Bissell 1631 PowerSteamer ProHeat Canister Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The ProHeat® carpet deep cleaner is an Advanced Deep Cleaning System with Triple Action Advanced Brushes to scrub, clean and groom carpet. The built-in heater continuously heats hot tap water to maximize cleaning effectiveness. Remove deep down dirt. 6 Rows of cleaning.
Can I use cleaning formulas other than the BISSELL brand? It`s possible to use others, but we recommend against it. Our formulas contain no dyes, phosphates or optical brighteners, and will produce optimal cleaning performance when used in combination with BISSELL carpet cleaning machines.
Model Number

It`s usually on the lower back or bottom of the machine (for Lift-Off® models, remove the Lift-Off pod to find label) or behind the cleaning tanks. On cleaning formulas the model number is actually called an item number. Look for it on the back of the bottle or can, near the bottom.

Our best overall pick is the Bissell PowerFresh Steam Mop. There`s a lot to love about this steam mop, including the fact it comes with two microfiber pads for different types of messes and that you won`t have to wait long for the steam to heat up.
BISSELL is an American manufacturer of vacuum cleaners and floor care appliances.
Bissell Inc., also known as Bissell Homecare, is an American privately owned vacuum cleaner and floor care product manufacturing corporation headquartered in Walker, Michigan in Greater Grand Rapids.
Bissell Proheat Deep Cleaner

It features a patented hot water heater that provides maximum steam cleaning effectiveness via continuously heated cleaning action. The unit`s 12 amp cleaning system is quite powerful, removing tough and ground in dirt and stains from carpeting, upholstery, and other fabrics.

This machine uses HeatWave Technology™ which helps maintain consistent water temperature throughout the cleaning process by redirecting the heat of the motor to help maintain the temperature of the water.
No, please only use BISSELL formula or water depending on what machine you have. Never put descaling, alcoholic, or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
Laundry Detergents aren`t Formulated for Carpet Cleaning

Of course not! Cleaning solutions are specifically formulated to clean and not damage the machines they`re used in and the material they`re treating. Laundry soap is designed to be used in washing machines to clean clothing.

An upright vacuum cleaner should be around 100 air watts and a cylinder vacuum cleaner needs to be about 220 air watts.
Which is better at removing stains and mopping spills? Our testing has found that all steam mops remove stains fairly well, with marginal differences, and are likely slightly better than a regular mop and bucket due to the heat and vapour produced by the steam.
When choosing between steam cleaning and shampooing your carpet, you really can`t go wrong with both, but steam cleaning would be the better option. It removes more unseen pests and dirt, and can handle heavy-duty cleaning without making you wait long for drying.
The first vacuum-cleaning device to be portable and marketed at the domestic market was built in 1905 by Walter Griffiths, a manufacturer in Birmingham, England.
Bissell Pet Stain Eraser PowerBrush Plus

Those are the times when a lightweight portable carpet cleaner is a practical solution. In our most recent test of this category, this Bissell model was our best overall winner for stain and odor removal, sound, run time and more, outperforming the larger models we tested.

Our global headquarters is in Walker, Michigan. BISSELL also has locations in Bentonville, AR, Charlotte, NC, Chicago, IL, Grand Rapids, MI, and Pharr, TX. We also have offices in Mississauga, Ontario and in Reynosa, Mexico.
The BISSELL performs better on all surface types, and it has an alternative configuration for cleaning harder-to-reach places. However, the Hoover has better storing capabilities, a longer range, and virtually no recurring costs. It`s also significantly easier to maintain.
In 1876, Melville R. Bissell and his wife, Anna, were running a small crockery shop in Grand Rapids, Michigan. Sick of constantly cleaning sawdust off the shop`s carpet, Melville invented and patented a one-of-a-kind sweeper.
So, you`ve decided to buy a Bissell Power Steam Pro Carpet Cleaner and are wondering what other cleaning solutions you can use in it. Well, you can use Baking soda, Vinegar, Castile soap, or even Warm Water. However, you must keep in mind that you should leave the carpets to dry after you use them.
A: Yes, it can be used on several types of hard floors. It mentions tile, linoleum, and laminate in the manual.
These filters can be hand washed in warm water. A mild detergent may also be used. Close the lid and return the tank back to the vacuum. Press firmly until you hear a “click”.
Just empty the water out of the tank after each use. Doing so will prevent leaking and extend the life of your filter.
You can use just water as that`s the main ingredient but, anything other than Bissell cleaner voids the warranty. Sorry, there was a problem. Please try again later. Sorry, there was a problem.
Mix equal parts hot water and vinegar and pour in your carpet cleaner`s reservoir tank. Clean your carpets as per your cleaner`s instructions. Yes, vinegar might leave a temporary pickle smell in your home but it dissipates and disappears as your carpets dry.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Hello,

I am looking for a wiring diagram to install a touch/dimmer switch by “Comfort” mdl # RH-934B – Darjung Ind Ltd.
It has a standard lampcord (two wires) coming from it as well as one white, one black and one yellow wire.
The original touch/dimmer switch (no identification on it) had one white, one black, one red and one yellow – no lampcord.

Thank you very much for your help!

ANSWER : The black and the white will go to the lamp ,eg,output.The yellow is the sensor wire which should be firmly attached to the metal base of the lamp

I am looking for a Hoover Steam Vac Bare Floor Attachment, Part #90001331. I found one in the US for $8.95 but by the time I paid shipping and handling it would cost $91.77, a little ridiculous. I am looking for one in Canada. Can you help. I have heard Hoover has been bought out and parts are very difficult to purchase. I bought this 1 month ago and I’m sorry I didn’t know this prior to purchasing.
ANSWER : Hoover Bare Floor Attachment F5XXX from Usavacuum.com

It is $6.99 and shipping should cost you less than $10 for first class international to Canada.

http://www.usavacuum.com/F5900-s/139.htm

I have a 350E memory craft and I would like to know how to register a new USB or PC Card so I can use the pattern. Also would like to know how I can download patterns on to my Laptop.

Thank you.

ANSWER : Welcome to FixYa!.
...First you need to format the USB..Important: You memory stick USB is less than 1 GB. (The one that came in the package)..

    .

  • Put the USB stick ito your machine and using the set key,
  • .

  • Page through using the bottom arrow key – you will come to format ( this is also in your manual )
  • .

  • Select the USB memory stick – and wait until it formats, this could take 1 – 5 minutes.
  • .

  • Once formatted, you can copy the designs from the computer to the memory stick.
  • .

  • Put your free embroidery designs (example Winnie Pooh free embroidery logo) in the EMB5folder and they should show up on your Janome 350E.

.Note: If you see the EmbF5 then it has already been formatted by the Janome. ..

    .

  • Go back to your computer and click on that folder.
  • .

  • You will see ANOTHER sub-folder called Design (or My Designs, or something similar).
  • .

  • That is where you will need to copy over your embroidery files.
  • .

  • Then put the USB back into the Janome 350E sewing-embroidery machine and and they should show up.
  • .

  • Don’t put more than 6 designs on the USB at any one time or it will take forever to load.
  • .

  • If you don’t see the one that you want, then hit the “next page” icon on the Janome screen.
  • .

  • Make sure the USB stick isn’t too large, otherwise it will not be recognized or shows a poor performance.

.Important: Don’t copy more than 100 designs in one folder..
.The video below shows how to use the PC Card and USB in your sewing machine..Start at 4:15 (4 minutes and 15 secs.).
.
..To download Designs, go to http://www.needlework.ru/.It will require you to register and sign in..
.Thank you for using FixYa..Have a great day..Jas247

Filter I bought this Hoover a few years ago– just now about to use it first time. I cannot find my user’s manual and don’t know how to change the filter– or to clean it or whatever I am supposed to do with it. Also, there is a handle on one side of the unit that seems to be attached to an empty chamber or canister kind of thing. It looks like it should pull out, but it does not budge. I really would like to have a manual, but can’t seem to find one. Is there a similar model that is still
ANSWER : This is not for the exact same model, but should help you out:
.http://edge.maytag.com/epipubs/56511B47.PDF

I have had my Fantom Lightning vacuum for about 12 years and the power head motor has burnt out. I would like to know how to purchase a new power head as I just love my Fantom. How much are they and can I still buy one?
ANSWER : There are no parts
.you can try and find used one
.if your in my area i have a used one in stock

I would like to know where i can get a manual for the bissel 3760-4 model. i bought this used and i would like a book on parts i might need down the line. thank you.
ANSWER : BISSELL User’s Guides can be downloaded at www.bissell.com
.On the front page under Customer Service click on User’s Guides and enter the model number of your unit.
.User Guide will be displayed as a PDF file.

Owner/user manual Before my sister died she gave me the little grren machine model 1425 turbo brush with heat. That is all I know about it as she did not find the manual and now no one knows where it is and I really want to get it working and learn about it, as I know she loved it. so I really need a manual. thank any one that can tell me if it is on line or something.

I need to change out the short hose on the underside of my older Dyson DC 07 Animal (Light Purple). It is the one less than a foot long on the underside which is attached on one end to the main body of the vacuum(I was able to remove this one) and the top of the upper soleplate. The latter one seems to be glued or otherwise permanently attached.Any assistance you could give me on this would be greatly appreciated….Thanks
ANSWER : Hello Cynthia,
.
.It’s not glued, but it can be a little difficult to remove. You need to twist and pull at the same time and it should pull off. If it’s being stubborn, squirt a little bit of WD40 / penetrating fluid where the hose meets the tube on the sole plate, leave it for a couple of minutes and try again. This will also help you to attach the new one more easily. Wipe up any excess fluid after fitting the new hose.
.
.There isn’t really much more I can tell you. There are numerous videos on YouTube covering Dyson maintenance. The following is actually for a clutch change but it’s one of the easiest to follow and covers removal of the short hose:
.
.http://www.youtube.com/watch?v=ycicf5Ut59g
.
.If you fast-forward the video to 1 minute 30 seconds, you will jump straight to the part showing the removal of the hose.
.
.Hope this helps, please let me know if you need further assistance, by clicking on ‘Add a Comment‘ below your question.
.
.Regards,
.BElectric