ews. Can you help me?
Vacuums
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Fixing a broken or damaged vacuum power cord is another common vacuum repair that do-it-yourself-ers can easily handle at home. Home repairs on vacuums, tools, outdoor equipment, and other appliances can save you a truckload of money at the repair shop, and anyone can take on simple repairs like this one.
It`s also important to pay attention to the vacuum cords. Tishko recommends checking them daily. Replacing a cord might cost $85 in labor and up to $130 for the new part.
If the cord itself is frayed or has exposed wiring, you`ll need to replace the entire electrical cord. Replacing only the plug could leave you open to electrical shock.
Regardless if a cord is damaged by age, heavy use, pinching, or bearing too much weight (when an appliance is hung by its cord), a damaged cord increases the risk of electrical shock, fire, or electrocution, and should NOT be used. “The electric cord on your appliance contains a live wire that is securely insulated.
As a general rule, if the repair is going to cost less than half the cost of a new vacuum cleaner, it`s best to go ahead and get it repaired. When the service tops half the price of a new machine, it`s probably best to invest in a newer model.
Using a heat gun, some soldering wire, and a cutting tool, you can fix the faulty or broken wires, and restore your laptop`s charger to working condition.
When a power cord is damaged, the appliance should be removed from service and the cord replaced as soon as possible to reduce the risk of electrical shock, electrocution or fire. Cord damage can also result when the cord is pinched, caught between or punctured by heavy objects such as legs on a desk.
Recycling Power Cords
To recycle your old cords, e-waste facilities are your best option. Many communities now have dedicated e-waste recycling facilities, either run by private companies or by the local government. Best Buy is another popular e-waste recycler, and power cords are just one type of item they accept.
The electrical plug is the removable connector located at one end of a power cord. The most commonly used types are Type A having two conducting prongs, the neutral and live.
Retractable cord reels automatically pull the cord back to the reel drum, making them easier to operate than manual cord reels. They use a spring mechanism to provide the retraction force. As the cord is uncoiled and pulled out for use, tension builds up on the steel torsion spring.
Description. Cord Winders are a great tool for storing tarp tie outs and other cordage. These plastic spools have a flexible cover, which folds open allowing easy access to wrap the rope around the core. They dispense quickly and easily to help you set up camp without frustration.
The first step in determining if your cord is broken is checking the cord`s insulation. If it has any cuts, cracks, or exposed wires then you need to replace the cord immediately. Broken insulation and exposed wire can also cause your cord to overheat.
Extension cords can overheat and cause fires when used improperly. Overheating is usually caused by overloading or connecting appliances that consume more watts than the cord can handle. Damaged extension cords can also cause fires.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
Over time and extended use, a very fine layer of particles will start to line the inside of a vacuum bag, remaining in place even after the bag is emptied. This means that the bag will lose the proper airflow required to let the incoming air escape. As the airflow is restricted, the suction dies down too.
“We would recommend vacuuming at least once or twice a week—and more often if we have pets—with the right tools to remove dust quickly and effectively,” Patel advises.
A vacuum cleaner gets power from a regular electrical socket, with the average upright design requiring between 450 and 3000 watts. However, the most often used versions use around 1400 watts, equivalent to approximately 1.4 kilowatt-hours (kWh) of electricity each hour.
You Have a Faulty Cable, Adapter, or Power Outlet
A damaged charging cable is one of the most common causes of charging issues and is one reason your charger will stop working. There are many ways cables become damaged, leaving wires exposed or broken.
Simply put, power cords that fail, no matter what the reason, are safety hazards, damaging appliances and causing fires. So, once again, the “when to replace it” answer is every 5 years.
Dead Computer
The most obvious sign of a faulty power supply is when your computer won`t even turn on. Even if everything else on your computer is broken, if your power supply is operational its fan should turn and you`ll still see a power LED light up near the power supply or on the front of the case.
Long cords that are undersized lose power and overheat. Eventually, these cords melt or blow out at their plug connections. Blown extension cords are serious fire hazards. It`s OK to repair the cord with a replacement connection, but do not reuse it for the same application.
The main difference between a power strip and an extension cord is their intended use. A power strip is used to add additional outlets from a single source. An extension cord is used to connect devices placed far from outlets.
Regardless if a cord is damaged by age, heavy use, pinching, or bearing too much weight (when an appliance is hung by its cord), a damaged cord increases the risk of electrical shock, fire, or electrocution, and should NOT be used. “The electric cord on your appliance contains a live wire that is securely insulated.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I need to replace the cord rewinder of my Nilfisk King series 500 vacuum cleaner, but I do not know how to open the device or where are the screws. Can you help me?
ANSWER : Http://www.youtube.com/watch?v=13krERCaP0U
Read Full Q/A … : Vacuums
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Vacuums
Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby’s are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,
ANSWER : You can get better prices from Goodvac.com
Read Full Q/A … : Vacuums
I own an Oreck 2310RS upright vacuum cleaner. The cord is too short for my needs. The cord I need is a two wire 25 to 30 foot cord. Where can I buy this vacuum cord and how do I connect it? Thanks, Don
ANSWER : You can buy one at a oreck store but i would tell you to use an extention cord
Read Full Q/A … : Vacuums
I have my vacume electrical cord tangled inside and disconnected (I can see the open end of the connection from the power cord collector wheel! I need to take the vacume apart so get access to the wire inside. I need to know if there is something else to open other than the 4 screws. Your help is highly appreciated in advance.
ANSWER : Since you did not provide a model number for your vacuum, it is difficult to provide any precise directions regarding disassembly.
.
.However, most vacuum cleaners are fairly straightforward machines, and as long as you unplug the unit before you attempt any maintenance, then you should not have any trouble with the repair.
.
.Just be sure to keep track of all the screws you remove, and if different sizes are used in different parts of the vacuum, keep them separated and labelled so you can reinstall them in the correct places later.
.
.If the unit has a cover over the collection bag compartment, be sure to remove the cover and the bag to check for additional screws in that compartment.
.
.Other than that, just remove the visible screws holding the cover in place and then carefully remove the cover. If you need to reconnect the power supply wires from the cord to the vacuum, you may need to use a soldering iron, depending on how they are connected.
.
.Please comment back here to this page if you have any questions, wish to provide the model number for your unit, or just require further general assistance and I will respond as soon as I see it here.
.
.If this was at all helpful please click on the 4 Thumbs Up helpfulness rating icon you see on this page.
.
.Thank you very much and good luck.
.
.Joe.
.
.However, most vacuum cleaners are fairly straightforward machines, and as long as you unplug the unit before you attempt any maintenance, then you should not have any trouble with the repair.
.
.Just be sure to keep track of all the screws you remove, and if different sizes are used in different parts of the vacuum, keep them separated and labelled so you can reinstall them in the correct places later.
.
.If the unit has a cover over the collection bag compartment, be sure to remove the cover and the bag to check for additional screws in that compartment.
.
.Other than that, just remove the visible screws holding the cover in place and then carefully remove the cover. If you need to reconnect the power supply wires from the cord to the vacuum, you may need to use a soldering iron, depending on how they are connected.
.
.Please comment back here to this page if you have any questions, wish to provide the model number for your unit, or just require further general assistance and I will respond as soon as I see it here.
.
.If this was at all helpful please click on the 4 Thumbs Up helpfulness rating icon you see on this page.
.
.Thank you very much and good luck.
.
.Joe.
Read Full Q/A … : Vacuums
I have a d4c rainbow vacuum, need help replacing the electrical cord
ANSWER : You have to splice them. .Use crimp-on wire connectors (best), or threaded twist-on wire connectors. Do NOT just twist wire strands together and tape wires without using wire connectors . . . that is a NO-NO.
Read Full Q/A … : Vacuums
Hot cord the cord on my vacuum cleaner has been getting very hot the heat is from one end to the other incuding the plug and also where the cord exits the back of the canister please help I love this vacuum cleaner it has been faithful to me for over 15 years!
ANSWER : Likely after all these years that the motor is starting to go bad and draw more amps thasn it should. a new motor at a vac dealer is your best bet. it was likely made by panasonic, so a new panasonic is your best bet, and less $$$than the kenmore for the same vacuum. sears parts are extremely expensive
Read Full Q/A … : Vacuums
I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
Read Full Q/A … : Vacuums
