Miele Cat & Dog 326i Bagged Canister Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The hard seal does not seal as well and this combined with the strong suction inside the Miele vac will pull dust and dirt particles out of the bag into the bag cavity.
Original Miele Vacuum Bags are made of fleece and this material, has been proven to trap dust better.
Miele`s vacuum bags should last you between two and three months. Combining the powerful suction of Miele`s bagged vacuum cleaners and a host of effective attachments, you`ll notice a huge difference in your cleaning abilities.
If you don`t have time to vacuum your floor every day, a robot vacuum can rescue you from annoying house dust, pollen, and pet fur, preventing you from allergies. For people who are susceptible to dust, a robot vacuum with mop in one can clean the floor frequently and regularly to keep their home dust free.
You may think you`re getting rid of the dust, dirt, and pet dander that trigger your allergies, but sometimes you may be stirring them up instead. One study found that some vacuum cleaners throw fine dust and germs back into the air, where they can set off allergies and spread infections.
With average use, a Miele vacuum cleaner bag should last for around three months. However, this can vary depending on your home and how often you vacuum. If you have a large home or wall-to-wall carpets, budget to replace your bag every month.
The bottom line. Many vacuum brands recommend changing the bag before it becomes full, at least every three months. The purpose of changing the vacuum bag when you need to is so that your vacuum cleaner is working at an optimal level.
The vacuum cleaner bags are made of porous woven material, usually cloth, paper or synthetic material. They act as an air filter. The tiny holes in the bag are large enough to let the air pass through but too small for most dust particles to go through.
Miele vacuum filters have to be replaced, Jonathan says. If your vacuum has a High-Efficiency Particulate Air (HEPA filter), you`ll know it`s time to replace it when the indication strip turns red. According to Miele owner manuals, this equates to about once a year.
The HEPA AirClean canister vacuum filter lasts approximately one year, and features a built‐in TimeStrip filter replacement indicator to take the hassle out of remembering.
Durability & Warranty – If you`re looking for a vacuum cleaner with durability and longevity, look no further than Miele. Miele vacuum cleaners are designed and tested to last for 20 years. Miele vacuum cleaners come with a 7-year warranty on the motor and a 1-year warranty on parts and labor.
Don`t be tempted to reuse vacuum cleaner bags. Your motives may be pure, but your air won`t be, and your vacuum cleaner may bite the dust (pun intended) years before its time.
Vacuum cleaners suck up all these tiny dust particles as well. Hence, the best vacuum cleaners clean your house along with helping your lungs breathe dust-free air.
Dusting first is particularly important if it has been some time since you dusted. The duster will become filled with particles and large clumps of dust will drop to the floor. Once upon a time, cleaning experts recommended vacuuming first. Old-style vacuums would kick up so much dust that dusting was done last.
Put cleaner bags and vacuum dirt, debris and lint in your black cart as garbage.
If you`ve recently remodeled, don`t vacuum up sanding residue or other tiny particles — you`ll need to use a more durable machine (like a shop vac) instead. “Fine dust will clog the filters or bag right away,” says Forte, and then the machine might begin spewing dust back into the air.
While many vacuum brands last only a few years, Miele vacuums are designed with an average lifespan of 20 years. This means most people will run through several new vacuums before it is time to replace a Miele vacuum.
It is often recommended, however, that dust bags are replaced when they`re around two thirds full or once a month. Daily and extensive use of vacuum cleaners will create a need to replace dust bags more frequently.
For dirt and residue, gently wash the vacuum cleaner bag with soapy water, rinse, and let air dry.
Don`t reuse vacuum cleaner bags

Don`t empty and reuse a vacuum cleaner bag. Bags often act as a filter, so the material of a used bag will be full of dust, and vacuuming with a reused bag is like cleaning with a full filter. This this puts excess strain on the motor and can result in poor suction.

“We would recommend vacuuming at least once or twice a week—and more often if we have pets—with the right tools to remove dust quickly and effectively,” Patel advises.
On average, a vacuum-sealed product under freezing conditions can last up to 5-6 months or even 1-2 years, depending on your freezer capacity. On the other hand, refrigerated vacuum-sealed products can last up to 1 to 2 weeks.
Definition of `dust bag`

1. the bag used in some models of vacuum cleaner for the collection of dust.

The Bag Filter is a dust control device whose purpose is removing the dust contained in the exhaust gases from industrial process. It is applied to the various applications with different temperature and type of gasses by selecting the filter media accordingly.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

While vacuuming the red light for the bag of the vacuum came on and the vacuum stopped. The bag was no where near full so I replaced it with a new bag – same problem. It vaccumes for a minute or then stops with bag light on. It is the correct bag for the machine – so what’s the problem?
ANSWER : I’m assuming this is the Epic 6500 or similar model.
.Detach the hose, turn vacuum on. If it runs, place palm of hand against inport hole. If it shuts off the problem is with either the control valve setting or the control valve assembly itself.
.For cvs, turn dial on top of vacuum all the way to the largest dot, and try above test again. If that doesn’t work, then it’s the CVA. It needs to be cleaned or replaced, which is an in shop job. Fro repair, take it to the nearest Aerus Electrolux store. I recommend a full clean and service to remove any dust/dirt from the motor, fan assembly, and other internal parts.
.
.Another problem, which relates to the dial setting, is that fine dust will quickly clog the pores of the bag, resulting in the machine “thinking” the bag is full. Turning the dial to the proper setting helps get the bag fuller. The middle setting is the normal setting, and is for areas without fine dust and sand.

I had the vacuum cleaner question about the canister and the wand/powerhead… the Kenmore Progressive Vacuum canister model 116.25812 and the canister not powering off without unplugging the vacuum. The solution I received that they both run on their own switch so it is normal makes sense. However, is there a power switch on the canister anywhere? The only way for the canister to be turned off is by unplugging it. Any ideas? One would think there would be a switch. I am new to fixya and hope
ANSWER : Hi. On some models, one switch controls all of the power. Your issue, which is no working switch is almost certainly a blown triac on the circuit board in the canister – kenmore part number KC86WBZRZ000

Looks like a common fault with this particular model judging by the number of complaints on the web.
.
.Take it to your local vacuum repair shop and they should be able to fix it for a nominal fee.

Overheated vacuum After I finished vacuuming the library last night I changed the bag and shook out both filters and vacuum would not restart. The canister unit felt real warm to the touch but I had been using it a least 1/2 hour non stop. The bag was pretty full but not overly so. It’s a Simplicity canister with power head. The carpet is long shag from the 70’s Did it just over heat? Thanks Shauna
ANSWER : It normally won’t over heat unless the bag is too full, the filters are clogged, or you have have a clog in the hose or down by the brush roll, the inlet may be clogged. Some will restart after a while, some others have a reset to push. If it won’t power on, then you have a problem and it will have to serviced.

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

When we turn on the vacuum, the canister falls open. The clips holding the canister in place do not seem to hold the canister tightly which I’m sure that it did in the past. The clips do not look bent, but every time we turn on the vacuum the intense pressure blows the canister open only remaining attached the the rest of the vacuum by one clip
ANSWER : Check filter and make sure it is kept clean at regular intervals. Possibly worn out clip retainers on cannister side due to excessive pressure build up. Do not force closure unless pressure is back to normal. May crack cannister or damage unit beyond repair.