Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum\015 Hello experts,..I have problem with my windtunnel vacuum, first it full then replace the new bag. The problem i have now it does not ****. The motor work okay and full indicator show full.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The most common cause of loss of suction is that the filters have become blocked. They may require cleaning or replacing. Another cause could be that the vacuum cleaner hose is blocked.
Blockages or dirty filters may cause this to happen, the safety cut off will activate and switch off the electrical supply. If the cleaner has cut out, simply unplug and check for a blockage or dirty filters.
If the vacuum does not stand on its own, the vacuum`s latch may be broken. Call customer service to inquire about latch replacement options. When you buy the vacuum you have a 5-year warranty, so broken pieces are easily replaceable. You can purchase replacement parts either on Amazon.com or on Shark`s website.
`Tripped` reset systems are the most common reasons for a brushbar not turning, but there are some other less common reasons too. These include: If the bearings on the end of the brushbar have seized, you won`t be able to turn it at all. This will often result in a broken belt as well, so be aware of this.
If your vacuum cleaner has lost suction power, it`s time to empty the container. Vacuum cleaners come with various foam or mesh filters. These might get clogged over time if not cleaned or replaced properly. This will cause your vacuum to lose suction.
If all you hear from the vacuum unit is a click at the when you try to start the vacuum motor from inside the house, then the motor in the unit is dead and has to be replaced. A strong odor from the shellac, which coats the copper coil windings, is an indicator that the motor is about to or has burnt out.
First, How long should you expect a vacuum cleaner to last? On average, According to Consumer Reports, vacuum cleaners last a median of eight years. But the lifespan varies wildly by not only brand but your own personal use. This should be expected.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
One of the easiest ways to increase vacuum cleaner suction is to empty the dust bag or container. Dust containers need to have enough space for airflow, otherwise, they could get clogged and have less suction power. Regularly check your dust compartment and empty or change it when it`s already 70-80% full.
The robot might experience issues returning to its dock if it was started in a different location, if it is hitting an obstacle, or if it was moved manually. If this is occurring, try one of the below solutions: Move the dock to a new location and see if the robot can locate it.
If you checked your brush roll, floor setting, and belt but your brush roll is still not spinning, that means you probably need a Shark micro switch replacement. This small switch tells the vacuums brush when to start spinning.
Dust and dirt are drawn up via either a brush or another appropriate nozzle through the pipe/hose and into the dust collector. This process is powered by the suction motor and all air is filtered through the exhaust filter to keep debris in the vacuum, while expelling only clean air.
The roller brush is the combination of a belt, a roller, and sometimes a small vacuum head motor. The roller spins, and the bristles attached to it sweep up debris that then gets sucked into the dirt container of the vacuum. The brush head also helps to pull dirt and debris out of carpets of various pile heights.
After a year or so, you may need to replace your vacuum`s beater brush. If the bristles seem to be squished, broken or are varying heights, it`s time to replace the brush. These can be found online with the vacuum`s brand and model of your vacuum cleaner.
Inspecting the Vacuum Commutator for Motor Brush Problems

Test that by turning the motor off and pushing on the center shaft, the armature. If it has any play, besides spinning, then replace the motor. If solid then replace the brushes – motor brush replacement instructions.

The two main indicators to determine vacuum power performance are water lift and airflow. The water lift is measured in mmH2O, mbar or kPa. It represents the suction force and is the reference parameter for vacuuming liquids and heavy materials. The airflow is measured in m3/h or in l/s.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
The most common problem with a vacuum cleaner is also the easiest to remedy: clogs in the hose or attachments. Also the electrical cord, motor, switch, fan, brushes, and motor bearings can all need repair or replacement. The drive belt may need replacing; and the attachments, hoses, and filters may need unclogging.
Acute exposure to the vacuum of space: No, you won`t freeze (or explode) One common misconception is that outer space is cold, but in truth, space itself has no temperature. In thermodynamic terms, temperature is a function of heat energy in a given amount of matter, and space by definition has no mass.
Problems can occur when overused or clogged filters cause the vacuum motor to overheat. This not only shortens the motor life but causes a loss of suction. In some cases, total motor burn out can occur.
The temperature of an object is usually defined as the average kinetic energy of its constituent particles, and since a vacuum has no constituents its temperature would be zero under this definition.
The bottom line. Many vacuum brands recommend changing the bag before it becomes full, at least every three months. The purpose of changing the vacuum bag when you need to is so that your vacuum cleaner is working at an optimal level.
It places in three of our lists: Best Vacuum Cleaners of 2023 (No. 9), Best Cordless Vacuum Cleaners of 2023 (No. 4), and Best Vacuum Cleaners for Pet Hair of 2023 (No. 9).
Vacuum is a negative gauge pressure, usually referenced to the existing standard barometric pressure where the equipment will operate. This means vacuum is a differential reading between the surrounding atmospheric pressure and the pressure in the system evacuated.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue