at all. I took off the beater bar to see if there were any obstructions, but there were none. Could you please help me with this. Right now my husband is saying that we should not have bought such an expensive vacuum (which he has said all along). I want to prove him wrong!! Up til a couple of weeks ago, it was working perfectly and I have loved it!
Dyson DC25 All Floors Bagless Upright Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Full-sized upright vacuum. Ball technology allows you to turn on a dime. Quick-draw telescope reach wand expands for easy high-reach cleaning. Patented Root Cyclone technology cleans all floor surfaces.
You`ll find it on your machine, on a label that looks like this. Example: 123-CA-A12345 or AB1-CA-A123456. First two fields are required. Example: 123-CA-A12345 or AB1-CA-A123456.
Most cases of a jammed or stuck brush bar are quick and easy to fix, simply pulling the debris gently from the brush bar. Alternatively, if you need to clear a problematic blockage, you can take the brush bar out of the housing easily, for quick maintenance.
220 air watts. Ideal for pet hair. Length of hose 4.4m.
Product details
It`s recommended that you replace the HEPA Filter Cartridge Assembly on a yearly basis, as this filter can NOT be washed, and wash the secondary Pre-Motor filter once every 30 days, and replace it after 6 washing`s to maintain peak performance of your Dyson DC25.
Dyson DC25 ANIMAL Upright Vacuum Cleaner.
The Dyson DC25 has a weight of only 7.3 kg which means carrying it up the stairs is no real problem. As it`s only a little over a metre tall makes it easier to store than other models when not in use.
At just 16.12 lbs, DC25 Multi floor is one of Dyson`s lightest full-size uprights.
Dyson V8 Absolute Cordless Vacuum SV10.
The Dyson V6 and V7 batteries are similar, but the V7 does have an edge over the V6. Although the V6 offers 2,200 mAh compared to the V7`s 2,100 mAh, the V7 is able to run for about 30 minutes, whereas the V6 dies closer to 20 minutes.
To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.
This genuine Dyson vacuum part is the reset switch for the Dyson DC24 and D25 uprights. This switch needs to be activated if you experience a power surge while vacuuming, and your vacuum turns off as a result.
525 Watts generated by the Dyson digital motor V10.
TheDC25 has 220 air watts of suction power. The Dyson DC25 uses a HEPA filter. What exactly is a HEPA filter? A HEPA filter (high efficiency particulate air) is a high-efficiency air filter that is capable of removing at least 99.97 percent of airborne particles 0.3 micrometers or larger.
Wash filters in cold water only
(don`t use detergent or wash in a dishwasher or washing machine). Rinsing under the water supply then gently squeezing the water out of the filter. Repeat until the water runs clear.
Dyson cordless vacuum filters are engineered to capture microscopic particles. Over time, these can build up in the filter and reduce performance.
Dyson Limited, doing business as Dyson, is a Singapore-based multinational technology company. Founded in 1991 by James Dyson in Malmesbury, England, the company designs and manufactures household appliances such as vacuum cleaners, air purifiers, hand dryers, bladeless fans, heaters, hair dryers, and lights.
Counterfeit Dyson machines are very difficult to spot: They appear nearly exactly the same as the genuine Dyson machine: from the logos on the machines to the packaging they are delivered in. Counterfeit Dyson machines even include copies of Dyson`s serial number stickers and Dyson warranty cards.
Location – This filter can be inside the dust bin, remove the dust bin and the filter is located in the upper section of your cyclonic dust bin.
Filters in Dyson air purifiers have been designed to last up to a full year, based on 12 hours of daily use. However, the filter may need replacing earlier depending on environmental conditions. If you live in a highly polluted city, you may find it needs changing sooner.
Dyson power in an ultra-lightweight cordless vacuum. Only 1.5kg.
The best lightweight vacuum we`ve tested is the Dyson V12 Detect Slim.
The only drawback with the V11`s new design is that the unit is considerably heavier than its predecessor. Due to the inclusion of larger (still non-removable) batteries, the new Dyson weighs 3.05kg (up from 2.68kg) and takes an extra hour to charge from empty (it now takes 4hrs 30mins instead of 3hrs 30mins).
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I have a DC25 that I just bought in Dec 10. The last few times I vacuumed the carpet, the beater bar worked on and off. Now it does not move at all. I took off the beater bar to see if there were any obstructions, but there were none. Could you please help me with this. Right now my husband is saying that we should not have bought such an expensive vacuum (which he has said all along). I want to prove him wrong!! Up til a couple of weeks ago, it was working perfectly and I have loved it!
ANSWER : This is a good quality machine which I am sure wil last a long time in answer to your question make sure that the setting is set for carpet and not just flooring ..the head needs to be flat on the floor for the beater to work .I am assuming that this is quite new and therefore no wear to belts, also check no hair is caught around the bar sticking it, I have two daughters and this often happens to me ,,Good Luck.
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
I purchased a Eureka C4910 last year and have a question that I am hoping you can answer.
There are two motor actions with this vacuum, 1) the vacuum suction, and 2) the beater bar. The action of the beater bar is that motor is supposed to automatically shut off when the handle is in the complete vertical position assuming the vacuum is stationary, but then turn on when the handle is tilted toward the floor, assuming the vacuum is moving back and forth.
The beater bar motor turn-on mechan
ANSWER : Good day!
Normally when the motor is easily moved back and forth means that it have a proper lubrication,proper alignment and no clogs.
When the motor and the belt is OK the problem could be on electrical wiring and switch.
If found electrical switch burned out you need to replaced it because when the switch is burn the contact of that switch is open even you turn it ON.that’s why the motor is not function because the voltage is not pass through the circuit because of open switch.You need to replaced it.
And check some fuses if any and other burned electrical wire.Replaced it also.
Thank you and don’t forget to rate my answer.
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
We have a Bissell Proheat Cleanshot 2X Model 9500 Steam carpet cleaner. The first time we used it things were great. The second time we used it it left tracks in the carpet. We have no idea what caused this. We tried using the machine on an entirely different carpet and it did the same thing. After vacuuming the carpet about 10 or 12 times, the tracks are still embedded in the carpet – HELP!!!! We’re read and reread the manual and contacted customer service and received no help.
ANSWER : First things first. It’s only the second time you have used the machine, so it must be fairly new. If you have a receipt and the unit is less than a year old you should take it to an authorized Bissell repair center and have the machine inspected under warranty.
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
Windtunnel first one used 6 times beater bar stopped working, took apart cleaned and belt was fine. this one had a reset switch for beater bar. had insurance at best buy so returned for a new one. used 2x beater bar not working and not dirty, no reset switch on this one., now back to the store for another? i don’t even want the same one. I wonder how many they are gonna give me. This seems to be a common occurance.
ANSWER : Sorry, you feel like that. I have rentals and 6 windtunnel’s (I prefer the bagged ones) and have never had a problem such as you have described. I think Hoover makes a great vacuum.
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
Dyson animal We bought a Dyson Animal from Sears a few years ago along with a service contract. We took it each year to be serviced. One year I took it because it lost it’s suction. They sent it to the factory, but it came back still not working right. We did the same procedure over ands over many times than I can remember. I now have the cleaner in my garage and am using my old vacuum because I just can’t seem to get anywhere with Sears. Please help me. We paid almost $600.00 and now it can’t b
ANSWER : As someone who works for Sears, let me just say right now.. The service contract you bought sucks.. and does not really do anything for you. it was just a wast of money ( they have a new one now.. thats so much better because you get your money back in full on a gift card but anyways) When you buy a dyson from any place you really have no need for that contract, since sears CANT touch your dyson. Your really better off calling Dyson up and talking to them yourself, i know you said sears sent it out.. but wait heres a shocker.. Sometimes they never *really* send anything out to be fixed.. if it does not bring them in money, they don’t care.. and then they can get you to buy a *new* vacuum from them with that same S.C. that is of no use!.
.Sorry i cant help with your problem, but just wanted to give you a little insight on how Sears works since K mart bought them.
.Sorry i cant help with your problem, but just wanted to give you a little insight on how Sears works since K mart bought them.
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
Kenmore canister vacuum model 116-25512506. It has a 2 stage switch on the handle, the vacuum motor will not work, the carpet beater attachment does work, the vacuum motor will not cut on at all with either stage, 1st stage is vac only, 2nd is vac a carpet attachment. Carpet attachment will work, vac does not.
ANSWER : Try to find the reset button. It should be somwhere near the bottom area. It looks like a red dot that you can push inward. If you can press and hold the reset button, it will restart your suction and solve your problem.
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
Read Full Q/A … : Dyson DC25 All Floors Bagless Upright Vacuum
