Euro-Pro S3325 Handheld Steam Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Shark Pocket will not make steam

Check that your water tank is full, if you find it is empty, add water. Also check that the tank is free of any cracks or holes that could cause water to leak, and that the tank is properly seated in the device`s housing.

Take a look at charging conditions

If this is the case, check your battery charger to make sure it is working properly, connecting to the battery properly, and that the connectors are not dirty or damaged. If it`s been a few years since you started using the vac, you may need to buy a new battery.

To reset your shark vacuum, put the Power button in the On-Off position and keep the vacuum unplugged. If necessary, clear the hose. Once it has cooled completely, plug the vacuum back in again. Our virtual experts can diagnose your issue and resolve simple problems.
Just like the bigger steam cleaners, handheld steam cleaners are capable of removing stuck on dirt and grime while killing bacteria, dust mites, germs, viruses, lice, bed bugs, and more. However, the usage of the handheld steam cleaners is limited to smaller, light cleaning tasks.
When used correctly, what a steam cleaner is used for is to kill 99.99% of germs and bacteria. It`s a safe, healthy, eco-friendly, all-natural way to clean your home from top to bottom.
Applicable on SC505, SC505a & SC505N — The Shark Professional Portable Steam Cleaner takes approximately 6 minutes to reach its working temperature and is ready for use when the red light on the side of the unit turns green.
check the cap of the water tank to make sure it is correctly and securely attached to the water tank. check your water tank to make sure it is securely and correctly fitted in to the body of the garment steamer – incorrect placement of the water tank can block water from feeding in to the body and boiler of the steamer.
First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.
check the cap of the water tank to make sure it is correctly and securely attached to the water tank. check your water tank to make sure it is securely and correctly fitted in to the body of the garment steamer – incorrect placement of the water tank can block water from feeding in to the body and boiler of the steamer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I have a Bissel 9300-C 0714 BC Carpet Shampooer. It was working great and all of a sudden it stopped working. It still sucks up dirty water but it does not spray water onto the carpet. I can get it to spray water through the smallest hand attatchment but not through the large hand held piece on the base of the machine. I really hope you can help me, I am a dog groomer and I really need my machine to work properly. I can get it to spray water out of the smallest hand attatchment but
that’s all t
ANSWER : The spray jet has become clogged from the soap…. just clean it out. same thing happened to my attachment.

Need duplicate manual for europro shark steamer . lost manual, steamer is about 2 years old, never been used.
ANSWER : Hi,
The link for the manuals…
Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Shark steamer will not work. no light on,no heat, no steam. yes it is plugged in and plug works on other appliance. give me a phone number. prefer talk to live body. thank you.
ANSWER : The number is 1-800-798-7398.
.Here’s the Shark site for chat help. The second link provides phone number and other info.
.They will need to know the model number.
.
.http://www.sharkclean.com/cgi-bin/livew/site.w?location=mcopy.w&mcopy=customerSupport&target=main&frames=no&sponsor=000006
.
.http://www.sharkclean.com/cgi-bin/livew/site.w?location=olc/contactus.w&target=main&frames=no&sponsor=000006

I broke the handle part of the shark steamer #53101. I don’t have the book to try to tell you the parts I need. Can you send me a picture or a copy of the steamer. It is purple. The above number may not be the correct one. It is broken in the center part. It has a little small circular piece that joins the two pieces which are broken. The beginning of the handle at the bottom of the steamer and the next session which has the steam release. The top of the handle is okay . It the middle and bottom
ANSWER : Hi,
Ann there are very few parts for these…

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

I want to recharge my Philips PET741 D/05 portable DVD Player. But when I push the plug into the charging point on the side of the player,at one point, as the plug goes in, there is a quick flash of red – but no more. The red charging light does not light up, and the player does not charge. The plug cannot be held at the point where the sudden momentary flash takes place
ANSWER : 1.With the AC power unit plugged in to the wall plug into your dvd player and wiggle it a little bit and see if the light goes on or off. If so the the power port is bad. .2.Try a different wall outlet to see if it helps..3.Ensure there are no cuts or rips in the power cord. .4.If you have done the following steps and the cord looks good it may be your battery on the dvd player itself..5.If the battery is defective you may need to purchase a new one, keep in mind you may need to purchase another dvd player if you are unable to locate the battery seperatly..6.I would suggest contacting the manufacture and see if you could get just the battery. Hope this helps.

I need an instruction booklet for a Euro Pro X Shark Hand Held Steamer – MODEL S505UK. Please can you help!
ANSWER : Hi,

Here is a tip that I wrote about how to find the parts you need for your Shark

How to Find Shark Parts and Accessories .heatman101

Hand held steamer not working
ANSWER : Make and model please

My shark professional steamer plug gets extremely hot. Is that normal?
ANSWER : No it should not get hot undo the plug and check if the wirers are conected tight one of the main causes is loose wires, have you tried a differant outlet.