Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Several things cause a burning smell, such as a motor part is that broken or worn out, the motor is running too hot, you suck up a burning cigarette, or the rubber belt has snapped. The belt helps turn the brush roller that helps guide dirt and debris into the vacuum.
A: The Dirt Devil Endura Express Bagless Compact Upright Vacuum Cleaner vacuum will fall within the decibel range of 75-82 dBs, which is industry standard for most vacuums.
If you`re smelling rubber, the belt has either burned out and snapped or the belt has become so stretched out that the roller is not moving and the vacuum belt is getting super heated from the motors RPM.
As the cleaner head and filter fills with dirt and debris over time, all the built-up debris begins to emit a burnt-smelling odour. You may need to remove and clean out the vacuum`s filter. We need to advise you to stop using your machine and request that you contact your local customer support team.
A strong odor from the shellac that coats the copper coil windings is an indicator that the motor is about to or has burnt out. If the motor is still running, even if it turns on and off by itself as it is heating and cooling, you can still run the motor until it gives up for good.
In many cases, the smoke you see is actually mechanical pump oil vapor. Many people tend to think that whenever there is smoke emitting from the pump, it means there is something wrong with the machine. But, oil vapor or oil mist is a natural by-product of creating vacuum in an oil sealed mechanical pump.
120 – 140 decibels: Such as, a rock concert, auto racing, or a hammer pounding a nail. 125 – 155 decibels: Like, firecrackers or fireworks, or a jet engine. 170 – 190 decibels: For example, a shot gun blast or a rocket lift off.
Living room music (76 dB); radio or TV-audio, vacuum cleaner (70 dB).
Belt is Broken or has Debris
The main reason why a vacuum may be emitting a smell of burning rubber is a broken belt or an object is suck. Excess hair or fur caught around the roller brush can also cause this issue. Turn off your vacuum and let it cool before doing anything.
Burning Plastic: The acrid odor of an electrical fire is often described as that of burning plastic.
If there is a strong burning smell coming from the motor area of your Dyson DC14 or DC07 then it is most likely that your motor has burnt out.
Within the first few uses it is normal to expect a smell from any brand new appliance with a heater element (e.g. toaster/oven/kettle etc.) The smell will fade with time and usage.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
The air intake pipeline of the brush accessories may be clogged, or the roller accessory may be blocked due to dirt build-up. If you keep using your vacuum while these parts are not fully functioning, there may be an unpleasant burning smell coming from your appliance. Clean these parts and remove any dirt build-up.
If you notice a burning rubber smell from cars, it is often a sign that you have overheated the brakes or tires. Overheating usually occurs when your car`s clutch is slipping or not working properly. If you experience this smell and were using your clutch at the time, let the car cool down, and try again.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Dirt Devil Jaguar Bagless Upright Burning Smell
ANSWER : Take the belt off again you will see burnt rubber from the old belt stuck to the motor shaft.you can take a fine piece of emery cloth and clean the shaft down to its polished finish.always good to do this after each belt.check the brush roller and see if there are any signsd of plastic melted.make sure it turns freely if not the brush roller might be siezing uo on youhave you cleaned the hepa filter?does it smell like wires burning or rubber.with it unlugged take it apart to the motor and take a fine iece of emery cloth and go over the motor armature .then try it again.you can take all the filters out and run it without the filters.that will help you narrow it down.please leave feedback
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
Loud motor
burning smell – Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
burning smell – Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
ANSWER : Beater brush is most likely blocked, belt is turning — UNPLUG UNIT, Clear obstruction and clean unit thoroughly… should be fine.
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
Hello, I have a problem with my Eureka Powerline bagged upright vacuum. It has a 12 amp motor and is model #4352, Type D. It was probably bought new in 1998. My problem is, while vacuuming today the motor seemed to slow down all of the sudden and then began smelling like burning rubber. I shut the vacuum off to check for blockages but could not find anything blocked. When I then turned it on again it runs but seems to only be running at 1/2 the motor speed and still has the rubber buring smell.
ANSWER : It sounds like a rubber sealing in the motor has come loose and is being constantly rubbed against the walls of the motor with would cause the smell and loss of motor speed caused by the fricton of rubber against the rod so if you can get to the motor try to open it and see if you can get it if not take it to a small engine repair service hope this was helpful:)
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
The original belt on my upright Kenmore Progressive broke and I replaced it with the spare that was in the vacuum. The vacuum and spare belt are about 10 years old. Then the spare broke after one vacuuming session and there was a burning smell coming from the vacuum. I ordered new belts and replaced it with the new belt. It seems to be working fine with no smell. I checked the belt after I vacuumed the family room and although it was in tact, the belt was very hot. Is that normal? Should t
ANSWER : The belt heats up due to the friction, as well as being in contact with the shaft of a hot motor. It is normal.
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
My dirt devil vacuum cleaner is not working – Dirt Devil M130000 ''i'' Dual Cyclonic Upright Vacuum Cleaner Vacuum
ANSWER : Please specify whether the vacuum motor does not turn on when you flip the switch or it simply does not have suction.
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?
ANSWER : Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=561283
.Generic problem for all Vacuums
.I replaced the belt on
.Posted by piggytail on May 01, 2008
.I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?
.
.Hello,
.I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
.The Royal Dirt Devil Featherlite Bagless Vacuum has just bushings in the ends of the brushroll and not bearings and once the bushings are bad I suggest that you replace the brushroll in the vacuum and put a new belt on the vacuum as well. There is no way to repair the bushing s in order to it to work properly. The suggested belt change is every 4 to 6 months and to store the extra belts in a Ziploc bag in the refrigerator to keep them fresh. Suggest looking at a local vac dealer. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://www.royalvacuums.com
.Customer Service
.For help with a model that is not working, if you want to check an order, if you need help finding a part or service center or have any other comment, complaint or question that is not a technical question about this web site use the link above. You can also call our Customer Service department between 8AM and 7PM EST Monday through Friday at (800) 321-1134.
.www.A-1Vacuum.com 1-800-657-1874 If you cannot find a local dealer near you they can ship you the parts UPS.
.Don – The Vac Man
.Go Ahead. Use Us.
.
.Generic problem for all Vacuums
.I replaced the belt on
.Posted by piggytail on May 01, 2008
.I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?
.
.Hello,
.I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
.The Royal Dirt Devil Featherlite Bagless Vacuum has just bushings in the ends of the brushroll and not bearings and once the bushings are bad I suggest that you replace the brushroll in the vacuum and put a new belt on the vacuum as well. There is no way to repair the bushing s in order to it to work properly. The suggested belt change is every 4 to 6 months and to store the extra belts in a Ziploc bag in the refrigerator to keep them fresh. Suggest looking at a local vac dealer. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://www.royalvacuums.com
.Customer Service
.For help with a model that is not working, if you want to check an order, if you need help finding a part or service center or have any other comment, complaint or question that is not a technical question about this web site use the link above. You can also call our Customer Service department between 8AM and 7PM EST Monday through Friday at (800) 321-1134.
.www.A-1Vacuum.com 1-800-657-1874 If you cannot find a local dealer near you they can ship you the parts UPS.
.Don – The Vac Man
.Go Ahead. Use Us.
.
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
Burning Smell Hi, I have a Rainbow E series that when I run the vacuum there is a burning smell. I have cleaned the entire unit and filter but still have the smell? I am afraid that the motor will burn out?
ANSWER : Check the carbon motor brushes, there might be arcing on the armature. New brushes may help if the armature is ok.
Read Full Q/A … : Dirt Devil UD40130 Featherlite Bagless Upright Vacuum
