Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
First, check to make sure the clean tank has water and/or the water & formula mixture in the tank. If your tank is empty, this could be the reason your machine is not spraying. You will need to fill your clean tank again. Reseat the tank and ensure it sits snug on the machine.
The most common cause of loss of suction is that the filters have become blocked. They may require cleaning or replacing. Another cause could be that the vacuum cleaner hose is blocked.
No, this unit does not suck water.
Just Hot Tap Water
You can always clean up most of the mess with hot tap water. Then come back later with the proper Bissell cleaner, if needed.
Clog located in the vacuum hose
Turn the unit on and feel the suction at the end of the hose handle. If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end.
In Line Filter Assembly (includes Cap & Filter) for ProHeat 2X Upright Carpet Cleaners (equipped with In Line Filters) and Lift-Off Upright Carpet Cleaners. Fits in the top portion of the foot of the Carpet Cleaner, under where the Dirty Water Tank sits on the foot.
Locate the brush reset button on the lower back right of the vacuum. Press the button to reset the brushroll To ensure the brush has been reset, plug the vacuum back into the electrical outlet.
Debris like toothpicks and bobby pins as well as dirty filters can cause clogs to accumulate. Another possibility is the roller brush is so packed with hair that there isn`t enough airflow to suck the debris in.
If you`re wondering whether you can use the Bissell Crosswave without water, the answer is yes!
The BISSELL portable and handheld carpet washer are wet extraction models only. Please do not use as a dry vacuum. If you use as a dry vacuum, you may damage your deep cleaner and void your warranty.
You don`t have to use the Bissell solution, but it is optimized for use in their machines. This means it won`t streak, leave residue, need to be rinsed, or leave buildup in your machine.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I have a Bissell Proheat 2XTurbo carpet cleaner. No water will come out when I squeeze the trigger. I have filled the solution tank and the water tank. I read the troubleshooting in the manual and have tried turning it off for a minute and restarting and nothing. I took out both tanks and reseated them and nothing. It has sat for over a year but did not have any water in the water tank. Some solution was left in the solution tank. How can I make the water come out? HELP!
ANSWER :
Call BISSELL Consumer Services.
.
1-800-237-7691
.
Mon-Fri: 8am to 10pm ET
.
Sat: 9am to 8pm ET
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
My Bissell ProHeat 2x model 9200 is not sucking up water into the tank. The water is coming out the bottom of the cleaner.
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101.
.zcgb
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Bissell ProHeat 2x Upright Carpet cleaner-water tank valve
ANSWER : Www.usavacuum.com/category-s/387.htm
You can find the parts you need here
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet
ANSWER : Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn’t blocked as well.
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
I have a Hoover Platinum carpet cleaner, and it has stopped dispensing cleaning agent and water. This model has a separate tank for water and separate tank for shampoo dispensing. It also has a power hand unit that dispenses shampoo. All along the hand unit has continued to dispense shampoo. Symptom #1, the water tank seemed to be taking on shampoo, as it was getting sudsy. Symptom #2 – On wash mode, nothing would come out, on Rinse mode, sudsy water would come out. Later, symptom #3 – not
ANSWER : Somewhere on the outlet is a control tap thats driven by a rubber band and something is up with this control ,best advice here is put it in the boot of the car and take iot to a hoover dealer ,they will do it seconds for you
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Need instructions how to use Hoover Steam Vac Spin Scrub. I borrowed it from my Sister and she left it with no instruction book or letting me know how to operate it. I put water & cleaner in top tank. That’s all I know to do. Do I put any water in bottom tank? I figured not, since that is probably where the water goes when sucked up by vac. Do I leave lid on bottom tank? I usually use a commercial cleaner, and this is very different. I need to know NOW, as I must return it to her today, and I’m
ANSWER : I did have a solution in just a few minutes. Someone responded with a solution that gave me the website where I could go and print the manual in pdf, so did that, and checking instructions I was able to clean my carpets and get the shampooer back to my sister later the same day. I really appreciated your site and help I got for my problem. I found it on google. Thanks again!
.
.[email protected]
.
.[email protected]
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Hi I own a Bissell Proheat Powersteamer pro-tech with a turbobrush. I have been using “bissell multi-allergen removal formula for carpets and upholstery.” I ran out of that last night. Today I went to walmart looking for more. Everything I found said “2x Ultra Concentrated Bissell multi-allergen.” I’m confused on where to add the cleaner. I have a water tank and a separate soap tank. The instructions on this new cleaner bottle say to add 4 capfuls for the formula tank and dilute with hot tap wat
ANSWER : Hi,
Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.
Bissell Proheat Upright Wet/Dry Vacuum Problems
heatman101 .
.eytye
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Water doesn’t come out of my Bissel Deep Cleaner
ANSWER : When changing belts both must be changed at the same time because the pump belt will stretch out and will not run the pump right unless it is tight and the brush belt will break or slip so both must be changed together at the same time. this is how I solved the water problem with my bissell power steamer model 1697-w..hope this helps.
Read Full Q/A … : Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
