Euro-Pro S3325 Handheld Steam Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Shark Pocket will not make steam

Check that your water tank is full, if you find it is empty, add water. Also check that the tank is free of any cracks or holes that could cause water to leak, and that the tank is properly seated in the device`s housing.

The Cleaning Nozzle is clogged

Calcium and other minerals may build up in the nozzle, so you may need to clean the nozzle in order to produce steam. To do this, either use the nozzle cleaner provided with the Steam Pocket Mop, or use a straightened-out paper clip.

Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe. For best results, sweep or vacuum your floors prior to cleaning with your steam mop. After use, unplug your steam mop and let it cool before removing the Dirt Grip pads.
First, attach the mop pad to the mophead, then fill the reservoir with water using the filling flask. Once the steam mop is plugged in, it takes about 20 seconds for the steam to build up, and you`ll hear the mop hissing. During the first use, I found that I had to pump the handle a few times to prime the steam pump.
To prolong the life of your steam mop, we recommend using distilled water in the tank. Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe.
How hot does it get? We used a hi-tech thermometer that registered the Shark`s steam at 217 degrees. We also tested on wood floors with no problems. “Does It Work?” We give the Shark Steam Mop a yes.
Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe. For best results, sweep or vacuum your floors prior to cleaning with your steam mop. After use, unplug your steam mop and let it cool before removing the Dirt Grip pads.
Once you plug it in, it starts to heat up the water. To activate the steam, you have to pump the handle up and down. We usually started mopping instead of doing the 10 to 15 pumps because with your natural mopping motion you will pump the Shark Steam Mop each time you go forward.
What Should I Use? Good quality tap water. If you don`t have issues with hard water stains and buildup, your tap water is good.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Need an operating manual for Sewing Machine Singer Merritt 4538, I do have Parts Manual, only need Instruction Manual., thank you much.! Marina L.
ANSWER : These guys sell it for $10 and $3 shipping or you can get a PDF version all the same price.
.
.http://www.sewingmanuals.com/Sewing_Machine_Manuals/Singers.htm

I need Bissell POWERSTEAMER® PROHEAT instruction manual
ANSWER : Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101 .
.hdf

Need operator manual for ultra steam shark – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER :
.Hi,
.
Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head…

Euro-Pro Shark Steam Mop Problem
.
.Here also is a link to get any of the Shark Manuals that you need.
.
heatman101

I need a manual to continue using my bread maker :breadman tr 444I just need a book I have no problem.i just need a manual
ANSWER : You can get the manual on the link below.
.
.http://www.creativehomemaking.com/download/Breadman_TR444_Manual.pdf
.
.Good Luck and please rate 4 thumbs up for the free answer.

Operating manual i have lost my operating manual for my bissell Model #9500 proheat x2 cleaner. where can i get another manual? on one of the sites it shows that i can download the manual but for some reason i can not down load it. can you please help me with this problem?
ANSWER : BISSELL User’s Guides can be downloaded at www.bissell.com
.On the front page under Customer Service click on User’s Guides and enter the model number of your unit.
.User Guide will be displayed as a PDF file.

I have a Shark Navigator, Model NV 22LCO 31 and I need to locate a manual for the vacuum. Is there a website where I can download the manual?
ANSWER :

Hi,

Here.is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it.may not be getting steam to the head…

Euro-Pro.Shark Steam Mop Problem

Here.also is a link to get any of the Shark.Manuals.that you need.

heatman101

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.
ANSWER : .Vacuuming Liquids
.1. When picking up small amounts of liquid
.the filter may be left in place.
.2. When picking up large amounts of liquid
.we recommend that the filter be
.removed. If the filter is not removed, it
.will become saturated and misting
.may appear in the exhaust.
.3. After using the vac to pick up liquids,
.the filter must be dried to reduce the
.risk of possible mildew and damage to
.the filter.
.4. When the liquid in the drum reaches a
.predetermined level, the float mechanism
.will rise automatically to cut off
.airflow. When this happens, turn off
.the vac, unplug the power cord, and
.empty the drum. You will know that the
.float has risen because vac airflow
.ceases and the motor noise will
.become higher in pitch, due to
.increased motor speed.
.IMPORTANT: To reduce the risk of damage
.to the vac do not run motor with float
.in raised position

I need to get instruction manual and some receips for the Welbilt Bread Machine, I just got from my 80 year old Mother. She only used it once or twice but does not remember where the manual is.
The machine Model is ABM 3600. I hope this is the only information that you need. Thank you very much.
ANSWER : I think I have just found what you need…..

Please check this page:

http://www.manualsonline.com/ex/thread/view/idThread/166697

The link is marked “Welbilt_ABM3600_Manual.pdf”

Could you please check it and inform us if this is the right one? If it is not, we will look somewhere else for the manual you need, OK?