Kirby G5 Bagged Upright Vacuum\015 A manual for a Kirby G5 vacuum cleaner\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Manufacturing Date: 1997 – 1999
The Kirby G5 is one of Kirby`s most popular color by its dark maroon color and sleek design. The most unique feature of the G5 was its “Lexan” fan blade that was redesigned with the help of NASA to increase the overall suction power.
Q: What shampoo can I use in my Kirby? A: You should only use genuine Kirby Carpet Shampoo in Kirby shampoo systems. For a fragrance-free option, please try Kirby Unscented Carpet Shampoo!
Kirby vacuum prices are higher than many vacuums found at big-box stores, but that`s because Kirby vacuums are made of durable materials that will last for years. Why replace an inexpensive vacuum over and over again when you can purchase a Kirby vacuum? This complete home cleaning system that will last for a lifetime.
The Dyson vs. Kirby vacuum cleaners debate can be complicated, as these brands are so different. If it comes down to price or size, Dyson will probably get the upper hand — but for all other vacuuming considerations, Kirby is the way to go.
The Kirby is built in America by employees dedicated to their craft.
Q: How can I tell when my disposable bag is full and needs to be replaced? A: There is a fill line on the disposable bag and when the dirt reaches this line you should replace your disposable bag because it is no longer filtering properly.
On most Kirby vacuum cleaners, filtration is managed by the filter bag that is used to collect dust and debris. However, some models offer a secondary level of filtration in the form of a foam filter or a screen filter.
The power use of a Kirby G5 is minimal, only 600 Watt. This, compared with the average vacuum cleaner, will lead to a considerable reduction of the electricity bill.
Remove the brushroll and clean all hair, string, and lint from the brushroll bearings. If the vacuum cleaner brush still doesn`t spin after you clean the brushroll, consider replacing the brushroll.
Wash the filter bag in water with a light laundry detergent, preferably in an industrial laundry machine on the gentle cycle. Spin the bag to remove excess moisture.
Superior Airflow, Optimal Cleaning
Kirby vacuum systems are engineered to get the dirt that others leave behind. Our HEPA filtration vacuum bags trap dirt and debris preventing allergens from getting back into your home.
For more than 100 years, every Kirby has been handcrafted in the United States from die-cast aluminum.
Kirby vacuum cleaners are made of die cast aluminum where most other vacuums are made of plastic. This makes the Kirby vacuum more durable than other model on the market. This is why the average lifespan of a Kirby is over 30 years.
Their vacuum cleaner prices range from $995 to $2500. Now, you might be wondering if they are worth the large price tag.
Kirby has a great design. He`s expressive, iconic, instantly-recognizable, and easy for kids to draw. A perfect fit for the protagonist of a Game Boy game. He`s simple, but it works extremely well, and its a far more unique look than all the 30-something brown-haired white men that gamers love to play as these days.
The Kirby Company (stylized as KIRBY) is a manufacturer of vacuum cleaners and home cleaning accessories, located in Cleveland, Ohio, United States. It is a division of Right Lane Industries.
Kirby is an action-platform video game series developed by HAL Laboratory and published by Nintendo.
The bottom line. Many vacuum brands recommend changing the bag before it becomes full, at least every three months. The purpose of changing the vacuum bag when you need to is so that your vacuum cleaner is working at an optimal level.
A full vacuum bag can also cause the motor to overheat and eventually fail, resulting in costly repair expenses or the replacement of a new vacuum. If you are using an upright vac with a belt-driven system, a full bag will increase the amount of force required to spin the brushroll, which can damage the belt.
Designed to completely replace disposable bags, the genuine Kirby 190069 Shake Out outer cloth bag is a reusable vacuum bag for several Kirby vacuum cleaning systems, including the Classic III and Tradition vacuums.
Kirby underwent extreme personality changes in his incarnation in There Will Be Brawl. He is a highly playful and malevolent creature with an extremely disturbing and rebarbative personality. He is pure evil and completely insane, but he is also cunning, intelligent, knowledgeable, and manipulative.
Japanese sources do not confirm Kirby`s gender, so he is referred to with gender neutral pronouns for a broader, more universal appeal in the Japanese market, along with most other Kirby characters.
Manufacturing Date: 1997 – 1999
The Kirby G5 is one of Kirby`s most popular color by its dark maroon color and sleek design. The most unique feature of the G5 was its “Lexan” fan blade that was redesigned with the help of NASA to increase the overall suction power.
What is a Good Suction Power for a Vacuum Cleaner? An upright cordless vacuum cleaner should have at least 100 air watts to effectively clean a variety of floor surfaces, with the best Samsung vacuum cleaner reaching up to 210W*.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby’s are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,
ANSWER : You can get better prices from Goodvac.com
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.
ANSWER : .Vacuuming Liquids
.1. When picking up small amounts of liquid
.the filter may be left in place.
.2. When picking up large amounts of liquid
.we recommend that the filter be
.removed. If the filter is not removed, it
.will become saturated and misting
.may appear in the exhaust.
.3. After using the vac to pick up liquids,
.the filter must be dried to reduce the
.risk of possible mildew and damage to
.the filter.
.4. When the liquid in the drum reaches a
.predetermined level, the float mechanism
.will rise automatically to cut off
.airflow. When this happens, turn off
.the vac, unplug the power cord, and
.empty the drum. You will know that the
.float has risen because vac airflow
.ceases and the motor noise will
.become higher in pitch, due to
.increased motor speed.
.IMPORTANT: To reduce the risk of damage
.to the vac do not run motor with float
.in raised position
.1. When picking up small amounts of liquid
.the filter may be left in place.
.2. When picking up large amounts of liquid
.we recommend that the filter be
.removed. If the filter is not removed, it
.will become saturated and misting
.may appear in the exhaust.
.3. After using the vac to pick up liquids,
.the filter must be dried to reduce the
.risk of possible mildew and damage to
.the filter.
.4. When the liquid in the drum reaches a
.predetermined level, the float mechanism
.will rise automatically to cut off
.airflow. When this happens, turn off
.the vac, unplug the power cord, and
.empty the drum. You will know that the
.float has risen because vac airflow
.ceases and the motor noise will
.become higher in pitch, due to
.increased motor speed.
.IMPORTANT: To reduce the risk of damage
.to the vac do not run motor with float
.in raised position
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
Need Kirby Generation 3 Vacuum cleaner manual. Vacuum is not picking up dirt from floor. Seems to have enough suction to inflate the bag, but when you check the suction under the vacuum, there seems to be extremely litle suction.
ANSWER : If your brush roll is turning and your bag is not overly full, then the only other thing it can be is a clog where the bag connects to the vacuum. Turn the plastic part out away from vacuum and lift off to see if you have something clogging it. It would have to be something big, but not so big that it could not get past the fan. As a rule of thumb, KIRBY never clogs. I suspect that your belt is stretched out and your brush roll is not turning while on the carpet so the brush roll is just in the way rather than brushing your carpet to pick up dirt.
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner’s manual and was wondering how to clean the Hepa filter on this model (*this model uses a vacuum cleaner bag also).
ANSWER : Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=794479
.Generic problem for all Vacuums
.I own a self-propelled Hoover
.Posted by gohornsgo on July 17, 2008
.I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner’s manual and was wondering how to clean the HEPA filter on this model (*this model uses a vacuum cleaner bag also).
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best way to clean the HEPA filter is to take it outside and use a blower over the trash can and blow off the dust and dirt, or use things like an old paint brush and brush it off, or you can vacuum it off with another canister vacuum or shop vac if you have an extra one. For the best filtration is to replace it, there fore the air flow will catch most of the dust and dirt and then you would have to watch how fast it gets dirty and then do the maintenance.
.So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. – 7 p.m. EST
.Thanks, Don the Vac Man
Go Ahead. Use Us.
.
.Generic problem for all Vacuums
.I own a self-propelled Hoover
.Posted by gohornsgo on July 17, 2008
.I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner’s manual and was wondering how to clean the HEPA filter on this model (*this model uses a vacuum cleaner bag also).
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best way to clean the HEPA filter is to take it outside and use a blower over the trash can and blow off the dust and dirt, or use things like an old paint brush and brush it off, or you can vacuum it off with another canister vacuum or shop vac if you have an extra one. For the best filtration is to replace it, there fore the air flow will catch most of the dust and dirt and then you would have to watch how fast it gets dirty and then do the maintenance.
.So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. – 7 p.m. EST
.Thanks, Don the Vac Man
Go Ahead. Use Us.
.
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
Need to change electrical cord on g5 kirby – Kirby G5 Bagged Upright Vacuum
ANSWER : This should be fairly easy to do. With the cord unplugged, take the screw out that it holding the hard plastic cord cover onto the base of the machine. This is where the cord looks like it’s going into the bottom of the machine. The next part is a bit tricky. The hard plastic piece holding the cord in can be popped out with a flat head screw driver. On each side of the cover pop the tip of the screw driver into the side and gently pull to the side. Do this on both sides of the cover and it should come right off.
The cord should just pull out.
The cord should just pull out.
Put the new cord in, pop the plastic cover back on, and put the screw back in.
Let me know if you need more help.
🙂
Read Full Q/A … : Kirby G5 Bagged Upright Vacuum
