Karcher DE4002 Steam Vacuum\015 I’ve been using it regularly and now I can’t get the cap off. It just goes round and round.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If the lock is stuck and the cap turns freely even when there is no pressure you will need to break off the cap from the valve. Either using a flat blade screwdriver, carefully prise the cap away from the base – or carefully strike the cap a `glancing blow` to fracture its base and lift off the cap.
STEP 1: Position the steam cleaner on a flat, stable surface. STEP 2: Remove the water tank cap by twisting it in an anticlockwise direction. STEP 3: Fill the measuring jug with cold water.
Note the nozzle tip that is attached to the stem of your Karcher pressure washer. Look for the spring-loaded collar just below the tip. Pull the spring loaded collar away from the nozzle tip and with your other hand pull the nozzle tip off the stem. It should come off in one motion.
Heating Element. A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.
The spray tip may be clogged. Use a paperclip and insert it into the spray tip to remove a clog. Now plug back in, making sure you are using a working outlet. You will know, as the Ready light will begin to blink when plugged in.
Fill With Vinegar: Fill the reservoir with distilled white vinegar or cleaning vinegar. Heat and Expel the Vinegar: Plug in the steamer and use the highest heat setting. When the steamer is heated, expel the vinegar into a sink or bucket until no more steam escapes. Stay away from the steam to avoid burns.
A lid is necessary to ensure the efficient steaming process. Each set of steamer should have its own lid.
At the bottom of the Karcher K2 Basic, lift the light gray hose clip that holds the flexible hose. Then pull the pipe to extract it.
In order to cover the various interfaces, from the highpressure cleaner to the nozzle, as well as forward and backward compatibility, a total of 8 different adaptors are available. This ensures that all existing machines and accessories can continue to be used together with the new machines and accessories with EASY!
Some steam cleaners come with descaling agents. In addition, there are a variety of descalers out there for use in steam cleaners, humidifiers, and other home appliances where water is vaporized. Whether you are using a descaler you purchased or making your own from simple baking soda and water, cleaning is the same.
The Steam Release Handle is Not Properly Seated

If you take the Instant Pot steam release valve or steam release handle out while cleaning the Instant Pot lid, it may not be put back correctly. It needs to be pushed in all the way. If it isn`t securely seated, steam will leak from the steam release handle or valve.

If your account has been locked, please login to your Steam account and click on the red Steam alert banner for more information and for the length of the restriction. The block may be related but is not limited to: The use of graphic or otherwise inappropriate avatars, screenshots, artwork etc. Spamming the community.
Check the water level in your tank to make sure that it contains no more than 3.78 litres maximum. Overfilling the water tank can prevent your steamer from working properly. When steaming in a low position you should periodically raise and straighten out your hose.
The spray tip may be clogged. Use a paperclip and insert it into the spray tip to remove a clog. Now plug back in, making sure you are using a working outlet. You will know, as the Ready light will begin to blink when plugged in.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I have a Bissell Proheat 2XTurbo carpet cleaner. No water will come out when I squeeze the trigger. I have filled the solution tank and the water tank. I read the troubleshooting in the manual and have tried turning it off for a minute and restarting and nothing. I took out both tanks and reseated them and nothing. It has sat for over a year but did not have any water in the water tank. Some solution was left in the solution tank. How can I make the water come out? HELP!
ANSWER :

Call BISSELL Consumer Services.
.

1-800-237-7691
.

Mon-Fri: 8am to 10pm ET
.

Sat: 9am to 8pm ET

Read Full Q/A … : Karcher DE4002 Steam Vacuum

Karcher SC 1502 steam cleaner can’t get cap off water tank
ANSWER : Dear jrider784,
.I solved a problem like this on FIXYA, just a few months ago. I gave this solution. Try to fill the machine from somewhere else. You can do this from the outlet. If you manage to do this, put on the machine. ( now you know that when there is hot water in the machine, the tap goes round free for safety). Now as the water starts to cool down….start trying to see if you can unscrew it. My plan is that with the hot water, the safety will start to work again. If the cap does not release the safety on cooling, then there is no other way but to destroy the cap and replace with a new one. Very important to mention that this job must be done by a qualified technician or some one who knows what he is doing. Working with hot water is very dangerous.
.Regards,
.Fulltech.

Read Full Q/A … : Karcher DE4002 Steam Vacuum

The Hoover Steamvac Widepath will NOT pick up water. The dispenser with cleaner DOES have water. The TANK that would receive the dirty water is NOT full. All tanks are on properly and the machine will still not pick up the used water. I found a tear in the interior hose leading to the receiving tank and repaired throughly with electrical tape. Still will not pick up the water. Any suggestions?
ANSWER : Sounds like a clogged air path (no vacuum action) from the floor pick-up to the collection tank. Take the tanks off and deal with the vacuum problem alone. The collection tank should have a air exit vent–is it clear? Check the interior hose that you repaired–is it clogged? Remove the bottom plate and inspect the air path from it. Because this machine deals with water, clogs can become like concrete! Hope this helps!

Read Full Q/A … : Karcher DE4002 Steam Vacuum

Need instructions how to use Hoover Steam Vac Spin Scrub. I borrowed it from my Sister and she left it with no instruction book or letting me know how to operate it. I put water & cleaner in top tank. That’s all I know to do. Do I put any water in bottom tank? I figured not, since that is probably where the water goes when sucked up by vac. Do I leave lid on bottom tank? I usually use a commercial cleaner, and this is very different. I need to know NOW, as I must return it to her today, and I’m
ANSWER : I did have a solution in just a few minutes. Someone responded with a solution that gave me the website where I could go and print the manual in pdf, so did that, and checking instructions I was able to clean my carpets and get the shampooer back to my sister later the same day. I really appreciated your site and help I got for my problem. I found it on google. Thanks again!
.
.[email protected]

Read Full Q/A … : Karcher DE4002 Steam Vacuum

I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet
ANSWER : Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn’t blocked as well.

Read Full Q/A … : Karcher DE4002 Steam Vacuum

I have a Hoover Platinum carpet cleaner, and it has stopped dispensing cleaning agent and water. This model has a separate tank for water and separate tank for shampoo dispensing. It also has a power hand unit that dispenses shampoo. All along the hand unit has continued to dispense shampoo. Symptom #1, the water tank seemed to be taking on shampoo, as it was getting sudsy. Symptom #2 – On wash mode, nothing would come out, on Rinse mode, sudsy water would come out. Later, symptom #3 – not
ANSWER : Somewhere on the outlet is a control tap thats driven by a rubber band and something is up with this control ,best advice here is put it in the boot of the car and take iot to a hoover dealer ,they will do it seconds for you

Read Full Q/A … : Karcher DE4002 Steam Vacuum

Bissell ProHeat 2x Upright Carpet cleaner-water tank valve
ANSWER : Www.usavacuum.com/category-s/387.htm

You can find the parts you need here

Read Full Q/A … : Karcher DE4002 Steam Vacuum

I have a bissell quickwash 1950-e. I bought it Jan. 2006, and have only used it 8-10 times, I live in a very hard water area, so I though if I put some vinegar in with the cleaning solution it would get rid of any hard water deposits, unfortunatly the solution went lumpy in the tank and stoped spraying out water, I have opened it, hose clean, sprayer not blocked, x at bottom of water container when depresed water trickles out, component that opens the x when water container placed, also ran wate
ANSWER : Hard to say what is causing your problem, replacing the cap and insert on the water tank may help, part #2041111, even tho it may trickle out water when depressed, they can still be bad. The other thing would be the rod not relesing the water like it should. The big draw back to this model is Bissell has obsoleted all of its parts and most are no longer available. Might be wiser to buy new.

Read Full Q/A … : Karcher DE4002 Steam Vacuum