Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Your Dyson DC07 has been rejuvenated with a new drive belt, allowing the brushroll to move freely while it cleaners your home.
The Dyson DC07 was introduced in 2001 with brand new Root Cyclone technology.
Dyson Belts, Fits: All Upright Vacuum Cleaner Models Using one Belt System, 3 Belts in Pack.
Look for a control knob on the front right hand side of your Dyson vacuum. If your machine has a knob it is a clutched model. If your machine does not have a knob it is a non-clutched model.
There are two filters on a DC07, the first is the pre-motor filter, which are washable and is recommended by Dyson to be washed at least every 6 months. The pre motor filter also acts as a protection to the motor, trapping the smallest of dirt or debris from travelling to the motor.
The DC07, released in 2001 was the first implementation of Root Cyclone technology into a cleaner.
You`ll find it on your machine, on a label that looks like this. Example: 123-CA-A12345 or AB1-CA-A123456. First two fields are required. Example: 123-CA-A12345 or AB1-CA-A123456.
The DC07 had a long production run from 2001 until 2008, and came in many different colour combinations.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I have the dyson dc07 all floors and have a new belt- I have removed the black cover but cannot see where to attach the new belt !
Hope you can help-Carole
Windtunnel belt I have a new Hoover Windtunnel canister. The belt keeps coming off. It happened a couple weeks ago (several times after putting the belt back on) so I assumed I might need a new belt as it might have dried out at the store. I ordered new belts and today I used it for about an hour and the belt came off again, twice. There doesn’t seem to be anything to hold the belt on the stem as it seems to slip off. I have tried it centered, to the left and to the right….can you help. I am v
I’ve successfully used a compatible belt – Royal 104425001 .It’s still new, but for the time being at least – it works.
Floor Attachment I took off my floor attachment, but now the belt seems to be off and I can’t seem to get it back on right. I can’t use the attachment and I don’t know why it’s so hard to figure this out. They say, just turn it to belt off, but when i turn it it lift’s it up and can’t line up with the belt off label. Then, when I turn it the other way, it’s off. So I’ve been trying to pull it off so when it lines up with belt off, it’s off. But the I turn it the other way and it’s still off a
.With the floor nozzle off the machine spin the belt lifter around until the red arrows match. If you look at the side that attaches to the vacuum you should be able to see the belt up on the hook. If is not on the hook offf the machine you will never get the belt on. Once the belt is on the hook attach the floor nozzle to the front of the machine. At this point you need to spin the belt lifter back to where the green arrows match. Oh and another suggestion make sure your hieght adjuster the pedals with arrows are all the way up. Hopefully that helps you out.
Hoover WindTunnel Self-Propelled V Belt
I had this same problem with the V belt on my Hoover Vaccuum..
.There are three (3) basic things that will cause the brush roll not to spin..
.1. When handle is upright, brush roll is OFF..2. When switch is set for HARD surface, brush roll is OFF..3. Broken/worn FLAT belt or V Belt, brush roll will not spin.
.I noticed that the brush roll was not spinning when my vacuum was set for CARPET. After removing the cover I noticed that the V belt was loose, I thought the belt was worn so I purchased a correct replacement belt and installed it, but the new belt was also loose and when I turned the large flat belt pulley it did not turn the V belt pulley at the same time..
.I double checked the surface setting and I had the vacuum switch set for carpet, but still when I released the handle out of the upright position the brush roll would still not spin..
.My aggravation finally led me to this posting on FixYa’s website..
.The first thing I did was checked the screw to the left of the V belt as suggested by ejmjr5 and this did nothing to solve the problem or create more tension on the V belt, even when the upright handle was not in the upright position..
.After playing around with the surface setting control switch/nob I notice that when I moved the switch out of the HARD surface setting and over to CARPET, I had thought that the switch was set for CARPET as it visually appeared, but I was not pushing the switch over hard enough to click it into the CARPET setting mode..
.VOILA, the brush roll now spins correctly even though the V belt seams to be too loose for the pulley..
.You really have to force the switch into the CARPET setting. Be sure that you hear the switch/nob click into place..
.Now you can effectively clean up after that hangover of a party!.
Agitator belt failed in my Hoover F5853-900 Steam Vacuum Cleaner. But can not remove bottom Cover .. have removed top cover and two screws from the bottom Cover. The smaller Cover is glued to the large Bottom Cover. Need help.
Unscrew the plate. check if there is any screws at the bottom, if none, exact little pressure to pull out the bottom cover. At this .point you should be able to see the broken drive belt along with the two. drive bars. Remove any debris from the vacuum head. Untangle any long threads .wrapped around the beater bar. These only put more strain on a drive .belt, so keep this area of your vacuum clean..Slip the new drive belt on the beater bar. Connect it with the drive .shaft. You may need to use the screwdriver to stretch the belt enough to. get it over the two shafts.
Make sure the beater bar turns freely with the new drive belt attached. Put the plate back over the beater bars.
Hi my proheat bissell 7901 stopped pumping water to the floor, but it pumps water from the hand hose. I read the manual and followed how to check belt and the flat belt on right side of shampooer is fine and I turned on and it turns and so do the brushes at the bottom of the machine. I was reading online and I guess there’s two belts on this machine? where can I find the other belt to see if it needs replacing. I guess it’s a ribbed belt? that is the water pump belt?
Just taken ours apart with the same problem… found it was caused by the 2 halves of the main casing coming apart in the area where the upright pedal release is. I found this to be due to the upper casing having broken in 2 places – the bottom of the screw wells..This means that the water tank cannot exert sufficient pressure on the valve to release the water..Only solution is a new top cover assembly
I have a Sears Upright vacuum cleaner, model 116.35922500. The vacuum wasn’t picking up. I discovered a clog in the nozzle hose. I attempted to remove the cover of the brush unit to clear the clog. I was unable to remove the cover completely, but was able to clear the clog. My problem now is that I cannot replace the cover correctly. Is there a way to remove this cover? Thanks, Elizabeth
When you tried to remove the cover did you have to put a little force on it to get to the clog
The original belt on my upright Kenmore Progressive broke and I replaced it with the spare that was in the vacuum. The vacuum and spare belt are about 10 years old. Then the spare broke after one vacuuming session and there was a burning smell coming from the vacuum. I ordered new belts and replaced it with the new belt. It seems to be working fine with no smell. I checked the belt after I vacuumed the family room and although it was in tact, the belt was very hot. Is that normal? Should t
The belt heats up due to the friction, as well as being in contact with the shaft of a hot motor. It is normal.