Vacuums
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
For one, all dry-use filters on the shop vacuum must be removed. With most models, this includes the paper bag and paper filter but not the foam filter. Paper filters become water-logged, which impedes airflow. For another—and most importantly—the water cannot be allowed to rise as high as the motor and fan.
If you`re using your wet-dry vac to clean a dry surface, check that the filter has been correctly placed. You`ll need it—the filter prevents dust from blowing out of the top while you`re cleaning. For wet surfaces, however, you`ll need to remove the filter entirely.
Wet/dry vacuums can handle: Floor Cleaning: Many wet/dry vacuums come with attachments for cleaning hardwood flooring and they can even be used as a standard vacuum for cleaning upholstery and curtains.
Our Shop-Vac® disposable filter bags install right in the tank of your vacuum and collect anything and everything you clean up, no matter how messy or nasty. Once you`re done with the job, simply remove the bag and dispose of the entire thing. No muss, no fuss.
One is used to vacuum, and the other is used to make the exhaust of the vacuum a blower. Shop vac, and similar brands, have one hole for intake, ie to vacuum with, an the other hole is the blower output, which can sorta be used to blow stuff around.
When you use a vacuum cleaner without a HEPA filter, these particles are stirred up and put back out into the air through your vacuum`s exhaust. Regular filters can`t remove these harmful particulates and this puts the people in your home at risk.
Wet dental vacuums (also referred to as wet-ring vacuum pumps) use water to create vacuum. Dry dental vacuums create that vacuum pressure by pumping dry air, using turbines or rotary vanes to create suction power.
For light vacuuming, you can leave your multiport valve filter set to “Filter.” For bigger jobs and larger amounts of debris, set your filter system to the “Waste” setting, which does sends the water down the drain, rather than through the filter.
You should clean out your shop vac whenever you notice debris sticking to the insides of the canister and hose.
A full bag will reduce the effectiveness of your vacuum cleaner, as well as contribute to poor air quality. It could even cause damage to the machine itself which could be expensive or impossible to repair. The take-home message is: check vacuum bags regularly and replace them when they are more than half full!
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I borrowed a Shop Vac Ultra plus wet dry vacuum to use as a dry vacuum. It needs emptying. How do I open it, and clean the filter? Thanks
ANSWER : WHEN IT FULL U WILL KNOW WHEN IT CAN **** UP ANY THING CLEAN ALEAST EVERY TWO WEEK
Read Full Q/A … : Vacuums
I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.
ANSWER : .Vacuuming Liquids
.1. When picking up small amounts of liquid
.the filter may be left in place.
.2. When picking up large amounts of liquid
.we recommend that the filter be
.removed. If the filter is not removed, it
.will become saturated and misting
.may appear in the exhaust.
.3. After using the vac to pick up liquids,
.the filter must be dried to reduce the
.risk of possible mildew and damage to
.the filter.
.4. When the liquid in the drum reaches a
.predetermined level, the float mechanism
.will rise automatically to cut off
.airflow. When this happens, turn off
.the vac, unplug the power cord, and
.empty the drum. You will know that the
.float has risen because vac airflow
.ceases and the motor noise will
.become higher in pitch, due to
.increased motor speed.
.IMPORTANT: To reduce the risk of damage
.to the vac do not run motor with float
.in raised position
.1. When picking up small amounts of liquid
.the filter may be left in place.
.2. When picking up large amounts of liquid
.we recommend that the filter be
.removed. If the filter is not removed, it
.will become saturated and misting
.may appear in the exhaust.
.3. After using the vac to pick up liquids,
.the filter must be dried to reduce the
.risk of possible mildew and damage to
.the filter.
.4. When the liquid in the drum reaches a
.predetermined level, the float mechanism
.will rise automatically to cut off
.airflow. When this happens, turn off
.the vac, unplug the power cord, and
.empty the drum. You will know that the
.float has risen because vac airflow
.ceases and the motor noise will
.become higher in pitch, due to
.increased motor speed.
.IMPORTANT: To reduce the risk of damage
.to the vac do not run motor with float
.in raised position
Read Full Q/A … : Vacuums
Shop vacuum float rises to shut off vaccuum immediately when turned on. Is using foam filter covered by Shop vac paper filter. Vac is shopvac 86L450
ANSWER : Click this link for video help
http://www.ehow.co.uk/videos-on_4811_care-portable-shop-vac.html
http://www.ehow.co.uk/videos-on_4811_care-portable-shop-vac.html
Read Full Q/A … : Vacuums
I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
ANSWER : No – simply remove the filter. That is the only step necessary!!
.
.Hope your cleanup goes well!!
.
.Thanks for using FixYa – a FixYa rating is appreciated!!
.
.Hope your cleanup goes well!!
.
.Thanks for using FixYa – a FixYa rating is appreciated!!
Read Full Q/A … : Vacuums
I had used Dyson DC08 to **** out a wet car carpet. A few days later when using the V/C, there was a burning smell. Subsequently I washed the flexible hose, changed the pre-filter and post filter , but I wrongly put the pre-filter in the spot for the post filter. When the V/C was next used, there was again a burning smell and sparks. The filters were switched, but the V/C would not re-start.
What shall I do?
What shall I do?
ANSWER : Hi there,
We’d strongly recommend against using your Dyson to pick up water. If you haven’t already got in contact with us directly, I’d encourage you to do so. One of our experts will be happy to recommend the best course of action. You can call us free on 08002980298 – our Helpline is open from 7am until 10pm, 7 days a week. We’ll look forward to hearing from you.
Kind regards,
Jack
Dyson Online Customer Support
Read Full Q/A … : Vacuums
I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
Read Full Q/A … : Vacuums
Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)
Read Full Q/A … : Vacuums
MY VACUUM ISN’T PULLING AS STRONG AS IT USED TO SO I THINK IT NEEDS A NEW BELT. I CAN’T FIND THE MANUEL ON IT SO I NEED SOME INSTRUCTIONS ON HOW TO CHANGE THE BELT. I DON’T WANT TO BREAK MY VAC. CAN SOME ONE PLEASE INSTRUCT ME ON HOW I SHOULD CHANGE THE BELT PLEASE. TYPE VAC: EUREKA THE BOSS WHIRLWIND LITE CYCLONIC POWER CANISTER TYPE VAC. THE HANDLE IS DETACHABLE TO CLEAN IN THE CORNER WITH A SMALL EXTENSION.
ANSWER : You can get Eureka replacement belts here:
Read Full Q/A … : Vacuums
