Kenmore whispertone 100 model 116
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Check service panel for tripped breakers/blown fuses. If breaker is tripped, reset it. If fuse is blown, replace it. If vacuum cleaner is plugged in, be sure power button is in the off position before resetting breaker/changing fuse.
How long do Kenmore vacuums last? A. It`s suggested that the typical vacuum can last up to an average of eight years. With proper maintenance, a Kenmore vacuum could last that long or longer.
Loose connections will cause your vacuum cleaner to lose suction. Make sure that the dust container, the hose, the tube and the brush are all attached properly. If the problem continues, your vacuum cleaner might have a technical problem. If you suspect this to be the case, contact an authorised service agent.
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
The bottom line. Many vacuum brands recommend changing the bag before it becomes full, at least every three months.
Vacuums: For the past decade, Kenmore`s flagship vacuums were made by Panasonic (less-expensive models came from TTI, Eureka, and PhoneMate). Now that Panasonic is winding down its North American small appliance business, upcoming Kenmore vacuums will be manufactured by a company called Cleva.
Kenmore. The Kenmore Appliances brand is owned by Sears but manufactured by various appliance makers. The brand has a long history of over 100 years, having launched in 1913 originally on sewing machines. Appliances include washers, dryers, vacuum cleaners, refrigerators, and freezers.
The two letters at the beginning of the serial number tell you the month and year it was made. Where is my model and serial number located? The first letter identifies the month. The second letter is the year.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
On average, According to Consumer Reports, vacuum cleaners last a median of eight years. But the lifespan varies wildly by not only brand but your own personal use. This should be expected.
Noticeable Engine Power Loss
As the vacuum pressure escapes from the leaking hose, it fills the engine with air. Consequently, you will notice that your vehicle does not have the power that it normally has. This is particularly noticeable when you try to accelerate and the engine lags.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
The problem may lie in your vacuum cleaner`s adapter, charging dock, or battery and the electrical outlet. Try plugging your vacuum cleaner in to another outlet. If it is now working, the problem was in the first outlet that you have used. You should contact a certified electrician if you need to fix that outlet.
The most common problem with a vacuum cleaner is also the easiest to remedy: clogs in the hose or attachments. Also the electrical cord, motor, switch, fan, brushes, and motor bearings can all need repair or replacement. The drive belt may need replacing; and the attachments, hoses, and filters may need unclogging.
Besides getting jammed with dirt and debris, the major problem that cordless vacuums face is a weak battery or failing recharger. Some cordless vacuum batteries are easily replaced while others are not and require that the entire unit be replaced.
One of the easiest ways to increase vacuum cleaner suction is to empty the dust bag or container. Dust containers need to have enough space for airflow, otherwise, they could get clogged and have less suction power. Regularly check your dust compartment and empty or change it when it`s already 70-80% full.
Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
Neglect your vacuum filter bags, and you`ll swiftly lose suction power. This, in turn, places unnecessary strain on your vacuum`s motor. Eventually, your vacuum will become a lot more difficult to maneuver, not to mention less effective at cleaning your rugs, carpeting, or other surfaces.
Regular plastic or poly bags will not work for vacuum sealing. Even a thick six mil plastic bag will have a high oxygen transmittal rate and allow oxygen to enter the package after a completed seal. Home use vacuum sealers come with channeled or textured co-extruded bags.
The Full Dust Bag Indicator in On
It is often recommended, however, that dust bags are replaced when they`re around two thirds full or once a month. Daily and extensive use of vacuum cleaners will create a need to replace dust bags more frequently.
– Vacuum sealed bags are for the short term, no longer than 6 months. If you`re storing clothing sealed airtight in a storage bag, keep track of your items and remember to take them out after six months. Anything beyond six months, you risk them getting permanent damages such as creases and wrinkles, among others.
One caveat: Handling this vacuum`s 23 pounds takes some muscle. In our member survey, Kenmore canisters earned a very good score for predicted reliability and an average rating for owner satisfaction.
Whirlpool makes washing machines, dishwashers, and refrigerators that bear the Kenmore badge. In addition to Whirlpool-branded appliances, the company also manufactures Amana, Jenn-Air, KitchenAid, and Maytag kitchen and laundry appliances.
Investors reacted quite favorably to the news that Kenmore appliances will soon be sold through Amazon.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Power cord can not find replacement power cord for power brush attachment on kenmore canister vacuum, model #2491290 power brush attachment model # 5491290. i can not even find those model #’s anywhere online, not even partsdirect.com. any help would be great. thanks, david
ANSWER : Call 1-800-948-1358 ask for Buck mon.-fri. 9am-5pm est sat.9am-1pm est
Read Full Q/A … : Kenmore whispertone 100 model 116
The power brush floor rug attachment on my Eureka 6997 A Oxygen Canister Vacuum goes on an off as I use it. I replaced the The power cord from the handle has 2 plug in connections:
1 at the handle / upper wand
1 at the lower wand top of the power brush attachment
1 at the handle / upper wand
1 at the lower wand top of the power brush attachment
I replaced the entire wand assembly and it worked great for a year or so and now it’s doing the same thing again. I was told to keep the power switch on the handle set to off when connecting the power brush attachment or it will bu
ANSWER : This is from the prongs not making a good connection causing an arch inside the plugg causing what looks like rust on the plugg. I would try snugging up the connection by squeezing the female section to get a better connection on the prongs when it is plugged in together.
Read Full Q/A … : Kenmore whispertone 100 model 116
Replacing Power Cord Kenmore Progressive Upright
ANSWER : That actually sounds correct, if it’s the model I’m thinking of. As long as you’re talking about connecting to the wires that are held in by the wire nuts you should be good to go.
.
.-R
.
.-R
Read Full Q/A … : Kenmore whispertone 100 model 116
Kenmore vacum wand power cord
ANSWER : Http://www.vacsew.com/vacuum-cleaners/kenmore-vacuum-parts.html/
Try here
Read Full Q/A … : Kenmore whispertone 100 model 116
Kenmore whispertone 100 model 116. powerhead no
ANSWER :
- .
- The motor / cord compartment cover must be removed to access the cord reel. There are four screws that hold the cover to the chassis. Two of the screws are found under the cord-retractor-foot-pedal on the top back of the canister. To access these screws the pedal must be removed. To do this, press the pedal down and look (from the top) for the four plastic clips that attach/hold the pedal hinges to the cover. There are two at the end corners and two in the middle. Using a long, thin flat-head screw driver (or similar instrument) press each clip to unhook/popout the hinges. Note: the foot pedal spring will also come out when the pedal is removed.
The other two screws are found under the curved hinges of the vaccum bag compartment cover. To access these, lift the cover as if accessing the vacuum bag. Keep pulling the cover back until the hinges release from the motor cover. Don’t worry, it is disigned to do this and will not break but it may require a little force. A long phillip-head screw driver will be needed to access and remove each screw
Read Full Q/A … : Kenmore whispertone 100 model 116
Replacing Power Cord to Power Nozzle
ANSWER : The height adjust mech. has 2 tabs, that you have to unlock, It also is easier when you tip the power head so as not to puit pressure on the Ht. Adj. wheels. Use a flat blade screwdriver and if you look down bertween the ht. adj. mech. and the elboe where the wire is, you should be able to see the 2 tabs, just pry it away form the elbow and it will come off. When you put it back on, make sure all wires are routed where they were and tip powerhead, it will snap into place.
Read Full Q/A … : Kenmore whispertone 100 model 116
Have an older model Electrolux canister model. The electric plug is broken so I got a new plug to put on. When I cut the cord to replace the plug, the dang cord retracted into the unit. So how do I get access to the cord area so i can find the end to the cord!
ANSWER : Hi,.
.You have to open the vacuum cleaner and look for the wire..
.It is located inside the circular wheel, where it wind itself up..
.Don’t be afraid to open it, unless your willing to pay somebody just to install a 1$ part..
.Just always remember when taking the screws off and make sure you don’t lose any of them..
.
.Hope that helps you out!.
.
.Thanks for using Fixya!
.You have to open the vacuum cleaner and look for the wire..
.It is located inside the circular wheel, where it wind itself up..
.Don’t be afraid to open it, unless your willing to pay somebody just to install a 1$ part..
.Just always remember when taking the screws off and make sure you don’t lose any of them..
.
.Hope that helps you out!.
.
.Thanks for using Fixya!
Read Full Q/A … : Kenmore whispertone 100 model 116
Cord rewind The power cord is jammed and won’t go in or out. I can’t find a way to get the cover off to have a look at it. Any suggestions please?
Power cord jammed won’t go in or out. Can comeone tell me how to undo the casing to get to the power cord?
Power cord jammed won’t go in or out. Can comeone tell me how to undo the casing to get to the power cord?
ANSWER : Which model do you have..
Read Full Q/A … : Kenmore whispertone 100 model 116
