. Malachite green – a blue-green counterstain to safranin in Gimenez staining for bacteria. This stain can also be used to stain spores.
The iodine does not change color when it combines with the baking soda.
However, the tap water boiling tests in this study showed no iodine-131 loss from the tap water with either short-term boiling (1-10 min) or prolonged boiling (up to 30 min) resulting in up to 3-fold volume reductions.
Baking soda is a basic substance, which means it has a high pH. When it comes into contact with iodine, it can cause a chemical reaction that produces a brownish-yellow color. This is because the iodine reacts with the bicarbonate ions in the baking soda to form carbon dioxide gas and iodide ions.
Do not use topical iodine on deep, puncture wounds, animal bites, or serious burns. To do so may increase the chance of side effects.
If vitamin C is present, the brownish color of the iodine solution will become colorless — the vitamin C serves as a reducing agent and reduces iodine to iodide ions (colorless in solution).
Iodine Staining
When iodine is introduced to a substance that contains starch, it will turn to a dark blue or blue-black hue. Simple starch experiments involving this staining procedure may include potatoes, rice or cereal grains, such as wheat, corn, oats or barley.
As a biological stain, iodine is useful for studying plant cells because it stains starch blue-black and in animal tissue, it can help in the demonstration of nuclei and cell membranes.
A chemical reaction takes place in which the iodine gains an electron and changes from I2 element to iodide ions, I– . Due to this change, the iodine changes to an iodide ion which is colorless.
DO NOT wash into sewer. Iodine may be hazardous in the environment; especially to fish.
To safely use Clorox® Disinfecting Bleach to remove the stain on your shirt, try soaking the shirt in a solution of ¼ cup Clorox® Disinfecting Bleach per gallon of water.
Chlorine bleach is great at removing stains and odors on white clothing, but can wreak havoc on colored fabrics by leaving faded splotches or even burning holes. It also has incredible sanitizing power. Non-chlorine bleach, however, is typically used to clean and brighten colored or patterned clothing.
Mix 1/4 teaspoon of liquid dish soap, 1 tablespoon of white vinegar and 1 cup of warm water. Using a clean, white cloth, sponge the stain with the mixture, applying a little bit at a time and blotting frequently with a dry cloth until the stain disappears.
Hydrogen peroxide is one of your best options for old, ground-in stains of nearly every variety, and luckily, it`s easy to use. Mix a teaspoon of 3 percent hydrogen peroxide with a little cream of tartar or a dab of non-gel toothpaste. blot the paste on the stain with a soft cloth until the stain is gone.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Vacuums
I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
Read Full Q/A … : Vacuums
Carpet vacuum attachment quit working after sucking up a bedskirt. Bedskirt has been removed but carpet attachment will not work. My old vacuum had a reset button on the carpet attachment for use when the carpet attachment sucked up something and turned off. Does the Hoover have such a feature, and, if so, where is it? If not, how do I fix the problem and how do I keep it from recurring? Model # S3765-040. Serial # 100700081298. Purchased 2/08.
ANSWER : I have a Hoover Conquest approx. 4 yrs old. The turbo head is not working Model No. PB4 230-240V AC 50Hz 200w CS4901N (N127) I have been trying to locate another one or another one similiar to fit my machine
Read Full Q/A … : Vacuums
Suction problem I have a Hoover Widepath Fold Away, 12 amp motor vacuum cleaner and the problem I am having is every time I vacuum, the vacuum gets clogged up with carpet. I am probably only able to do one stroke then it gets clogged and I have to stop and unclog it or it spits it out on the carpet. This is very frustrating and I don’t get much vacuuming done. Please can you help me. Thank you. Gwen email is [email protected]
ANSWER : Get rid of the carpet its shredding and falling apart.no sence in vacuuming old rotten carpet.or try using a vacuum without a brush roller and just suction
Read Full Q/A … : Vacuums
I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci
Read Full Q/A … : Vacuums
We have a Bissell Proheat Cleanshot 2X Model 9500 Steam carpet cleaner. The first time we used it things were great. The second time we used it it left tracks in the carpet. We have no idea what caused this. We tried using the machine on an entirely different carpet and it did the same thing. After vacuuming the carpet about 10 or 12 times, the tracks are still embedded in the carpet – HELP!!!! We’re read and reread the manual and contacted customer service and received no help.
ANSWER : First things first. It’s only the second time you have used the machine, so it must be fairly new. If you have a receipt and the unit is less than a year old you should take it to an authorized Bissell repair center and have the machine inspected under warranty.
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
Read Full Q/A … : Vacuums
Kenmore canister vacuum model 116-25512506. It has a 2 stage switch on the handle, the vacuum motor will not work, the carpet beater attachment does work, the vacuum motor will not cut on at all with either stage, 1st stage is vac only, 2nd is vac a carpet attachment. Carpet attachment will work, vac does not.
ANSWER : Try to find the reset button. It should be somwhere near the bottom area. It looks like a red dot that you can push inward. If you can press and hold the reset button, it will restart your suction and solve your problem.
Read Full Q/A … : Vacuums
I sucked up a sock into the carpet attachment of my electrolux 3500 series and the carpet attachment cut off. After the sock was easily removed (it was only wrapped around the brush part) I reattached the carpet attachment, turned the vacuum on and flipped the switch to turn the carpet attachment back on, but it won’t come back on. How can I fix it?
ANSWER : Did you press the reset button? There will be a reset button either on the back of the unit just below the bulkhead or on the top side of the base.
.
.Locate the reset button and press; this should allow the carpet attachment to resume operation.
.
.If you require an Owner’s Manual try downloading the Epic 3500 manual from this site:
.
.http://www.aerusvacuums.com/support/manuals/index.cfm
.
.Locate the reset button and press; this should allow the carpet attachment to resume operation.
.
.If you require an Owner’s Manual try downloading the Epic 3500 manual from this site:
.
.http://www.aerusvacuums.com/support/manuals/index.cfm
Read Full Q/A … : Vacuums
