Miele S7210 Bagged Upright Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Please note as of 2023 Miele stopped the production of this upright vacuum to give way to its surging cordless vacuum selection.
Where do I find the serial number / model number of my Miele appliance? The serial number / model number of your Miele appliance can be found on the data plate.
Suitable for all Miele hoses with an outer diameter of 32 mm. This connects the vacuum handle (with groove) or the plug-in gland to the hose. Suitable for all Miele hoses with an outer diameter of 32 mm.
Before we go any further, let`s remember that all Miele Vacuum Cleaners share some basic features: All Miele Vacuums come with a Quiet 1200 W motor. That means They all have the same suction power. They are all made of ABS Plastic, which makes them extremely durable but very lightweight.
What Features and Benefits Make Miele Bagless Vacuum Cleaners So Unique? Our bagless vacuums are beloved for these reasons and more: Vortex technology creates superior suction thanks to an air flow of more than 62 miles per hour.
With average use, a Miele vacuum cleaner bag should last for around three months. However, this can vary depending on your home and how often you vacuum. If you have a large home or wall-to-wall carpets, budget to replace your bag every month.
Durability & Warranty – If you`re looking for a vacuum cleaner with durability and longevity, look no further than Miele. Miele vacuum cleaners are designed and tested to last for 20 years. Miele vacuum cleaners come with a 7-year warranty on the motor and a 1-year warranty on parts and labor.
Vacuum cleaner hose diameter is measured internally. Most common size is 32mm internal diameter (approximately 38mm to 39mm external diameter). Other less common vacuum cleaner hose sizes are 27mm, 35mm, 36mm, 38mm, 40mm, 51mm and come in a variety of colours.
Vacuum hoses tend to be anywhere between 3/16 inches in their inner diameter and 5/8 inches.
Cylinder vacuums are typically more powerful and have a larger dust capacity, so need emptying less frequently. They also have a larger cleaning radius — the length of the cord — than upright vacuums. That`s why you`ll find the professionals use this type of vacuum cleaner in offices and hotels.
With 11 employees, 4 lathes, and a drilling machine, Miele and Zinkann launched their first cream separators and butter machines in 1899 in Herzebrock, Germany. Their guiding principle, “Immer Besser” – which translates as “Forever Better”, still shapes the company today.
The choice of canister vs. upright vacuums depends heavily upon your usage, personal preference, and budget. Canister vacuums are usually quieter, provide better suction for bare floors, and cost more. Upright vacuums, on the other hand, are efficient carpet cleaners, less expensive, and easier to move and store.
Most products are made in Germany or Switzerland, Austria, the Czech Republic and Romania, there are ten showrooms in the United States.
Are all Miele Vacuums Made in Germany? Miele vacuums are made at their Bielefeld plant in Germany, the second largest and second oldest factory of the Miele group`s 11 manufacturing sites in Europe. Motors for the Miele merchandise range are supplied and made from their plant 230km away in Euskirchen.
When to Change the Filter Bag. You should change the Miele filter bag when you notice that the display of the airflow indicator is filled out with red color. These bags are disposable and designed for one-time use and if you attempt to reuse, you will notice that the suction power of the vacuum will be reduced.
Bosch and Miele offer similar cutting-edge dishwashing technologies, but Bosch provides a more affordable solution. Both brands promise a decade or more years of reliable performance with sensor wash technology, flexible loading options, and high-quality materials for long-term use.
The first consideration when picking a vacuum is the type of flooring in your home. If you have a lot of carpeting, you`ll need an upright or canister vacuum for deep cleaning. If you have mostly hard-surface flooring, you might be able to use a stick or robotic vacuum for light cleaning jobs.
Description. Miele`s well known and well trusted brand is back at it with the Miele Type G/N vacuum cleaner dust bags. These bags are compatible across multiple Miele vacuum models and each package comes with 4 dust bags, 1 motor protection filter, and 1 air clean filter.
In 1978, two engineers founded SEBO in Velbert, Germany. Since then, SEBO has become the most important manufacturer of high-quality, commercial vacuum cleaners in the world, with sales in Europe, Asia, Africa, and North America.
The short answer is that most Miele vacuums are made in Germany (with a few components coming from Romania), although some of the company`s lower-priced models are built in China. Let`s take a closer look at where this popular company builds its vacuums.
He said Miele was top-tier in the industry, it`s been around longer than most other dishwasher brands, and its dishwasher`s average lifespan is 10–20 years.
Long term cover Miele is the only manufacturer to offer a comprehensive warranty extension to a total of 10 years – optionally available from 1 year warranty extension. Maximum security During this extended warranty period, no repair costs will be incurred for defects unless caused by intent or gross negligence.
Miele upright vacuums are outfitted with premium filtration innovations and strong cleaning performance to make your home the cleanest on the block. Miele U1 Dynamic uprights feature a strong 1200 watt suction motor with 140 cubic feet suction at the intake.
Durability & Warranty – If you`re looking for a vacuum cleaner with durability and longevity, look no further than Miele. Miele vacuum cleaners are designed and tested to last for 20 years. Miele vacuum cleaners come with a 7-year warranty on the motor and a 1-year warranty on parts and labor.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My bissell proheat upright steam cleaner is spraying out through the attachments just fine, but will not spray to the floor when using upright. we’ve taken it apart to find that there is no water at all going through one of the hoses, but it appears the hose is connected behind the on/off and heat switches, we can’t seem to figure out how to get in there to replace that hose….any suggestions on how to access this?? just curious how you would get in to replace the hose, we know it is the hose..
ANSWER : Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101 .
.xbnxb

I have a miele upright S7210 and can not find the replacement hose. Any ideas?
ANSWER : What do you mean by the replacement hose? The original part for your 7210 twist includes the handle grip to lock in to the adjustable wand, or do you mean the short hose in the base behind the brush roll?

Hello, I have a Hoover quadraflex Powermatic central vacuum system Model # s8099-031 that requires a new replacement 35 ft hose…I have contacted Hoover and they do not know where to buy a replacement hose for this model. I live in Canada. Any idea where I can get a replacement hose for this system? Thanks kindly, Tammy
ANSWER : Tammy, no info re your location, so I”l try this.
Your Hoover hose is shot because it was made of rubber.There are new swivel handled, tangle proof lighter hoses made of vinyl which will last much longer and can be adapted to the old Hoover head by changing the upper steel tube.
Find a Hoover service center, outlet in the yellow pages and ask for the “NEW “style, gray“Plastiflex“ brand hose and upper adapter tube sold with new Hoovers at Costco and you will be all set. Then, when the head eventually dies, you can upgrade to a far better one , while still having the Hoover cannister, the hose and tools do not need to match the original tank.

Hose Problem The hose broke just above the cuff on the inlet end of the hose.  I found that the hose doesn’t thread into this cuff but appears to be heat bonded in some way. Can I get a replacement cuff or do I have to replace the hose?
ANSWER : Looks like you can just get the hose, part #38479-4, It should just screw into the adapter or it may be glued in.

Replaced internal pump. Color coded hoses for replacement. Marker has worn off hoses. Need proper routing of hoses from clean water tank, to heater to spray nozzles. An internal schematic of hose routing is preferred.
ANSWER : Hi
.
.Thanks for using FixYa. Please remove the top cover of your Bissell cleaner. Now place the Auto-Mix selector knob to the water only position. Turn the cover over. You will notice an angle on the top of the piston. This will fit between a couple of plastic ridges on the top cover by the selector screw.
.Now angle the piston slightly forward and engage the angled cut in the top of the piston with the screw thread and pull back. Turn the screw to the high traffic position and replace the cover. Apply a very little amount of silicon grease around the Auto-Mix piston ‘O’ ring, it will ease the re- installation of the cover.
.
.You can also see this manual for more detailed instructions–
.
.Bissell 7901 steam cleaner Manual
.
.Please do accept the solution if the issue is resolved or else revert for further assistance.
.
Thanks
Rylee

Where do I find a replacement for the hose that attaches to a Shark EP 3005 canister? The hose I have to the vacuum split.

Suction Hose The suction hose has cracked so the suction feature no longer works. I would like to replace it, but cannot find that it is a replaceable part. Hopefully someone else has a solution.
ANSWER : Go to0 http://www.thehooverstore.com/h3000.html there also is a parts break down. You can email them at http://www.thehooverstore.com/contactus.html

I also have a Hoover upright and I need to replace the electrical cord. I have dimantled the back, where the tools are stored, and the hose. I still cannot find the screws or whatever, to get to the area behind the cord, so I can replace it. I think I will have to take off the bottom too. Has anyone out there tried to do this? It seems crazy. This machine works great so I hope I can also put it back together. Thanks for the help.
ANSWER : Since I do not know your specific model I can only supply you with general instructions. Be aware that most of the time you only need to gain access to the on/off switch to replace the power cord. Also Make sure that you are replacing the existing cord with a comparable one. Vacuum cleaner cords are different from most other types. They need to with stand being run over repeatedly and subjected to a spinning brush that would burn through other types in a matter of seconds.
If you keep that in mind then……

One of the most important rules in the universe is “If it was put together it can be taken apart”. I take my vacuum apart just for fun. I will use as an example the most common type of vacuum, an upright bagless. You will need to remove the lower unit. You will find after the top section has been removed four screws, (two on each side), holding the upper section to the lower with two plastic half circles clamps. In most newer vacuums of this type these are the only things holding the two pieces together aside from the hose. The motor housing is usually held together by several screws. Once you get the upper and lower sections separated you will be able to gain access to the screws.
Probably the most important thing I can tell you is to keep track of the screws. Use a piece of styrofoam draw a shape of a vacuum on it and press the screws into it in the area that they came out.
If you need more specific instructions you will have to clarify this with the exact make and model.
Hope this helps.