iRobot Roomba 4210 Bagless Robotic Vacuum\015 It just won’t work. battery ok but it won’t come on\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If your Roomba® i Series Robot Vacuum is not turning on or is not able to charge, rebooting your robot tends to solve most related issues. To reboot your Roomba: Press and hold the CLEAN button for 20 seconds. After you release the button, the light ring will show a white clockwise swirl while it reboots.
Charging contacts. Dirt or built-up debris may be preventing your robot from charging. Please unplug the base and grab a clean, lightly dampened melamine foam, such as a Magic Eraser to clean the contacts on the robot and base.
You can easily check the status of the battery in the iRobot® HOME App. A battery icon will be displayed in the top-right corner, indicating the current status of the battery.
What should I do if the remote control doesn`t work? – Replace the batteries in the remote control. – Make sure the main power switch on the bottom of RoboVac is in the “I” position. – Make sure RoboVac is fully charged.
With proper care, your robot`s battery should last at least 2-3 years before it needs to be replaced. Here are some battery maintenance tips to extend battery life and keep Roomba® cleaning at peak performance: Only use iRobot® batteries.
Factory reset on a Wi-Fi Connected Roomba® and Braava jet®

e Series Robots: Press and Hold the Home and Spot Clean and CLEAN button down for 20 seconds then release. 900 Series Robots: Press and Hold the Dock and Spot Clean and CLEAN button down until all LEDs illuminate.

If your Braava jet® m Series Robot Mop will not charge, it`s very likely the power cord is not fully inserted into the Home Base®. First, confirm that the outlet is working, by plugging in another device such as a lamp and confirm it works. If it does not work, move the Home Base® to a known working outlet.
If you get a more affordable model, like Roomba 675 you can expect a lifespan of up to two years. Go to the higher-end, like the iRobot j7+, and our research and testing suggest you can get five years plus of cleaning with proper maintenance.
If you still have a run time of 10-15 minutes, we suggest you to purchase a new battery. Batteries are covered by a 6-month warranty, they should last between 1 to 2 years. Can`t anyone give a better answer to `how long does the standard roomba battery last?
Check whether you need a fresh pair of batteries. Perform a Power reset: Un-plug the TV power cord for 60 secs (or 2 minutes for Android TVs) and plug back in. Alternatively, for Android TVs perform a reset by holding down the power button on the remote control for 5 seconds. Perform a TV software update.
It may take up to a minute and a half for your robot to reboot. The reboot procedure is complete when the light ring shuts off. Note: For 600 series robots, see below. Note: A robot reset will reset the clock of a non-connected robot.
Roomba is a user-friendly model. You can run your Roomba without an app by using the “CLEAN” button to start, pause or resume your cleaning job.
Improved Cleaning Performance: A Roomba with a second battery will have double the running time, allowing it to cover a wider area and pick up more dirt. 2. Better Battery Life: By sharing the workload between two batteries, the life of each battery is extended.
Unplug your router for ten seconds, then plug it back in. Wait two minutes for the router to boot up again. Then see if the connection can be established. If you have confirmed all of the above and are still unable to connect your robot, please contact iRobot Customer Care.
iRobot Roomba vacuums can operate even with simple ambient light, but not in total darkness. What may help with either the i7 or s9 robots is to run a training mission and/or clean your floors with the closet light on until your floor plan map is complete.
You can put the RoboVac on the charging base/auto-empty station though it`s fully charged. The battery protection circuit prevents the battery from being overcharged. Once the RoboVac is fully charged, it will stop drawing power. In this way, the vacuum can always be ready and cleaned on schedule daily.
If your RoboVac has been used for more than one year, it may be time to replace the battery. Replacing the battery usually fixes this specific issue. You can purchase a new battery to replace the existing battery.
Charging time under normal conditions is at least 2 hours. For best results, use only the battery type compatible with your robot and ensure that it is an authentic iRobot Lithium Ion/NiMH battery that comes with Roomba or purchased from iRobot authorized dealers.
If the red light ring around the CLEAN button is pulsing, the Roomba i Series battery charge is too law to start cleaning.
Your charging cable could be loose, unplugged, or damaged. Your charging cable could have a weak connection because it wasn`t made by your laptop`s manufacturer. Your charging ports could be clogged with dirt or debris that is keeping it from powering up properly.
Clean the dock`s charing contacts

If the contacts get too dirty, the vacuum will have a tough time getting a solid charging connection, and it may be unable to dock as a result. The best way to clean the Roomba`s charging contacts is with a damp melamine foam, like Mr. Clean`s Magic Eraser.

Error three (3) means your j series robot is on an obstacle or an uneven surface and the Right Wheel is stuck. If this is the case, lift your Roomba® off the floor, place it in the center of the room, and restart the clean cycle. If this error occurred on a flat surface, check the Right Wheel for obstructions.
Most owners believe that running their robot vacuums four times per week is sufficient to keep the floors dust-free. However, if you have children or pets, you should use your robot vacuum more frequently. Daily vacuuming is recommended if you suffer from seasonal allergies.
In 1996, Electrolux introduced the first robotic vacuum cleaner, the Electrolux Trilobite. It worked well but had frequent problems with colliding with objects and stopping short of walls and other objects, as well as leaving small areas not cleaned.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I purchased a brand new P113 Ryobi charger about 2 years ago. It has never worked. If I put a P104 battery in for a charge, it looks like it works correctly. I push the battery tester on the battery itself, and it says full charge, but when I go to use the bateery, it dies right away. I have tried three new P104 batteries. The batteries charge on my charger at work with no problem. The funny thing is, I don't need a battery in the charger and the charger does the same thing, It runs the test
ANSWER : If you have your receipt, check with Ryobi to see if it is still under warranty. It comes with either a 2 or 3 year warranty, depending on when it was purchased. If it is still covered, get it replaced/repaired. If it is not, buy the P117 charger. $30 at Home Depot. It has a 90 day satisfaction guarantee. If it charges your batteries properly, you’re good. If not, bring it back if you don’t like/want it. My P113 won’t get out of test mode now, or charge Lithium batteries anymore. So I bought the P117 yesterday. Works great, and it’s a lot cheaper than new batteries! And it has a 3 year warranty.

It just won’t work. battery ok but it won’t come
ANSWER : Debbie,
These models are notorious for dirt getting into the buttons on the top and then the switches no longer work.
It’s not a terribly tough job to replace the button circuit board and replacement parts are available.

Tyler

Battery charge I just purchased a new battery pack insert for my Roomba, Replacement
was a breeze and it now works great. My question is; The last battery I
bought ( not from you) was a full cased roomba battery pack that didn’t
last a year. Roomba says leave the r Roomba charging all the time so
it’s ready when you need it, and that’s nice but I feel that leaving it
charging like that it will kill the battery faster as it is always warm
to the touch. These battery’s should last at least 5
ANSWER : Dave you are correct. You should never over-charge anything like a Roomba, Cel Phone, etc. That will kill a bettery very quickly.

We have an Emerson hands-free soap dispenser that won’t work. We’ve installed brand new batteries and it still won’t dispense soap. The red light comes on to indicate it’ s working
but no soap will come out.
ANSWER : We have 5 Emerson hands-free soap dispensers that don’t work. Tried new batteries, light comes on, but no soap comes out. How can we get our money back?

I have iRobot Roomba 4210 and I have a problem with charge battery. The battery is new. When I charging a battery in other iRobot Roomba the battery was full charged. When I charging in my iRobot Roomba the battery was empty. My fast charger is OK.
ANSWER : The charging circuit on the main board is fried. This is a common issue. You need some good electronic repair skills, and equipment, to replace the problem components

I have the smaller oreck portable hand vaccuum & it won’t turn on. It was working fine in the one bathroom & I moved to the other & bathroom & it won’t work or turn on at all?
ANSWER : Check the wall outlet has poser and make sure the plug is fully inserted.

Water is not being discharged. I have filled the reservoir that holds the carpet cleaner fluid And I have filled the water container. I know how to use the cleaner, it has always worked, But now, no water is being discharged to the carpet. I turn it on, squeeze the trigger, but nothing comes out. The wheel that is suppose to spin (to indicate that water is being discharged) is not spinning. Everything else works. I.e. the suction works, and the hand held accessories work.
ANSWER : That means that the pump belt is worn and it needs to be replaced. You can get a replacement belt and view the manual here:

Bissell Pump Belt

How can I get my DAB radio working again?
I have a Sony XDRS100CD with DAB radio. The DAB radio has stopped working although I can still use the CD and get FM radio. The unit has a readout on the front that usually shows the time and this stopped working too, presumably because it got the time via the DAB radio.
The unit works from mains and batteries although I have only ever used it on mains.
ANSWER : I have the same problem… did you ever get a fix..
[email protected]