Bissell ProHeat Deep Cleaner Upright Vacuum\015 I was using it and all of a sudden it started making a loud noise. It still works but it sounds like the motor is going or something\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If your machine is making an abnormally loud noise it is likely due to the belt slipping or the brush roll being incorrectly installed, follow these steps to resolve: Turn off and unplug machine. Use a Phllips-head screwdriver to remove 3 screws, 2 in the belt cover and 1 on the brush roll mount. Remove belt cover.
For something that`s designed to be used in a household with pets, the Bissell ProHeat 2X Revolution Pet is incredibly loud. Our sound meters showed us that this carpet cleaner produces about 86 dBA while active.
Worn out bearings on the brush roll will make a vacuum much noisier. This is a good time to check them after cleaning and inspecting the brush roll. Try spinning each bearing by hand. Some brush rolls have only one bearing on the roll, and the other bearing is in the head where the roll is mounted.
If you`re smelling rubber, the belt has either burned out and snapped or the belt has become so stretched out that the roller is not moving and the vacuum belt is getting super heated from the motors RPM.
Sound enclosures, noise reduction blankets, sound curtain noise barriers, or sound barrier walls are a few options to consider when reviewing noise reduction materials. If the vacuum pump is indoors, a noise enclosure would be the recommended solution.
Overall, Bissell is a popular vacuum brand for a reason – these vacuums are dependable and last up to two years without issue. However, some models are better than others when it comes to cleaning different surfaces.
However, the noise levels of vacuum cleaners fall between 75dB to 85dB. Thus, continuous exposure to such noise levels affect a user`s health while also being a sign and source of inefficiencies in the equipment.
Vacuum cleaners with a noise level between 71 and 75dB are loud. If you want to have a conversation with someone 2m away, you`ll have to raise your voice significantly. You also won`t be able to hear the TV without turning up the volume. We consider more than 76dB of noise very loud.
Living room music (76 dB); radio or TV-audio, vacuum cleaner (70 dB).
On average a brushroll should be replaced every year or two. If you`re not sure if the vacuum is working as good as it could or should be, replacing the brushroll can be an easy fix .
The typical life expectancy of vacuum motor brushes is around 800 to 900 hours of use; the bearings or the armature usually fails shortly after.
Brushes. According to iRobot, brushes should be replaced every 6-12 months. Robot vacuums like the iRobot Roomba j7+ have multiple brushes that allow it to clean.
How long do vacuum cleaners last? According to Consumer Reports, vacuum cleaners last a median of eight years. But the lifespan varies wildly by not only brand but your own personal use.
It`s caused by a worn-out motor belt. The burning smell can also be as a result of the rubber belt burning due to the loss of elasticity. All in all, the belt is worn out and needs replacement. To fix the burning smell problem in a vacuum cleaner, you will have to replace the motor belt.
What should I do? If your vacuum cleaner whistles, this is usually a sign that your device can`t suck in sufficient air. Often, it`s the dust container or bag that`s full. Check these first and exchange them if necessary.
Just empty the water out of the tank after each use. Doing so will prevent leaking and extend the life of your filter.
The BISSELL performs better on all surface types, and it has an alternative configuration for cleaning harder-to-reach places. However, the Hoover has better storing capabilities, a longer range, and virtually no recurring costs. It`s also significantly easier to maintain.
Bissell Crosswave Pet Pro All in One Wet Dry Vacuum Cleaner

A: Yes, you can leave clean formula/water in the tank when not in use.

How often should you vacuum fabrics, carpet, and rugs? Anything with fabric or upholstery needs frequent vacuuming. Dust settles deep into the fibers, holding onto pollutants, bacteria, and unwanted smells. Plan to vacuum carpet and area rugs at least twice per week, even if they don`t look dirty.
Another advantage of the Vacu-Maid Ducted Vacuum System is the lack of noise, noise is usually associated with vacuuming your home however Vacumaid systems are notoriously quiet.
If the cleaner becomes noisy or starts vibrating, it may be because some debris has got tangled around the brush roll or agitator situated in the bottom of the cleaner.
85 decibels is a noise or sound level equivalent to that of a food blender, heavy traffic while you are in the car, a noisy restaurant, or a cinema.
If the cleaner becomes noisy or starts vibrating, it may be because some debris has got tangled around the brush roll or agitator situated in the bottom of the cleaner.
Overheating usually occurs because the dust bag has not been emptied, filter has not been cleaned or there is a blockage in the floor tool, wand or bent hand piece. If your vacuum shuts down unexpectedly, make sure you turn the vacuum off and unplug it from the wall socket.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Hi folks,
my beam vacuum makes a very loud roaring noise quite often.
the problem started when i was vacuuming up a quantity of vermiculite from my chimney.
i think i overloaded the vacuum i think and it made this loud roaring noise.
the vacuum tends to make thos noise when i am hoovering after 5 minutes or so.
any ideas?.
thanks in advance Tom….
ANSWER : If the filter bag is bad and didn’t trap all of the dust, then it got into your motor, so you may have a problem with your motor now.

Brush bar does not turn & makes a loud noise
ANSWER : You need to clean your roller and replace the clutch assembly that drives the belts. poorly designed vacuum with many flaws.

I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?
ANSWER : Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=561283
.Generic problem for all Vacuums
.I replaced the belt on
.Posted by piggytail on May 01, 2008
.I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?
.
.Hello,
.I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
.The Royal Dirt Devil Featherlite Bagless Vacuum has just bushings in the ends of the brushroll and not bearings and once the bushings are bad I suggest that you replace the brushroll in the vacuum and put a new belt on the vacuum as well. There is no way to repair the bushing s in order to it to work properly. The suggested belt change is every 4 to 6 months and to store the extra belts in a Ziploc bag in the refrigerator to keep them fresh. Suggest looking at a local vac dealer. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://www.royalvacuums.com
.Customer Service
.For help with a model that is not working, if you want to check an order, if you need help finding a part or service center or have any other comment, complaint or question that is not a technical question about this web site use the link above. You can also call our Customer Service department between 8AM and 7PM EST Monday through Friday at (800) 321-1134.
.www.A-1Vacuum.com 1-800-657-1874 If you cannot find a local dealer near you they can ship you the parts UPS.
.Don – The Vac Man
.Go Ahead. Use Us.
.

Elna Top 300 sewing machine. I need manual to operate this machine. I have already found out that Elna contracted with Tiwan(excuse my spelling) to make there machine between 1989-1991. I want to know which machine made in Switzerland is comperable to this one. Thanks…Audrey
Sorry about the catagory…but you do not have sewing machine on list.
ANSWER : Isoj:
.
.I have this machine. I use it for my heavy sewing, as it will go through anything. I would be happy to copy the manual and send it to you for copy costs. Just let me know. I would love to know what knowledge you have gained about this machine. It does not appear to be an easy machine to find info on, may not have produced a lot? I had no idea it was not a European produced machine.
.
.Lisa

When I vacuum w/ the brush control in the on position it make a really loud noise, almost like a grinding sound. I have looked at it and nothing seems to be wrong, but I notice that the pin that engages the belt seems to vibrate a bit, possibly creating the noise. It started when I accidentally got part of a plastic grocery bag caught in the brush. Could it have stretched a belt? Nothing is caught any other place and it only makes the noise when the brush in in the on position.
ANSWER : Yes, the belt could have been stretched and is now vibrating and hitting other parts and creating a noise if much of the bag got caught under the belt. If you have another belt for this vacuum, please put it on and see if the noise stops. If it does, then problem solved, if not let me know and we can try something else and you can send a picture or video to me of the problem.

Let me know how this works out for you.

Benjamin

My brush roller stopped spinning so I had to take it off and clean out all the hair that had gotten wound around it. I replaces it and now it is make a lound noise, but only when the brush is on. Could it be the belt making such a loud sound? It wasn’t making this noise before.
ANSWER : Could very well be the belt..When cleaning the brush it is a good idea to add some WD40 at the ends where the plastic pieces are that hold the brush in the vacuum. The brush needs to be able to move freely around the plastic pieces..Add the WD40 and rotate the plastic pieces around the brush until they move freely..Reassemble making sure the belt is put in correctly so the brush moves in the right direction..
.Please provide a Thumbs Up if this solution is of help to you..Paul

My bissell momentum vacuum is making a very loud noise but it still picks everything up. Do you know of a reasons why it is making very loud noises. I checked and nothing is stuck in it.
ANSWER : It might be the motor or the fan is messed up.have someone or you check that out.

Loud noise I have a brand new Dyson and it is great on all my floors except one of my area rugs when it starts making this really loud vibrating noise. I am not sure why – nothing is stuck in the roller or vacuum and it doesn’t make it on any of my other rugs. Also it is really hard to push whereas all the other floors it just glides. I don’t want to return it but I also don’t want to hear this sound every time I vacuum.
ANSWER : This is the clutch as it jams up in the brush. Usually happens with rugs that are not secured to the floor.