Kenmore Vacuums\015 Vacuum has stopped working\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
The pressure ranges are placed into several groups: Rough/Low Vacuum: 1000 to 1 mbar / 760 to 0.75 Torr. Fine/ Medium Vacuum: 1 to 10–3 mbar / 0.75 to 7.5–3 Torr. High Vacuum: 10–3 to 10–7 mbar / 7.5–3 to 7.5–7 Torr.
In 2016 Eureka® was acquired by Midea America Corp, which created a partnership that combines Eureka`s special heritage with Midea Group`s extensive manufacturing capabilities and retail coverage.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
.The Whirlpool web site only redirects you to a web site for Kemflow which is pretty useless. It does not even contain contact information on the “Contact Us” page. After some research, I found the following company information:
.No. 3 Huan East Street
.Taiwan Pingtung Export Processing Zone
.Founded in 1981
886 8 752 4736
886 8 753 1524
.Generic problem for all Vacuums
.I own a self-propelled Hoover
.Posted by gohornsgo on July 17, 2008
.I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner’s manual and was wondering how to clean the HEPA filter on this model (*this model uses a vacuum cleaner bag also).
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best way to clean the HEPA filter is to take it outside and use a blower over the trash can and blow off the dust and dirt, or use things like an old paint brush and brush it off, or you can vacuum it off with another canister vacuum or shop vac if you have an extra one. For the best filtration is to replace it, there fore the air flow will catch most of the dust and dirt and then you would have to watch how fast it gets dirty and then do the maintenance.
.So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. – 7 p.m. EST
.Thanks, Don the Vac Man
Go Ahead. Use Us.
.When you get the belt on the the brush and the brush back in place, turn the brush a few times by hand to make sure it’s not catching on anything. After you get the powerhead put back together, do this again. It’s a common problem if the powerhead isn’t assembled correctly.
.Here’s a video clip from the Bissell site demonstrating changing the belt.
But before you do that, Confirm that the Socket is working
Make sure you did not pull the Cord out of the Connector inside