Miele S514 Solaris Turbo Plus Vacuum\015 My turbo nozzle has no suction. Miele model s514\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Miele S514 Solaris Electro Plus Vacuum Cleaner Introduction

Sitting elegantly among their more deluxe midsize vacuum cleaners is the Miele S514 Solaris Electro Plus Power Team with its beautiful royal black finish.

Before we go any further, let`s remember that all Miele Vacuum Cleaners share some basic features: All Miele Vacuums come with a Quiet 1200 W motor. That means They all have the same suction power. They are all made of ABS Plastic, which makes them extremely durable but very lightweight.
A vacuum cleaner gets power from a regular electrical socket, with the average upright design requiring between 450 and 3000 watts. However, the most often used versions use around 1400 watts, equivalent to approximately 1.4 kilowatt-hours (kWh) of electricity each hour.
What is a Good Suction Power for a Vacuum Cleaner? An upright cordless vacuum cleaner should have at least 100 air watts to effectively clean a variety of floor surfaces, with the best Samsung vacuum cleaner reaching up to 210W*.
Miele Washing Machines are vigorously tested to last the equivalent of 20 years use. Miele Washing Machines are ecological and consume only the amount of water and electricity needed for excellent cleaning and rinsing results.
Established in 1996 as a joint venture with Melitta, the Dongguan plant has been fully owned by the Miele Group since 2009. Currently Miele produces the Swing H1, Compact C1, Compact C2 and Complete C2 vacuum cleaners here.
An upright vacuum cleaner should be around 100 air watts and a cylinder vacuum cleaner needs to be about 220 air watts.
As a central vacuum manufacturer we use the 120 and 240 volt motors. The 120 and 240 motors will not be adversely affected if used with lower voltages. The 120 volt motor will be fine on 110 volts. Likewise, a 240 volt motor will be fine on 220 or 230 volts.
Long Life Span

While many vacuum brands last only a few years, Miele vacuums are designed with an average lifespan of 20 years. This means most people will run through several new vacuums before it is time to replace a Miele vacuum.

Don`t throw it away, and never use your vacuum without a filter in place. Step 3: Purchase the correct HEPA or Charcoal filter for your machine.
With a power output of 1,200 watts, the Classic C1 canister vacuum offers excellent cleaning performance.
Manufactured in Germany the Miele Complete C3 line sets a new standard in floor care. Utilizing the 1200 watt Vortex motor allows the Miele C3 41GDE040CDN limited edition to effectively remove heavy sand and dirt from bare floors with very little noise.
Powered by the Miele Vortex motor and teamed with the SEB 236 Powerbrush, this Miele Complete C3 Brilliant vacuum cleaner is a complete 1440 watt Power Team.
A typical home vacuum cleaner consumes between 500 and 3000 watts of power. During active use, however, the best-selling model will require roughly 1400 watts on average. This amount of energy is comparable to that used by other household appliances like your microwave and refrigerator.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Miele turbo s514 power
ANSWER : If it has no suction take bottom peice off take out brush roll then run clothes hanger through dust channel to clear any blockage if none there its in your hose

The power brush floor rug attachment on my Eureka 6997 A Oxygen Canister Vacuum goes on an off as I use it. I replaced the The power cord from the handle has 2 plug in connections:
1 at the handle / upper wand
1 at the lower wand top of the power brush attachment

I replaced the entire wand assembly and it worked great for a year or so and now it’s doing the same thing again. I was told to keep the power switch on the handle set to off when connecting the power brush attachment or it will bu

ANSWER : This is from the prongs not making a good connection causing an arch inside the plugg causing what looks like rust on the plugg. I would try snugging up the connection by squeezing the female section to get a better connection on the prongs when it is plugged in together.

Was using my Miele Champagne vacuum, powered down, changed the bag, and now I have no power. I checked to make sure all lids were securely closed, still no power. Checked to make sure outlet was working, still no power…help.
ANSWER : Most likely the cord went bad, one side of it opened up, you will have to replace the cord reel asm. if this is the problem, Could also be a switch, electronic control or the motor.

Power head attachment works great when plugged into the hose part of the vacuum. The problem is when I attach it to the tube for normal use there is no power. I have checked all the connections and switched the power switch on and off still no power from tube to power head.
Is there anything else I can try? Model Callisto
ANSWER : Try having someone turn the machine on and off while you pull the cord in and out with the cord more angled towards the on/off switch. Sometimes these models have a break in the cord rewind and will not put the power through to the motor.

Keep in mind this is repairable, and if the unit is less than 5 years old it should still be under warranty.

Good luck .

When i hit the power button on my miele carina, it doesnt lock and stay on. i have to hold down the power button for the power to stay on. Please advise
ANSWER : Try a little WD-40 sprayed sparingly on the button. work the button a few times- may be sticky spring or contact. if that doesn’t work, check with retailer where you purchased it- see if you can get a replacement switch! if you’re handy, or have a handy friend, you can prob. replace it yourself!
good luck!

I have a miele S712 (2 yrs old worked fine yesterday) – I had been doing some diy work inside and had the vac on just to reduce some of the dust in the air – after a while the vacuum fizzled out. I guessed it had overheated and took it outside to cool down – when I tried to turn it back on pressing the power button gives it power and it starts to **** but it won’t STAY on, soon as you release the power button it stops, and the orange bag indicator is showing full. As I have a compressor I took
ANSWER : You have got dust in the micro switch and it is not latching on, if you look at this and clean it, that will solve your problem, however blowing the motir has probably wrecked the motor bearings.

No power i try to turn it on no power i treid different power source no luck check everything no power
ANSWER : It could be the switch button that you push to turn it on (2031199), or the switch (2031243) could be the problem. If not those 2, then the cord could be bad or even the motor (2031214). I would check that switch button first.

Power cord can not find replacement power cord for power brush attachment on kenmore canister vacuum, model #2491290 power brush attachment model # 5491290. i can not even find those model #’s anywhere online, not even partsdirect.com. any help would be great. thanks, david
ANSWER : Call 1-800-948-1358 ask for Buck mon.-fri. 9am-5pm est sat.9am-1pm est