Bissell 26506 Perfect Sweep Upright Vacuum\015 Can’t get the plastic canister off. thanks for your help.\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Put the Dirt Tank back on the vacuum. Insert the bottom first, then push back until you hear a click. You`ll then need to remove the tank lid by twisting counterclockwise.
Use the Perfect Sweep Turbo in handheld mode by using the handle connector piece on the foot of the Sweeper as a handle. To empty, first make sure that the unit is turned OFF and then lift the dirt cup out. Empty the dirt cup over a waste container. Replace the dirt cup by pressing it back into the foot of the sweeper.
Once unplugged, simply move the lock button on the front of the Easy Empty dirt tank to the left. Then, remove the tank. To empty, press the bottom lid release button on the back of the dirt tank.
First, turn off your machine and easily remove the tank to carry it to a convenient sink. Remove the tank top. If you still have clean water & solution in the bladder, you can use your hand to cover the opening to ensure this does not spill out with the dirty water. Pour out the dirty water.
Once unplugged, simply move the lock button on the front of the Easy Empty dirt tank to the left. Then, remove the tank. To empty, press the bottom lid release button on the back of the dirt tank.
First, turn off your machine and easily remove the tank to carry it to a convenient sink. Remove the tank top. If you still have clean water & solution in the bladder, you can use your hand to cover the opening to ensure this does not spill out with the dirty water. Pour out the dirty water.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
The power brush floor rug attachment on my Eureka 6997 A Oxygen Canister Vacuum goes on an off as I use it. I replaced the The power cord from the handle has 2 plug in connections:
1 at the handle / upper wand
1 at the lower wand top of the power brush attachment
1 at the handle / upper wand
1 at the lower wand top of the power brush attachment
I replaced the entire wand assembly and it worked great for a year or so and now it’s doing the same thing again. I was told to keep the power switch on the handle set to off when connecting the power brush attachment or it will bu
ANSWER : This is from the prongs not making a good connection causing an arch inside the plugg causing what looks like rust on the plugg. I would try snugging up the connection by squeezing the female section to get a better connection on the prongs when it is plugged in together.
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
My power brushes on my bissel carpet cleaner stopped working. They do not rotate. This is the 2nd power cleaner I have bought and it has the same problem as the first one. What is the problem with the power brushes. After 3 uses they stop working. Bissel Proheat 2X Model #8920
ANSWER : The brushes will only work if the handle is released and the ProHeat vacuum is running . There is a micro switch inside the lower handle that switches on the DC carpet brush motor. The DC power for the motor comes from a Bridge Rectifier on the PC Board. [email protected]
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
My power brushes on my bissel carpet cleaner stopped working. They do not rotate. This is the 2nd power cleaner I have bought and it has the same problem as the first one. What is the problem with the power brushes. After 3 uses they stop working. Bissel Proheat 2X Model #8920
ANSWER : You need to change the belt(s). You can find the belts for this model here.
http://www.vacbelts.com/bissell-proheat-belt-combo-pack.htm
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
Power head attachment works great when plugged into the hose part of the vacuum. The problem is when I attach it to the tube for normal use there is no power. I have checked all the connections and switched the power switch on and off still no power from tube to power head.
Is there anything else I can try? Model Callisto
Is there anything else I can try? Model Callisto
ANSWER : Try having someone turn the machine on and off while you pull the cord in and out with the cord more angled towards the on/off switch. Sometimes these models have a break in the cord rewind and will not put the power through to the motor.
Keep in mind this is repairable, and if the unit is less than 5 years old it should still be under warranty.
Good luck .
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
No power i try to turn it on no power i treid different power source no luck check everything no power
ANSWER : It could be the switch button that you push to turn it on (2031199), or the switch (2031243) could be the problem. If not those 2, then the cord could be bad or even the motor (2031214). I would check that switch button first.
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
Got a Filter Queen Majestic Limited Edition, the one with the high and low power switch, an I have to change the power cord. How can I open the main unit to reach that power cord?
Thanks,
ANSWER : First remove the top cap under your handle.
.Then, remove the three screws under the handle.
.remove the rubber cover on the switch
.undo the clamps on the side of the unit
.lift off the chrome cover with the cord on it by the handle itself.
.
.When you have the access there, change the filter inside the upper chamber as well.
.
.Good luck
.Then, remove the three screws under the handle.
.remove the rubber cover on the switch
.undo the clamps on the side of the unit
.lift off the chrome cover with the cord on it by the handle itself.
.
.When you have the access there, change the filter inside the upper chamber as well.
.
.Good luck
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
Power cord can not find replacement power cord for power brush attachment on kenmore canister vacuum, model #2491290 power brush attachment model # 5491290. i can not even find those model #’s anywhere online, not even partsdirect.com. any help would be great. thanks, david
ANSWER : Call 1-800-948-1358 ask for Buck mon.-fri. 9am-5pm est sat.9am-1pm est
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
I have a Dyson Animal upright (purple). I took it apart to clean the cyclone chambers. When re-assembling the bottom closed before the opening rod was inserted. I can’t get the opening rod installed with the bottom opening closed. How do I open it? Thanks.
ANSWER : I looked in our DC07. I would try removing the top again and getting a long dowel or the opening rod, insert it down into the unit and PUSH. The opening rod opens the latch by pushing it, not pulling it. Here are some pictures of the latch. Top pic is in the unlock position. Bottom is the normal position.
I hope this helps.
Read Full Q/A … : Bissell 26506 Perfect Sweep Upright Vacuum
