Vacuums

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

One caveat: Handling this vacuum`s 23 pounds takes some muscle. In our member survey, Kenmore canisters earned a very good score for predicted reliability and an average rating for owner satisfaction.
How long do Kenmore vacuums last? A. It`s suggested that the typical vacuum can last up to an average of eight years. With proper maintenance, a Kenmore vacuum could last that long or longer.
Vacuums: For the past decade, Kenmore`s flagship vacuums were made by Panasonic (less-expensive models came from TTI, Eureka, and PhoneMate). Now that Panasonic is winding down its North American small appliance business, upcoming Kenmore vacuums will be manufactured by a company called Cleva.
Kenmore is an American brand of household appliances owned and licensed by Transformco, an affiliate of ESL Investments. As of 2017, Kenmore products are produced by manufacturers including Whirlpool, Samsung, LG, Electrolux, Panasonic, Cleva North America, and Winia Electronics.
Kenmore is a recognized brand in the appliance industry and has been around over 100 years. Kenmore offers high-quality refrigerators in a wide range of sizes and models at affordable prices. Variety: Kenmore offers a huge selection of appliances, from mini-refrigerators to giant, commercial appliances.
Over time and extended use, a very fine layer of particles will start to line the inside of a vacuum bag, remaining in place even after the bag is emptied. This means that the bag will lose the proper airflow required to let the incoming air escape. As the airflow is restricted, the suction dies down too.
Kenmore. The Kenmore Appliances brand is owned by Sears but manufactured by various appliance makers. The brand has a long history of over 100 years, having launched in 1913 originally on sewing machines.
Miele (/ˈmiːlə/ MEE-EH-lə; German: [ˈmiːlə]) is a German manufacturer of high-end domestic appliances and commercial equipment, headquartered in Gütersloh, Ostwestfalen-Lippe. The company was founded in 1899 by Carl Miele and Reinhard Zinkann, and has always been a family-owned and family-run company.
Check service panel for tripped breakers/blown fuses. If breaker is tripped, reset it. If fuse is blown, replace it. If vacuum cleaner is plugged in, be sure power button is in the off position before resetting breaker/changing fuse.
Most refrigerators, ovens, microwaves, and dishwashers have the model number inside the door. Open your doors, and look around the door frame. Many times the appliance model number will be on a plate against the frame.
The details about your model and serial number can be found on a sticker on the underside of the vacuum. The serial number is printed on the label on the right side of the unit. The serial number is located on the outer right side of the unit.
Most refrigerators, ovens, microwaves, and dishwashers have the model number inside the door. Open your doors, and look around the door frame. Many times the appliance model number will be on a plate against the frame.
Kenmore model numbers typically include a three-digit prefix followed by a dot and a series of numbers that represent the specific appliance model. The prefix can help identify the manufacturer of the appliance. Here are some common prefixes and the manufacturers they represent: 110, 106, 562: Whirlpool.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Read Full Q/A … : Vacuums

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

Read Full Q/A … : Vacuums

The original belt on my upright Kenmore Progressive broke and I replaced it with the spare that was in the vacuum. The vacuum and spare belt are about 10 years old. Then the spare broke after one vacuuming session and there was a burning smell coming from the vacuum. I ordered new belts and replaced it with the new belt. It seems to be working fine with no smell. I checked the belt after I vacuumed the family room and although it was in tact, the belt was very hot. Is that normal? Should t
ANSWER : The belt heats up due to the friction, as well as being in contact with the shaft of a hot motor. It is normal.

Read Full Q/A … : Vacuums

I have a Kenmore canister vacuum – model 25614506. Some time ago, I was not able to turn the vacuum off with the on/off switch, but could still use the vacuum. Turned if off/on by pulling the plug. The other day when I went to plug it in, I heard a pop. Now the sweeper runs but the vacuum cleaner does not **** – no air flow. What could be the problem. The cleaner is only 4 years old.
ANSWER : The motor has an inline fuse

Read Full Q/A … : Vacuums

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)

Read Full Q/A … : Vacuums

Kenmore Progressive canister model 116.27514700
Problem: Vacuum motor won’t turn on. The power head operates, but nothing from the vacuum. Have checked all areas of airflow: hose, bag, motor filter and hepa filter. All are fine. Have checked and rechecked all electrical connections, all seem to be in working order. Vacuum hasn’t run for a week or so, so it’s not the thermal protector, unless it’s defective. Vacuum was running fine last week. Didn’t stop operating when using. Went to v
ANSWER : Hello! The culprit is the PCB Assembly;
Part # KC86WBZR3000…Cost is $6.99. I would remove and inspect for burnt components, or broken wires…Then clean connections both male/female using an eraser, toothbrush and alcohol…Using a bright light and a magnifying glass inspect solder joints for “bridges” or cold joints. If you detect a problem during this procedure (to the exclusion of burnt components) fix, reassemble, and test. If problem still persist: Order a new part.

if you have any question feel free to send a comment.

Guru……………..saailer

Read Full Q/A … : Vacuums

I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci

Read Full Q/A … : Vacuums

Smoke coming out of my Kenmore Canister Vacuum Model 22550300C
ANSWER : Sounds like a motor err. Could be repaired by a professional but it never be as good as a new one. Also they you might not find anyone to repair it because the replacement motor might cost more than a new vacuum /considering it’s age the motor will be hard to find and that makes it more expensive to repair./

I suggest you to buy a new vacuum.

Read Full Q/A … : Vacuums