Kent Euroclean Euroclean Wd260 Wet Dry Hepa Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
Wet and Dry Vacuum Cleaners are powerful machines which, as the name suggests, can be used to vacuum up both liquids and solids. A little sturdier than your average vacuum cleaner, Wet/Dry machines can be used for a broader range of tasks, both inside and outside your home.
If dirt or other contaminants enters the vacuum pump chamber or valves, overall pump performance can be impacted. When pumps need more time to accomplish operations, they may be in danger of failing. At this point, thoroughly cleaning your pump and ensuring that no contaminants reach other parts is a necessity.
A wet dry vacuum cleaner has a revolving brush made of materials such as microfiber and nylon. This brush will take up any dry dirt on your floor while easily transitioning to scrubbing and mopping.
A wet and dry vacuum cleaner works in a similar way to a canister cleaner. The vacuum cleaner is ideal for picking up dry dust, and wet spills and is ideal for heavy-duty jobs. However, it comes with the added advantage of cleaning wet spills and damp patches.
The bristle guard separates hair from the brushroll until an integrated comb actively removes the hair from the bristles. Hair is sucked up into the dust cup, leaving the brushroll ready to deep-clean.
Wet dental vacuums (also referred to as wet-ring vacuum pumps) use water to create vacuum. Dry dental vacuums create that vacuum pressure by pumping dry air, using turbines or rotary vanes to create suction power.
Difference Between Wet Cleaning vs Dry Cleaning

The most important difference between wet cleaning and dry cleaning when it comes to professional cleaners is the use of non-water solvents in “dry” cleaning and the use of chemical-free water-based cleaning agents or solvents in “wet cleaning.”

When you vacuum water, you could damage your vacuum`s motor, risk electrocution, and make a huge mess. Unless your vacuum is a wet/dry vacuum rated for water, you should never vacuum water.
Vacuum cleaners work because of Bernoulli`s Principle, which states that as the speed of air increases, the pressure decreases. Air will always flow from a high-pressure area to a low-pressure area, to try to balance out the pressure.
If you notice that your vacuum pump is leaking oil, the seals are probably worn out and need replacing. Not only will that fix the leak problem, new seals will also allow the pump to maintain the appropriate oil levels, which in turn reduces the need for frequent changing.
If all you hear from the vacuum unit is a click at the when you try to start the vacuum motor from inside the house, then the motor in the unit is dead and has to be replaced. A strong odor from the shellac, which coats the copper coil windings, is an indicator that the motor is about to or has burnt out.
Connect a tachometer and vacuum gauge to a none regulated vacuum source on the engine. Disconnect and plug fuel vapor canister vacuum lines. Start engine and run the engine until it reaches normal operating temperature. Note the vacuum gauge reading and any variations in the pointer movement at idle and 2000 RPM.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
An easy way to test the operation of the check valve is to disconnect the hose from the brake booster with the engine off (See Image 2). If you hear a whooshing sound when you disconnect the hose, this is an indicator that the check valve is working.
If you have hard floors and want a time-saving, deep cleaning solution, a vacuum mop may be worth the investment. If you prefer a more eco-friendly, versatile, and budget-friendly option, a steam mop may be the way to go. Always check customer reviews and warranty information before making a final decision.
One of the biggest advantages of vacuum mop combos is their versatility. They are designed to work on different types of surfaces, including carpets, hardwood floors, tiles, and more. Some models even come with a wet mop vacuum feature, which means you can use them to clean up spills or stubborn stains.
Blockage – when a vacuum cleaner becomes unusually loud, it is normally because of a blockage of some sort. This is a problem that is easily solved by turning off the cleaner, check for blockages in the pipes, and remove them. You can also check and empty the canister to remove any possible blockages there as well.
Disadvantages are: a vacuum system must be maintained complete with vacuum pumps, filtration pumps and supplementary accessories. Vacuum filters cannot be used on filtrates that are volatile under standard conditions. Most vacuum filters cannot handle compressible solids that are difficult to filter.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.
ANSWER : .Vacuuming Liquids
.1. When picking up small amounts of liquid
.the filter may be left in place.
.2. When picking up large amounts of liquid
.we recommend that the filter be
.removed. If the filter is not removed, it
.will become saturated and misting
.may appear in the exhaust.
.3. After using the vac to pick up liquids,
.the filter must be dried to reduce the
.risk of possible mildew and damage to
.the filter.
.4. When the liquid in the drum reaches a
.predetermined level, the float mechanism
.will rise automatically to cut off
.airflow. When this happens, turn off
.the vac, unplug the power cord, and
.empty the drum. You will know that the
.float has risen because vac airflow
.ceases and the motor noise will
.become higher in pitch, due to
.increased motor speed.
.IMPORTANT: To reduce the risk of damage
.to the vac do not run motor with float
.in raised position

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum.
Can’t find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what
ANSWER : No – simply remove the filter. That is the only step necessary!!
.Hope your cleanup goes well!!
.Thanks for using FixYa – a FixYa rating is appreciated!!

I have a 5.5 hp craftsman 20 litre wet Dry vacum . I have lost the manual. & have 2 questions 1) how do I change to wet vacum from dry? Also could i use the wet mode with some water in it and let it run while I am sanding dry wall to catch the dust in the water in the container? Thanks
ANSWER : # 1 myou just take the bag out make sure ytou sponge filter is in place athe top and turn it on the power switch just turns on ,machine ther is no wet dry switch just an empty bagless cannister is all you need make sure the ball outlet in vacumn is working it stops water from overfilling cannister # 2 just use the proper bag and attachment to vacumn up the drywall dust a good building supply store has special sanding attachments for vacumn so you can sand and vacumn at the same time

I borrowed a Shop Vac Ultra plus wet dry vacuum to use as a dry vacuum. It needs emptying. How do I open it, and clean the filter? Thanks

Bad Motor I have purchased two of the Kenmore direct drive beltless systems with Progressive systems. The first died after a year, the vacuum motor start making a grinding noies. I pulled the side HEPA filter and could see a fine coating of graphite like dust. Took it to a vacuum repair shop. They said the brushes were going and thus the motor was shot. I liked the vacuum and bought a second, 1 year later the motor is making a slight noise that and removing the HEPA filter I find a slight metall
ANSWER : That dust is from the carbon brushes on the motor. You may need to check them, and also clean out the motor compartment. A slight noise could be a motor bearing starting to go. Does the smell like rubber or electrical. If rubber, then the belt has stretched and needs to replaced. If electrical, then something is causing the motor to run hot, like a clogged filter, or it could be a motor going bad.

I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.Hope this helps!!