Vacuums\015 I have misplaced the instructions for Little Yello Steam Cleaner, does anyone know were I could get PDF copy of this?..Thank u x\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
How Steam Cleaners Work. Water is heated past the boiling point and forced out as pressurized steam through a nozzle, brush, or other attachment. The vapor loosens dirt and kills dust mites, mold, staph, and other allergens and harmful bacteria. No suction is required, since the high-heat moisture dries quickly.
Soak and Clean the Nozzle: Submerge the nozzle in the warm vinegar and allow it to soak for at least eight hours or overnight. Remove the nozzle and rinse well with warm water. Use a toothpick to gently remove any deposits from each nozzle. Rinse again and dry with a towel.
Only Use Water in the Reservoir With the exception of a few models that have dual functions, steam mops are typically designed to be used with water and nothing else. The steam alone does a great job of cleaning the floor. Always read the manual on your mop model thoroughly for complete use guidelines.
Fill the steam cleaner with hot water.
Only put as much water as the machine directs so that you don`t overfill the water tank.
Fill the water tank on your steam cleaner, and allow time to heat-up time. Your cleaner may have an indicator light to let you know when it`s ready, or you may just have to wait a few minutes.
Heating Element. A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.
Vacuum cleaners use an electric motor that spins a fan, sucking in air – and any small particles caught up in it – and pushing it out the other side, into a bag or a canister, to create the negative pressure.
Most steam cleaners are designed to be used without detergent, so stick to water only with these. Some models, on the other hand, can be used with detergent – follow the manufacturer`s instructions.
Only Use Water in the Reservoir With the exception of a few models that have dual functions, steam mops are typically designed to be used with water and nothing else. The steam alone does a great job of cleaning the floor. Always read the manual on your mop model thoroughly for complete use guidelines.
Most steam cleaners are designed to be used without detergent, so stick to water only with these. Some models, on the other hand, can be used with detergent – follow the manufacturer`s instructions.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Instruction manual for Little Yello Steam Cleaner
ANSWER : What brand name is the model BISSELLL/ SHARK/HOOVER/?
I have a Hoover SteamVac SpinScrub with Clean Surge Carpet Cleaner. I loaned the cleaner to my son, who lives 3 hours away from me. My son returned the Steam Cleaner to me on Easter Sunday. My son failed to return the Owner’s Manual. I need to clean my ottoman. I have never used the upholstery & stair cleaning tool. Would you be able to e-mail me the instructions for this chore? My e-mail address is:
[email protected]. My name is Kay. Thank you!
ANSWER : Hi,
I would be glad to send that. But, you never Mention the Model Number and there are Various Models introduced by Hoover.
Let me know the Manual and within Few Minutes, i would be able to send you one more email which would have the Manual Details.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ‘ Fixya ‘ and have a nice day!!
Turbine Hi I found out through your site that my turbin is bad on my steam vac and I found some information as well on how to disasemble the steam vac to get to the turbine but still was wondering if there were some more detailed instructions on how to remove the turbin. I am a sigle mom and doing the work on the steam vac myself and need a little more detailed instructions. Please help asap and have a bless day.
ANSWER : There are some screws on the bottom that have to come out so you can remove the top housing. Take the brush block out, there are 2 screws above where it sits. The turbine sits near the front, and in the mid section, 2 screws on the front of it and 2 long screws from underneath, if you already haven’t removed them. Unhook the hoses to it thenpick it out and replace with the new one. ( Some models near the back of the housing, is a catch on each side that you have to unhook to release the top).
No steam My SV1000 steam cleaner will not make steam. It heats up, but I think the small portholes where the steam comes out are clogged up. Are parts available to change the steam line?
ANSWER : I used the straw to prime the lines and 50/50 mix of vinager and water and it worked perfectly. I then mixed the water container with the same mix and ran it through the system. All works fine now.
Steaming very little. The mop used to have strong bursts of steam, but now will steam very little. I use distilled water in the tank. Should I clean it with vinegar and water?
ANSWER : Hi,
It will not hurt it to try and clean it…
Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…
Euro-Pro Shark Steam Mop Problem
Here also is a link to get any of the Shark Manuals that you need.
heatman101
Operating manual i have lost my operating manual for my bissell Model #9500 proheat x2 cleaner. where can i get another manual? on one of the sites it shows that i can download the manual but for some reason i can not down load it. can you please help me with this problem?
ANSWER : BISSELL User’s Guides can be downloaded at www.bissell.com
.On the front page under Customer Service click on User’s Guides and enter the model number of your unit.
.User Guide will be displayed as a PDF file.
Instruction manual for 8910 proheat cleaner
ANSWER : Hi,
Please click
HERE to download instruction manual copy of 8910 Proheat Cleaner.
Hit “add a comment” button for further query / info.
Thanks.
For some reason, our shark steam mop stop working. Usually after I plug the steam mop, the power light would light up then you would hear & see steam coming out of the mop’s head but all of
ANSWER : HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL “SHARK 3” MUCH BETTER
