Kirby Generation 3 Bagged Upright Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Manufacturing Date: 1990 – 1993

The G3 model introduced a new look and feel to the overall Kirby!

Unlock the Handle Tilt Latch Lever before pulling backwards. Failure to follow this notice could result in damage to the floor. For carrying: Move the Handle Tilt Latch Lever away from the bag to lock the base in place when the unit is lifted off the floor.
The Dyson vs. Kirby vacuum cleaners debate can be complicated, as these brands are so different. If it comes down to price or size, Dyson will probably get the upper hand — but for all other vacuuming considerations, Kirby is the way to go.
Kirby vacuum prices are higher than many vacuums found at big-box stores, but that`s because Kirby vacuums are made of durable materials that will last for years. Why replace an inexpensive vacuum over and over again when you can purchase a Kirby vacuum? This complete home cleaning system that will last for a lifetime.
Q: How can I tell when my disposable bag is full and needs to be replaced? A: There is a fill line on the disposable bag and when the dirt reaches this line you should replace your disposable bag because it is no longer filtering properly.
Vacuum Cleaner: Why doesn`t my vacuum cleaner`s brush roll spin? A broken drive belt, damaged brush roll, jammed brush roll bearings, tripped brush roll motor overload, failed brush roll motor or a wiring failure in the wand or nozzle can prevent the brush roll from spinning.
You can find the model of the Kirby vacuum you have by either comparing your vacuum to those available on the manufacturer`s website or by checking underneath the logo on the front of the handle.
Take your time. Vacuuming slowly will allow your machine to suck up more dirt and dust, and ultimately get your rugs and carpets much cleaner. Slow vacuuming allows the brush to agitate the carpet properly and suck up the unclean bits that emerge.
The answer is that you should always dust first and vacuum later. The reason is simple. When you dust, you`ll find that some of the particles wipe away onto your cloth or duster, but you`ll never get all of the particles.
Their vacuum cleaner prices range from $995 to $2500. Now, you might be wondering if they are worth the large price tag.
Kirby has a great design. He`s expressive, iconic, instantly-recognizable, and easy for kids to draw. A perfect fit for the protagonist of a Game Boy game. He`s simple, but it works extremely well, and its a far more unique look than all the 30-something brown-haired white men that gamers love to play as these days.
It`s heavy.

I just would not recommend this vacuum for older individuals or those suffering from arthritis. The reason why it is heavier is because it is mostly metal, whereas the Dyson is part metal, part plastic (well, I think the newer versions are more plastic than anything).

The price of vintage Kirby vacuum cleaners can vary widely, depending on their age and condition. The least expensive ones are probably worth about $100 and high-end models might sell for $2,000 or more. But if you`re looking to buy one that hasn`t been refurbished, expect to spend several hundred dollars.
Kirby`s Dream Land, released in 1992 for the Game Boy, was the first game in the series.
For more than 100 years, every Kirby has been handcrafted in the United States from die-cast aluminum.
Jim Kirby created the first Kirby vacuum cleaner in 1906, and ever since, The Kirby Company has continuously improved its American-made, hand-crafted Kirby Home Cleaning System design to ensure best-in-class performance.
The bottom line. Many vacuum brands recommend changing the bag before it becomes full, at least every three months. The purpose of changing the vacuum bag when you need to is so that your vacuum cleaner is working at an optimal level.
Don`t be tempted to reuse vacuum cleaner bags. Your motives may be pure, but your air won`t be, and your vacuum cleaner may bite the dust (pun intended) years before its time.
On most Kirby vacuum cleaners, filtration is managed by the filter bag that is used to collect dust and debris. However, some models offer a secondary level of filtration in the form of a foam filter or a screen filter.
There are basically only 3 reasons a vacuum sealer bag will fail: The seal line area was dirty/wet/wrinkled when the bag was sealed or made (if made from a roll). Something in the bag punctured the bag. The bag is defective.
The most common problem with a vacuum cleaner is also the easiest to remedy: clogs in the hose or attachments. Also the electrical cord, motor, switch, fan, brushes, and motor bearings can all need repair or replacement. The drive belt may need replacing; and the attachments, hoses, and filters may need unclogging.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
If all you hear from the vacuum unit is a click at the when you try to start the vacuum motor from inside the house, then the motor in the unit is dead and has to be replaced. A strong odor from the shellac, which coats the copper coil windings, is an indicator that the motor is about to or has burnt out.
the vacuum system may be dirty, the pumping line may be restricted or too small in diameter, the pump may be dirty or with too little capacity, the pumping speed may be restricted due to other causes.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I need a manual for a kirby vac gen #3 – Kirby Generation 3 Bagged Upright Vacuum
ANSWER : Click the link below for the manual It’s a very large .pdf file, so just be patient while it loads;
http://kirby.110mb.com/docs/kirby_sentria_manual.pdf

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.
ANSWER : .Vacuuming Liquids
.1. When picking up small amounts of liquid
.the filter may be left in place.
.2. When picking up large amounts of liquid
.we recommend that the filter be
.removed. If the filter is not removed, it
.will become saturated and misting
.may appear in the exhaust.
.3. After using the vac to pick up liquids,
.the filter must be dried to reduce the
.risk of possible mildew and damage to
.the filter.
.4. When the liquid in the drum reaches a
.predetermined level, the float mechanism
.will rise automatically to cut off
.airflow. When this happens, turn off
.the vac, unplug the power cord, and
.empty the drum. You will know that the
.float has risen because vac airflow
.ceases and the motor noise will
.become higher in pitch, due to
.increased motor speed.
.IMPORTANT: To reduce the risk of damage
.to the vac do not run motor with float
.in raised position

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)

Need Kirby Generation 3 Vacuum cleaner manual. Vacuum is not picking up dirt from floor. Seems to have enough suction to inflate the bag, but when you check the suction under the vacuum, there seems to be extremely litle suction.
ANSWER : If your brush roll is turning and your bag is not overly full, then the only other thing it can be is a clog where the bag connects to the vacuum. Turn the plastic part out away from vacuum and lift off to see if you have something clogging it. It would have to be something big, but not so big that it could not get past the fan. As a rule of thumb, KIRBY never clogs. I suspect that your belt is stretched out and your brush roll is not turning while on the carpet so the brush roll is just in the way rather than brushing your carpet to pick up dirt.

I need a user manual – Kirby Generation 3 Bagged Upright Vacuum
ANSWER : Howdy,
.Kirby has a minimal website, but I was able to find their parts and service number: ....1-800-437-7170.United States and Canada
.Hope this helps:)

My vacuum kirby turned by itself – Kirby Generation 3 Bagged Upright Vacuum
ANSWER : The problem was that the piece that you connect to the wall outlet was broken. I purchased a new cord and it is working fine now. Thank you!