Dirt Devil UD40235 Bagless Upright Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Simply point the nozzle in the direction you want to spray, and pull the trigger. You can turn off the water by releasing the trigger and can control the flow rate based on how much you depress the trigger.
Simply point the nozzle in the direction you want to spray, and pull the trigger. You can turn off the water by releasing the trigger and can control the flow rate based on how much you depress the trigger.
When you turn the sprayer on, water passes through the spray head on top of the bottle and shoots out the other end. As the water moves through the top of the spray head, it creates a suction or vacuum that siphons the liquid product up the tube to the top of the spray head.
When you turn the sprayer on, water passes through the spray head on top of the bottle and shoots out the other end. As the water moves through the top of the spray head, it creates a suction or vacuum that siphons the liquid product up the tube to the top of the spray head.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

My bissell proheat upright steam cleaner is spraying out through the attachments just fine, but will not spray to the floor when using upright. we’ve taken it apart to find that there is no water at all going through one of the hoses, but it appears the hose is connected behind the on/off and heat switches, we can’t seem to figure out how to get in there to replace that hose….any suggestions on how to access this?? just curious how you would get in to replace the hose, we know it is the hose..
ANSWER : Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101 .
.xbnxb

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

My DC07 Animal Bagless Upright Cyclonic Vacuum has a small attachment for vacuuming carpeted stairs. This attachment is currently not spinning its internal brush necessary to pickup the dirt on the stairs. The rest of the vaccum is working fine. The suction cap on this attachment is pulled out, as it should be. I have checked the vacuum over thoroguhly and there are no bloackages anywhere.
ANSWER : Make sure to extend the wand straight up and completely out of the handle and watch that you don’t kink the hose.

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

I have a Kenmore upright progrssive intell clean. For some reason it isn’t sucking when I use it to vacuum. When I use attachments they work fine, but when I plug the hose back in after using the attachments and turn it back on it makes a weird noise and I can feel air blowing out of the back. Can you help me resolve this problem?
ANSWER : You have the answer and just don’t know it. You are there so keep looking. Somewhere between where the suction hose connects with the lower hose and the power-head. There is a blockage, you may need to turn the unit upside down and look there or try using a wire with a hook on one end, to extract the blockage. but something is blocking the tube from letting air and debris from traveling up the tube.

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

DIRT DEVIL VACUUM 4 MONTH OLD AND HOSE SPLIT TOOK BACK TO ARGOS TRIED TO INFER IT WAS MY FAULT ENYONE HAD THIS PROBLEM ? THE STRETCH HOSE SPLIT AND I HAVE NOT HAD THIS HAPPEN WITH ENY OTHER CLEANER THE SALES GIRL IN ARGOS SAYS THIS WAS MY FAULT . DIRT DEVIL VACUUM DDCYLBG5 BAGGED CYLINDER G TABERN.
ANSWER : From the Argos website… they must repair or replace or refund, up to 1 year. The squeaky wheel gets the grease, go over her head.. .If there’s a fault with the product…
.We’ve made it easier!
.

    .

  • If you bring it back to us within 30 days with your proof of purchase*, we’ll give you a
    replacement or a refund. .
  • If you’ve had the product for up to 1 year, we’ll repair the product or, if that’s not possible, give you a replacement or, if that’s not possible, a refund. .
  • Please note that all large kitchen appliances are excluded from our 30 day guarantee, but if your item develops a fault within 30 days, call us on 0845 640 0800 and one of our agents will assist you with your problem. If faulty and if it cannot be repaired we will arrange a replacement free of charge or you can opt for a refund. .
  • This does not affect your statutory rights.

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

I have a Kenmore upright progrssive intell clean. For some reason it isn’t sucking when I use it to vacuum. When I use attachments they work fine, but when I plug the hose back in after using the attachments and turn it back on it makes a weird noise and I can feel air blowing out of the back. Can you help me resolve this problem?
ANSWER : Open this manual to page 18 and clean all the filters listed to restore air flow.

http://www.managemylife.com/mmh/lis_pdf/OWNM/L0908343.pdf

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Read Full Q/A … : Dirt Devil UD40235 Bagless Upright Vacuum

Hi, my name is Mea Archer, owner of the vacuum cleaner blog, the niche website that I have developed to provide the most up-to-date news, reviews and the latest advice and information for all things vacuum cleaner related.